Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator 2004 - Panels | |
| VFR/Landing View for "Level-D Simulations: The 767" |
|
File Description:
After a lot of hard work, and help and advice from 757/767 captains, I'm proud to release this small add-on for "Level-D Simulations: The 767"! This view has been verified by pilot's to be close to the "real-thing"! I have created two styles of these panels. One with the Radar-Altimeter tape (like AAL and Delta use on their 767-300s) and one without (like UAL). Both were made to work more seemlesly with PIC 767. Landing your 767 will never be the same again... Special thanks to "Jake" at www.airliners.net; without his input and photos, this panel would not exist.
DISCLAIMER: THESE FILES ARE THOROUGHLY TESTED. HOWEVER, THEY ARE TO BE USED AT YOUR OWN RISK!!!
Level-D is not responsible for any modifications to their product. Send an E-Mail to [email protected] with any comments or technical difficulties!
| Filename: | VFRLanding_View_for_LevelD_Simulations_The_767.zip |
| License: | Freeware, limited distribution |
| Added: | 18th October 2005, 10:22:05 |
| Downloads: | 5,292 |
| Author: | Philip A. Geddes |
| Size: | 863.24 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Toronto Downtown Airport CYTZ Ontario, Canada |
|
Images related to this file:
File Description:
CYTZ is on an island in Lake Ontario and immediately adjacent to downtown Toronto. This updates the version made by Flight Ontario as there have been major changes since Porter Airlines purchased the airport. The obvious and main new item is the terminal, made with photo textures and with ten gates sized to accomodate the Dash 8-400 they currently use. The terminal has a passenger entrance and a vehicle setdown point as part of the link to the ferry terminal that wraps around the west side of the original and preserved terminal building. The ferry terminal is included here, along with a ferry. Also new are the car parking, road routing, gate and taxi markings, taxiways, taxiway signage, taxiway lighting, runway lighting, aprons, apron lighting (from Sid Schwartz and you will need to install his "lights_ss_v2"), fences, fuel tanks, tanker trucks, access roads to navigation equipment, ai parking, static parked planes, parked cars, apron equipment, and the useable floatplane ramp. The AI includes Porter, Jazz, several GA aircraft, and a helicopter. Only 3 of these require downloads. The Lake Ontario AI includes three large ships, typical of the traffic to be seen on all the Great Lakes. CYTZ has three runways and there is an airport diagram included. 08-26 has ILS and is the only runway actually long enough to be used by Porter; FS9 atc will ignore this. There is fuel available and it is dispensed from a truck. The longer projection from the front of the terminal building is a covered ramp that leads up from the terminal basement level, used by towed luggage trolleys. The gates are not powered in any way except for the weather cover that protects passengers as they cross the small area of asphalt between plane and gate. I did not try to reproduce this in FS9.
| Filename: | Toronto_Downtown_Airport_CYTZ_Ontario_Canada.zip |
| License: | Freeware, limited distribution |
| Added: | 23rd October 2012, 12:52:14 |
| Downloads: | 1,806 |
| Author: | Roger Wensley + Flight Ontario |
| Size: | 12.43 MB |
| Category: Prepar3D V1-4 - Aircraft Repaints, Textures and Modifications | |
| PC12 External Power V2 - using overhead switch |
|
Images related to this file:
File Description:
This is version 2 of my mod for the payware Carenado Pilatus PC12. It adds external power to the airplane using the switch in the overhead panel. To activate the external power simply click at the EXT PWR switch in the overhead panel. EXT PWR will illuminate at the top of the left AMP VDC Display in the overhead panel while it's activated. Do deactivate simply click the switch again. In order to use this you need the original payware Carenado PC12, Bert Pieke's panel mod and a gauge by Doug Dawson. These files are not included. The readme contains the informations where to get the required files and how to install.
