Category: Flight Simulator X - Gauges
V-One Gauge for B737-200/Adv with Call-outs

File Description:
This gauge is written specifically for Captain Sim's B737-200 and B737-200Adv aircraft (http://www.captainsim.com/products/x737/). It will inform you of appropriate take-off speeds (V-speeds), take-off trim units, Vref landing speeds, elapsed flight time, fuel used, optimum cruise altitude, optimum ERP setting and Maximum Climb Thrust (MCT). It will also indicate when the aircraft's gross weight has been exceeded and if an incorrect flap has been set. Take-off speeds are adjusted for altitude and temperature values. Flight time and fuel used can be reset at any time by clicking on their respective displays. Provisions have been made to allow user adjustments to Optimum Altitude, Optimum EPR and Center of Gravity values. Seven F/O take-off call-outs are included: 80 knots, V1, VR, V2, Gear-up, Flaps-up and Slats Retract.

Filename:	VOne_Gauge_for_B737200Adv_with_Callouts.zip
License:	Freeware, limited distribution
Added:	22nd May 2012, 03:36:23
Downloads:	2,082
Author:	Paul Tally
Size:	1.04 MB

Category: Flight Simulator 2002 - AFCAD Files
KDTW Runway 22R

File Description:
I modified Richard Mohammed's DTW afcad file to activate Runway 22R at DTW. It seems to work allright. Aircraft takeoff on 22L and land on 22R. I would back up your current DTW afcad in case you do not like the modifications I made.

Filename:	KDTW_Runway_22R.zip
License:	Freeware
Added:	23rd August 2002, 01:30:57
Downloads:	558
Author:	Matt Krochmalny / Richard Mohammed
Size:	11.82 KB

Category: Flight Simulator 2004 - Miscellaneous Files
Checklist - Procedures for the Beech King Air 350

File Description:
PDF file format. Normal procedures-checklist: before starting engines, after starting engines, taxi, before take-off, climb, cruise, descent, approach, before landing, after landing, parking, taxi.

Filename:	Checklist__Procedures_for_the_Beech_King_Air_350.zip
License:	Freeware
Added:	30th October 2005, 18:23:33
Downloads:	958
Author:	Darío Hereñú
Size:	44.48 KB

Category: Flight Simulator 2004 - Gauges
ComGold Radio

File Description:
FS2004 Gauge: ComGold Radio. This deluxe, state-of-the-art radio contains a full array of displays including active and standby frequencies for Com1, Com2, Nav1, Nav2, ADF1, and transponder code. Frequencies are entered directly into both active and standby memories of all radios using CG's numeric keypad. Values can be entered into the radios or transponder both automatically or manually. ID's of active nav frequencies are displayed if signal strength is sufficient. Signal strength is animated accurately using data based on numerous attenuation tests. Gauge provides automatic checking for erroneous data entry. Panel or window installation. Uses existing radio icon when replacing default radios.

Filename:	ComGold_Radio.zip
License:	Freeware
Added:	29th March 2006, 04:29:35
Downloads:	5,213
Author:	Glenn Copeland
Size:	188.29 KB

Category: Flight Simulator 2004 - Gauges
Go Around an autopilot enhancer

File Description:
FS2004 Gauge: GoAround, an autopilot enhancer for fixed wing aircraft. If your go-around procedure resembles a tailless kite in a thunderstorm, then upgrade your autopilot with this tiny, but powerful add-on. This wave-off wonder will provide co-piloting assistance as it reconfigures the aircraft from an approach to a go-around. After applying power and setting the autopilot to circuit altitude and heading, the gauge cleans the aircraft of all extended surfaces as it sequences through timed routines designed to cause a minimum lose in lift. GoAround is useable at very small sizes and can be installed on any panel. By Glenn Copeland.

Filename:	Go_Around_an_autopilot_enhancer.zip
License:	Freeware
Added:	28th August 2006, 02:36:24
Downloads:	2,498
Author:	Glenn Copeland
Size:	131.81 KB

Category: Flight Simulator 2002 - AFCAD Files
Simflyers KLAX AFCAD 2.1

File Description:
INSTRUCTIONS AND MORE INFO INCLUDED IN ZIP FILE. INCLUDES 3 OVERLAYS. Hi, I've created these AFCAD files for the Simflyers LAX scenery, as I could not find anything that was truly a; realistic, and b; functioned properly with the MS Fltsim 2002 AI. I've spent many hours testing and tweaking these AFCAD files, so I hope they are perfect enough to be widely used. However, I do stress that some previous experience of using AFCAD and changing aircraft radius sizes will be necessary. Please report any faults which may be discovered! Design tips for the future are always very useful! WHATS NEW FOR 2.1: I have changed the direction of takeoff / landing for all of the runways, as the AI appears to behave a lot better this way (less likeliness of aircraft getting stuck!). This has allowed me to move all of the runways used by the KLAX overlay to the north side of the airport, reducing the chances of aircraft landing on top of one another. KLAX also now has some extra Ramp GA Large bays to accomodate for all of the American Eagle Saab 340's! Finally, I have cleaned up the AFCAD removing unecessary nodes etc.

