Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - AFCAD Files | |
| Dave's Aerodrome Airport (7NJ9), NJ |
|
File Description:
Located 01 miles SW of Cedarville, New Jersey on 43 acres of land, Dave's Aerodrome Airport is a private turf field 2000' with a 600' displaced threshold on Runway 12. Each runway has a clear 20:1 approach slope, but in the case of Runway 12 be sure to aim for a landing past the hangar! There are power lines running along the road at the runway threshold that are not just there for decoration - come in too low and FSX will register a crash. In real life they have red balls on them - unfortunately I have no way of adding those in the sim at this time. So be on the lookout while on approach. Also take note that it is a right pattern for Runway 12 and a left pattern for Runway 30. The windsock is located next to the hangar and is not lit. There are no lights at this airport so daytime VFR operations only are suggested. No services are offered for transient aircraft. There is no hard-surfaced runway, you will be landing on bare terrain so set your mesh complexity slider as high as it will go for the best effect.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Daves_Aerodrome_Airport_7NJ9_NJ.zip |
| License: | Freeware |
| Added: | 16th February 2011, 15:36:42 |
| Downloads: | 211 |
| Author: | Drew Sikora |
| Size: | 1.02 MB |
| Category: Flight Simulator X - AFCAD Files | |
| FSX North Korea DMZ, UGF and Ballistic Missile Base Addon Scenery Package |
|
Images related to this file:
File Description:
I titled this a "DMZ, UGF and Ballistic Missile Base" scenery package because that's how this whole project started, but then it SNOWBALLED onto 80+ scenery areas for ALL of North Korea!
This package includes scenery AFCADs for 2 DMZ "Border Wall Areas", 8 DMZ SAM/EW radar sites (TacPack users can "spawn" SA-2s there!), 5 "secret" ballistic missile bases, two "secret" UnderGround Facility (UGF) locations like "TOPGUN 2", 5 navy bases/dockyards along the east coast, 2 nuclear facilities, 2 machine factories, and an Oil Refinery.
BUT WAIT! For the city of Pyongyang I added the Pyongyang Thermal Power Plant, the Pyongyang-Dong Power Plant, 2 power grid "sub stations" with SA-6 SAM sites, the Pyongyang rail yard, and the "VIP Airport" on the SE side of the city.
THERES MORE! (somebody STOP me!) I also did 23 fighter bases along with 12 helicopter bases (grass strips), and ALL of the fighter & helicopter bases have active runways, taxiways, and plenty of "Mil_Combat" parking available for AI aircraft.
For those who like "Carrier Ops", I put 4 "Naval Waypoints" off the coast of N Korea...2 in the Yellow Sea and 2 in the Sea of Japan. ALL FOUR have static aircraft carriers at their locations, or you can spawn/start an AI Carrier there instead!
Installation is SUPER easy and I've included instructions to install this SUPER-SIZED package as a stand-alone "Scenery Area" in your FSX Scenery Library. That way you can just click it on or off as needed, instead of clogging up your "Addon Scenery/Scenery" file with 200+ AFCAD files!
| Filename: | FSX_North_Korea_DMZ_UGF_and_Ballistic_Missile_Base.zip |
| License: | Freeware |
| Added: | 14th March 2024, 00:59:31 |
| Downloads: | 151 |
| Author: | Daniel Gregory |
| Size: | 22.5 MB |
| Category: Flight Simulator 2004 - AI Aircraft | |
| Chance-Vought F-8 Crusader (Part 4) |
|
Images related to this file:
File Description:
Chance-Vought F-8 Crusader (Part 4). I present a comprehensive AI traffic model package for this classic aircraft of modern military history.
This is an original 8-LOD model, with many animations and features thanks to a growing confidence in XML-coding and making FSDS work for me instead of the other way around.
Nicknamed "The Last Gunfighter", this aircraft was the last production aircraft for the US Navy and Marine Corps which used guns as primary armament, and was in service at the twilight of this age, as well as the dawn of the missile age. Like all combat-experience aircraft, it had a relatively short life during its operational use (only about twenty years or so as a fighter), but was used a little longer as a recce aircraft; and beyond that in export service to France and the Philippines. The Crusader was used extensively in combat operations in Vietnam, played a crucial role in the Cuban Missile Crisis, and gave the newer F-4 Phantoms a fair run for their money in terms of air combat capability during this time. It is interesting to note that the 'elderly' F-8 Crusader had a better kill overall ratio in air combat in Vietnam than its F-4 successor.
This is the fourth and final part of this model series, covering the export French F-8E(FN) and Philippine F-8P base models; with a total of 20 model options and 77 paints. Additionally, with this release I am including a universal PSD paint kit which will serve all variants. Base model and paint by Michael Pearson, flight dynamics by Michael McIntyre.
| Filename: | ChanceVought_F8_Crusader_Part_4.zip |
| License: | Freeware |
| Added: | 14th January 2013, 16:01:07 |
| Downloads: | 830 |
| Author: | Michael Pearson |
| Size: | 24.74 MB |
| Category: Flight Simulator X - Original Aircraft | |
| UFO - A51 |
|
Images related to this file:
File Description:
You can fly this UFO model in all directions e.g. vertical up/down lateral right/left, forward/backward, and can stay in a static position on any altitude level. The UFO provides a maximum speed of Mach 4.3 on all altitude levels and the altitude level is unlimited.
The overall radius of the model is 170 feet. The overall height is 100 feet. Be aware of this size if you are landing on standard airports. The model includes a animated gear system which is a big gray ring. The red disk on the outside of the model is the rotating UFO engine. In addition the model contains 3 guns which are moving out of the body if they are armed by activating a switch on the weapon control control panel. Important to say, the UFO is not a traditional aircraft. It reacts different and you need to handle it differently too! For more information and how to fly the model, read the documentation carefully and read the documentation first, before you go to fly it !!!!
The model and the gauges have been developed for FSX Flight Simulator SP2 or SP1. It has also been tested with Microsoft Acceleration but compatibility is not guaranteed by the author. The format for the panel and gauges is developed for a 4/3 monitor. Use the Wide Screen Panel.cfg if you have a 16/9 Monitor. For installation instructions see the documentation inside the zip file.
Credit goes out to: Bob Familton and Geoffrey Bogeaus for improvement, recommendations, testing and review, and to Doug Dawson for his XML IPC interface.
Enjoy a new way to fly.
Dietmar Loleit
| Filename: | UFO__A51.zip |
| License: | Freeware, limited distribution |
| Added: | 21st January 2014, 15:43:13 |
| Downloads: | 724 |
| