Category: Flight Simulator 2004 - Scenery
CNZ3 - Chatham-Kent - Ontario, Canada V1

Images related to this file:

• CNZ3__ChathamKent__Ontario_Canada_V1_1.jpg
• CNZ3__ChathamKent__Ontario_Canada_V1_2.jpg
• CNZ3__ChathamKent__Ontario_Canada_V1_3.jpg
• CNZ3__ChathamKent__Ontario_Canada_V1_4.jpg

File Description:
This is partly part of the Small Ontario Fields series. The airport ICAO was changed from CNZ3 to CYCK in November 2012; I have left it as it was. The runway too remains as it was a few years ago. Chatham is located 50 miles east of Detroit and 150 miles southwest of Toronto, between Lake St. Clair and Lake Erie, and the airfield is southeast of the town. There is a single asphalt runway 5,000 feet long and 75 feet wide, aligned 05/23 in FS9 but in fact in real life now 06/24 due to the wandering magnetic north. The apron is on the northern side of the runway at the eastern end, with added taxiways to cater for newer hangars wearing identical colour schemes. There is fuel, runway lighting, some taxiway lights, visitor parking on the grass, and plane maintenance in the large hangar beside the small terminal building on the north side of the apron. There is a train station in the middle of the town, and no scheduled flights to the airport that is 8 miles away; these two facts may be connected. Ditches along the road and around much of the airfield provide separation, which is why the fences are not continuous. If you are on the runway and find your path to the apron blocked by another plane that is stationary at the hold short, continue past the first turnoff to the threshold markers and turn off the runway and wait. The AI plane will then taxi out and you will have a clear path.

Filename:	CNZ3__ChathamKent__Ontario_Canada_V1.zip
License:	Freeware, limited distribution
Added:	27th August 2015, 21:02:59
Downloads:	341
Author:	Roger Wensley
Size:	9.89 MB

Category: Flight Simulator 2004 - Utilities
FlightSim Manager 2.4.0

File Description:
Compatible with both FS2002 and FS2004

Please ensure you are downloading the very latest version by doing a search on my name first.

FlightSim Manager is a great tool for managing add-ons to Microsoft Flight Simulator. Using easy to Wizard - FSM can install aircraft, panels, textures and scenery directly from distribution ZIP files you may have downloaded, with proper uninstallation of add-ons. From an easy to use Aircraft editor to add or remove aircraft variants, to an comprehensive Hangar management allows you to manage and configure your add-ons off your live FS installation.

Using FSM, you can create Texture Sets - i.e.. different Tree Sets, and you can install the texture with a single click, capture screenshots from Flight Simulator, and launch it with random Splash Screens, and fly from anywhere in the world using an map view.

You can also control Flight Simulator with speech commands using FSM. Other features include Benchmark Flight Simulator, Repository support and set of diagnostics tools.

Version 2.4 also enhaces the Pilot-mode, with auto-saving flight, warning sytem, and voice recognition.

Installation -

Please use the setup.exe file. If you wish to uninstall the software, you can do so from Control Panel - Uninstall software.

You can find the latest version from -

http://www.ranainside.com/

To request any new feature, or to submit bugs, please visit our forum at

http://softwares.ranainside.com/

Filename:	FlightSim_Manager_240.zip
License:	Freeware
Added:	4th August 2004, 20:55:28
Downloads:	2,978
Author:	Rana Hossain
Size:	3.77 MB

Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications
KLM Douglas DC-3 pre-war

Images related to this file:

• KLM_Douglas_DC3_prewar_1.jpg
• KLM_Douglas_DC3_prewar_2.jpg

File Description:
Re-upload. FS2004 KLM Douglas DC-3 pre-war textures.

Before and after World War II, KLM was a major European operator of the Douglas DC-3. The first DC-3, PH-ALI 'Ibis', entered service with KLM in October 1936. This made KLM the first operator of the DC-3 in Europe.
22 others would join before Nazi-Germany invaded the Netherlands on 10 May 1940 and occupied the country for five dark years. Those DC-3's present at Amsterdam-Schiphol, if not destroyed by bombs, were impounded by the Germans. Other DC-3's that happened to be elsewhere out of reach of the enemy found their way either to the Dutch East Indies where they served on the KNILM routes until the Japanese invasion in February 1942, or to England where they were leased by BOAC for the London (later Bristol) to Lisbon service.
Both PH-ALI 'Ibis' and PH-ARW 'Wulp' moved to England. Unfortunately they did not survive World War II. The 'Wulp' was destroyed in November 1940 when Bristol got bombed by the German Luftwaffe. The 'Ibis' was shot down by Junkers Ju-88's on 1 June 1943 over the Bay of Biscay.