Filename:	Simflyers_KLAX__AFCAD_21.zip
License:	Freeware, limited distribution
Added:	19th July 2003, 01:41:28
Downloads:	671
Author:	Carl Edwards
Size:	127.41 KB

Category: Flight Simulator X - Gauges
V-One Gauge for Captain Sim L-1011/F V1.3

File Description:
This is an updated V-One gauge for Captain Sim CS L1011 v1.3 The following changes are in this version release:

1. V-One code optimized to FSX xml. 2. Sounds are played using Captain Sim's sound module. 3. All voice recordings have been re-recorded. 4. Maneuvering speed display corrected to match L-1011 alpha control for flaps-up. 5. Sounds for call-outs call be toggled on-off. 6. Current trim displays Captain Sim's trim value (trim value does not match visual trim wheel). 7. Decision Height Set Knob (Captain's side) controls 'Minimums' call-out.

List of features: Approximately 40 sounds integrated into gauge. Take-off V-Speeds calculated for Flaps 10, 18 or 22. Take-off command speed automatically set for V2 + 15. Maneuvering speed displayed for flap selected. Optimum altitude and optimum EPR (EPR calc for M.84) continually calculated. Take-off trim calculated for current gross weight. Current Altitude, EPR, Speed (knts), Flaps and Trim displays via toggle. Display units can be toggled between LB and KG (default LB). Re-settable flight timer. Re-settable fuel use. Selectable Vref landing configurations, Vref33 (default) or Vref42. ZFW, Fuel, CG, Gross Weight and Barometric Pressure MSL (QNH) displayed.

Filename:	VOne_Gauge_for_Captain_Sim_L1011F_V13.zip
License:	Freeware, limited distribution
Added:	25th October 2015, 11:00:24
Downloads:	2,041
Author:	Paul Tally, Stefan Liebe, Jimmy Foong
Size:	3.93 MB

Category: Flight Simulator 2002 - Panels
America West B737-400 Dreamfleet Panel Merge

File Description:
Default FS2002 B737-400 model repainted in America West scheme with Dreamfleet panel and F/O Vspeeds Callout gauge. Comes with installer and doesn't overwrite any original files. Modified to make use of the virtual cockpit. You need Dreamfleet's Greatest Airliners B737-400 installed on your system!

Filename:	America_West_B737400_Dreamfleet_Panel_Merge.zip
License:	Freeware
Added:	21st December 2002, 16:16:47
Downloads:	1,882
Author:	Patrizio Fangio
Size:	4.02 MB

Category: Flight Simulator 2004 - Panels
CRJ Update

File Description:
This update brings my original crj panel to FS9 functionality. The panel now includes Lee Hetherington's TCAS/Transponder system, the FS9 GPS with autopilot integration, and retains Tom Woods' HUD and Bill Morad's ATC panel. A few gauge issues were also resolved. Panel by Leon Seale.

Filename:	CRJ_Update.zip
License:	Freeware, limited distribution
Added:	7th October 2004, 03:28:53
Downloads:	14,745
Author:	Leon Seale
Size:	2.53 MB

Category: Flight Simulator 2004 - AFCAD Files
FRF-Studio Pittsburgh International Airport AFCAD2 Update

File Description:
I have modified FRF-Studio's Pittsburgh International Airport scenery to make it more realistic. All the gates at the E concourse are removed (E is now extra security checkpoints), and US Airways' C gates are now fair game, and not assigned to them. Using PIT's website, www.flypittsburgh.com, as an aid, I corrected some assignments to gates, and have even added some airlines' RON gates. The cargo gates are wrong, and have been placed where they belong, and are correctly assigned. Gates on the ramp next to 10C-28C are now GA Large gates, but if you have a lot of AI, you can change them to normal gates with AFCAD2. The runways have not been touched, because when was the last time you've seen a 32 takeoff or a 14 landing?!? You will need FRF-Studio's PIT scenery for best results.

Filename:	FRFStudio_Pittsburgh_International_Airport_AFCAD2_.zip
License:	Freeware
Added:	15th July 2006, 03:26:41
Downloads:	577
Author:	Chris Wohlgemuth
Size:	58.69 KB