V2: Using the switch in the overhead panel instead of a clickspot. Added information on how to use in FSX
| Filename: | PC12_External_Power_V2__using_overhead_switch.zip |
| License: | Freeware |
| Added: | 20th December 2019, 16:26:30 |
| Downloads: | 332 |
| Author: | Alexander Grueb |
| Size: | 168.97 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Learner Aircraft --Cessna 172-- |
|
File Description:
This is the standard FSX Cessna 172 with a custom panel to enhance learning the principles of Flight and Navigation. Large gauges are on the panel plus digital readouts for most of the gauges so that there will be no guessing of the readings. The view over the panel is 50% larger than the default Cessna 172. Not on the panel are most of the non-flying gauges such as fuel gauges, engine instruments, engine controls, etc. The intent was to keep the panel uncluttered. Thanks to Norman Hancock and Dave Bitzer for the non-standard gauge designs, and to Tom Goodrick for the great auto-start/auto-stop flight timer and to Kyle Copeland for the fine panel Bitmap. Easy install self-extracting file. By Charles Wood.
| Filename: | Learner_Aircraft_Cessna_172.zip |
| License: | Freeware |
| Added: | 16th January 2009, 11:10:06 |
| Downloads: | 707 |
| Author: | Charles Wood |
| Size: | 1.99 MB |
| Category: Navigation and ATC - Navigation | |
| Caribbean World Aeronautical Chart Chunks for FSMap |
|
File Description:
Sectional chart chunks made from the August 2009 Sectional charts at the original scale, formatted in the WGS84 lat/long geographic coordinate system for the FSMap, moving map application for flight simulation use.
Coverage is the Bahamas, Cuba, Jamaica, Haiti, the Dominican and the Guadeloupe island areas.
The chart chunks are baseline 8bit tiffs with packbit compression applied that are 2750x2480 pixels at about 6.5mb each. Also, included is the FSMap fsm Calibration file for importing. The Caribbean jpegs that were previously uploaded, I lowered the gamma quite a bit due to WAC being too harsh to view on the display. With these tiffs I left them as is, because of the dimming feature in the FSMap gauge, one of the many great features the FSMap package has to offer.
| Filename: | Caribbean_World_Aeronautical_Chart_Chunks_for_FSMa.zip |
| License: | Freeware |
| Added: | 19th March 2010, 01:16:53 |
| Downloads: | 778 |
| Author: | David Myers |
| Size: | 84.36 MB |
| Category: Flight Simulator 2004 - Flight Plans | |
| OB-10 Hawthorne Nevada |
|
Images related to this file:
File Description:
FS2004 Flight Plan for OB-10 Hawthorne Nevada IFR high speed low altitude military training route. This is the third in a series of flight plans I have uploaded . This route goes through both mountainous and flat and rolling terrain in California, and Nevada. These are great routes for B-52, F-111, B-1B, B-2 A6, A4, Vulcan and any fighter or bomber enthusiasts. Of course you can fly the route with any aircraft of your choice. Included in this package is a gauges by Karol Chlebowski for TFR flying at very low altitude. This gauge will greatly enhance your ability to fly these challenging routes and is a great companion of the flight plans. Another option to download Version 2.0 of my FS2004 mini panel which has all this functionality and more.
| Filename: | OB10_Hawthorne_Nevada.zip |
| License: | Freeware |
| Added: | 27th July 2011, 23:00:38 |
| Downloads: | 86 |
| Author: | Bill McClellan |
| Size: | 458.56 KB |
| Category: Flight Simulator X - Gauges | |
| Baron Digital Engine Panel for FIP |
|
Images related to this file:
File Description:
For Saitek Pro Flight Instrument Panel. This folder contains two engine panels, digital type, for Beech Baron. The difference between the two panels is the position of the fuel tank gauge, oil gauges, trims, flaps and gears lights. The package includes a serie of coloured needles that can be changed easily, just replace the default needle by the one of your choice. Default needles are white for left engine parameters and blue for right engine parameters. Left tank needle is green (more visible), right tank needle is blue.