The repaints of PH-ALI and PH-ARW are based on the templates Mark Beaumont created for the MAAM-SIM Douglas DC-3 (passenger version), which were based on Jan Visser's original textures. These are textures only. You will require MAAM-SIM's great donationware Douglas R4D/DC-3 package. Repaints by Maarten Brouwer.

Filename:	KLM_Douglas_DC3_prewar.zip
License:	Freeware, limited distribution
Added:	12th June 2010, 01:16:55
Downloads:	666
Author:	Maarten Brouwer
Size:	10.05 MB

Category: Flight Simulator X - AFCAD Files
Vineland-Downstown Airport (28N), NJ

File Description:
Located 04 miles NE of Vineland, New Jersey on 45 acres of land, Vineland-Downstown Airport is a turf field that mainly services crop dusting operations for the surrounding farms. It also can serve firefighting aircraft - in fact the second runway (12/30) is specifically for that purpose along with agricultural use. This airport as modeled in FSX is kind of inbetween the current layout and the past layout. Based on various images both satellite and other, it seems 28N has undergone some serious expansion since the MSE textures were created. A large paved area to the west of the airport has been built and has parking aprons for up to around 25 aircraft. If you use an add-on traffic program you might want to think about reconfiguring it to assign more flights to this airport because it can certainly handle them now. You can fuel up in your plane by stopping near the fuel tank on the north end of the west tarmac or in your helicopter by landing on the concrete patch north of the runway. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	VinelandDownstown_Airport_28N_NJ.zip
License:	Freeware
Added:	11th October 2010, 06:13:42
Downloads:	206
Author:	Drew Sikora
Size:	324.96 KB

Category: Flight Simulator X - AFCAD Files
Mount Pleasant Landing Strip Airport (67NJ), NJ

File Description:
Located 01 miles S of Hainesburg, New Jersey on 192 acres of land, Mount Pleasant Landing Strip Airport is a private turf field. The strip itself is 2100 feet in length over fairly level ground. There is no hard-surfaced grass runway in place, so setting your mesh to the highest resolution is recommended as you will be landing on bare terrain. Next to Runway 06 is a path through the trees you can taxi along to get to a hangar - although it is not available for transient aircraft and is closed. Collision with the trees along the path near the hangar and the static aircraft parked near it is disabled to make it easier to move through this relatively tight area. Immediately beyond the hangar is a clearing with ample room to turn around to taxi back out. You can also start parked in front of the hangar. The windsock is located a few feet west of the hangar and is not lit. The runway also has no edge lighting so daytime VFR operations only are recommended for this airfield. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Mount_Pleasant_Landing_Strip_Airport_67NJ_NJ.zip
License:	Freeware
Added:	7th February 2011, 23:49:26
Downloads:	198
Author:	Drew Sikora
Size:	468.64 KB

Category: Flight Simulator X - AFCAD Files
Salem Airfield Airport (NJ74), NJ

File Description:
Located 01 miles E of Salem, New Jersey on 14 acres of land, Salem Airfield is a private turf strip 2200' in length. The hard surface runway has been removed so have your mesh settings as high as possible to get the most out of landing/taking off on actual terrain. The surrounding area has been highly detailed with as much forestation as possible included to block out the horizon as much as possible considering the many open spaces surrounding the airport. Tie downs are located next to the middle of the runway, look for the marker cones or start in any RAMP_GA_SMALL parking locations. A hangar is available as well, and attendant is on call on NAV2 to open the door. You can start inside the hangar in the DOCK_GA parking spot or outside the hangar in the RAMP_GA parking spot. All parking is for aircraft with wingspans no greater than 40 feet. There is no fuel available. The field is lit for night use, but the windsock is not so check your weather before flying in! Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Salem_Airfield_Airport_NJ74_NJ.zip
License:	Freeware
Added:	10th August 2011, 02:05:51
Downloads:	176
Author:	Drew Sikora
Size:	910.96 KB

Category: Flight Simulator X - AFCAD Files
Greenwood Lake Airport (4N1), NJ

File Description:
Located 01 miles E of West Milford, New Jersey on 150 acres of land, Greenwood Lake Airport is a public asphalt strip that services small to medium GA air traffic. The second runway that used to be there has been re-paved and now serves as extra aircraft parking. You can park anywhere on the closed runway, along the edge of the main tarmac where the terminal building is, or between any two white cones (50 foot max wingspan) that mark tie-down locations in the middle of the main tarmac. A helicopter start is provided as well. For parking, Small GA spaces are for craft with wingspans of less than 50 feet; Medium GA spaces are for craft with wingspans from 50-60 feet. The glide slope for Runway 24 has been adjusted up from 3.5 degrees to 4 degrees as in real life the runway sits higher than the ground the trees grow from so this will give you proper clearance on approach. Fuel is available by stopping near the tank on the main tarmac. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Greenwood_Lake_Airport_4N1_NJ.zip
License:	Freeware
Added:	22nd July 2011, 03:59:26
Downloads:	479
Author:	Drew Sikora
Size:	1.98 MB

Category: Flight Simulator 2004 - Utilities
FlightSim Manager 2.4.0

File Description:
FlightSim Manager 2.4.0 Compatible with both FS2002 and FS2004

FlightSim Manager is a great tool for managing add-ons to Microsoft Flight Simulator. Using easy to Wizard - FSM can install aircraft, panels, textures and scenery directly from distribution ZIP files you may have downloaded, with proper uninstallation of add-ons. From an easy to use Aircraft editor to add or remove aircraft variants, to an comprehensive Hangar management allows you to manage and configure your add-ons off your live FS installation.

Using FSM, you can create Texture Sets - i.e.. different Tree Sets, and you can install the texture with a single click, capture screenshots from Flight Simulator, and launch it with random Splash Screens, and fly from anywhere in the world using an map view.

You can also control Flight Simulator with speech commands using FSM. Other features include Benchmark Flight Simulator, Repository support and set of diagnostics tools.

Version 2.4 also enhaces the Pilot-mode, with auto-saving flight, warning sytem, and voice recognition.

Installation -

Please use the setup.exe file. If you wish to uninstall the software, you can do so from Control Panel - Uninstall software.

You can find the latest version from -

http://www.ranainside.com/

To request any new feature, or to submit bugs, please visit our forum at

http://softwares.ranainside.com/


Programmer

Rana Hossain
[email protected]

Filename:	FlightSim_Manager_240.zip
License:	Freeware
Added:	4th August 2004, 20:49:50
Downloads:	11,171
Author:	Rana Hossain
Size:	3.77 MB

Category: Miscellaneous Files - Miscellaneous Files
79C - Brennand Airport - Neenah, Wisconsin - USA

Images related to this file:

• 79C__Brennand_Airport__Neenah_Wisconsin__USA_1.jpg

File Description:
Well this is my 1st attempt at creating/editing an airport so be gentle. I created all the models in sketchup and used ADE to compile the airport. All you should have to do is unzip it and place it with your other add-on scenery and activate it in P3D. This is for P3D V2 only at the moment. When I get a chance I'll get an FSX version done if anyone wants it.

Brennand Airport (79C) located about 4 miles southwest of Neenah WI. This airport is between KATW and KOSH. Brennand has had new ownership since 2013 and they have made many improvements in that time to 79C. So I went out there and took lots of pictures to create what I have for us now. They have built a new building and hangar which I have added along with all the other building on the airport grounds. The runway has been widened from 20 feet to 30 feet and they added PAPI lights on both runways 18 and 36 all of which I have included. I have changed the grass parking areas to reflect the way they are currently set up. (For fun parking area 8 is in the EAA Chapter 41 hangar (Hangar 11) with the door open so you can taxi out of the hangar. Now just need to figure out how to animate the hangar door).

Compatible with P3D v2 ONLY. FSX version may follow later.