Both Baron_digit_engine.xml provide: Manifold pressure, Fuel flow, Oil temperature, Oil pressure, Propeller RPM, Cylinder Head Temperature, Exhaust Gas Temperature, Fuel level for the left and right tanks, Pitch, Rudder and Aileron trims, Gears down and in transit lights, flaps positions and in transit lights.
| Filename: | Baron_Digital_Engine_Panel_for_FIP.zip |
| License: | Freeware |
| Added: | 31st March 2012, 14:35:58 |
| Downloads: | 505 |
| Author: | Philippe Verhaege |
| Size: | 928.81 KB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Learner Aircraft --Cessna 172-- |
|
File Description:
This is the standard fs9 Cessna 172 with a custom panel to enhance learning the principles of Flight and Navigation. Large gauges are on the panel plus digital readouts for most of the gauges so that there will be no guessing of the readings. The view over the panel is 50% larger than the default Cessna 172. Not on the panel are most of the non-flying gauges such as fuel gauges, engine instruments, engine controls, etc. The intent was to keep the panel uncluttered. Thanks to Norman Hancock and Dave Bitzer for the non-standard gauge designs, and to Tom Goodrick for the great auto-start/auto-stop flight timer and to Kyle Copeland for the fine panel Bitmap. Easy install self-extracting file. By Charles Wood.
| Filename: | Learner_Aircraft_Cessna_172.zip |
| License: | Freeware |
| Added: | 14th January 2009, 14:53:43 |
| Downloads: | 2,158 |
| Author: | Charles Wood |
| Size: | 3.96 MB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Cessna 414A Pressurized Business Twin |
|
File Description:
The Cessna 414A is a 6-8 place pressurized twin used mainly by businesses. It has an 8,000 ft cabin at 23,000 ft. The pressurization allows you to fly the plane at 25,000 ft at 225 knots making climbs and descents at much higher rates than in unpressurized aircraft. This aircraft is very easy to fly although it is fully realistic regarding power settings, climb rates, cruise speeds and stall speeds. Stall speed is 72 KIAS so you can land it at a about 90 KIAS. The modern panel includes a PFD and an MFD/GPS with digital xml gauges by the author. A cabin altitude gauge is a guide to managing your descent from high altitude. This original model, the flight dynamics and the digital panel are by Tom Goodrick using Abacus' FSDSII Pro.
| Filename: | Cessna_414A_Pressurized_Business_Twin.zip |
| License: | Freeware, limited distribution |
| Added: | 2nd June 2004, 00:40:43 |
| Downloads: | 3,404 |
| Author: | Tom Goodrick |
| Size: | 1.04 MB |
| Category: Flight Simulator X - Panels | |
| Pushback Panel v3.0 for FS9/FSX/P3D3/P3D4 |
|
Images related to this file:
File Description:
More than 10,000 virtual pushbacks were done by previous versions of this panel. It's time to upgrade to v3.0! Planning an international flight to Eastern Europe or Russia? Version 3.0 has an additional Pushback Truck Switch Panel that makes it possible to choose between English and Russian groundcrew to use both in one flight. You can still use a standalone panel either English or Russian like in versions v1.0 and v2.0. Includes Brake Sound FX. Supports FS9, FSX, and all versions of P3D including v4.0 and later. Based on Groundhandling gauges by Rob Barendregt and Doug Dawson's XML Sound Gauge. The panel is intended for aircraft Pushback procedures. NOTE: Before installing the version v3.0 it's recommended to remove all previous versions of the Pushback Panel. The panel review: https://youtu.be/_DCAzLg-w2k
| Filename: | Pushback_Panel_v30_for_FS9FSXP3D3P3D4.zip |
| License: | Freeware, limited distribution |
| Added: | 18th January 2019, 18:13:39 |
| Downloads: | 986 |
| Author: | Gene Churumov |
| Size: | 1.74 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |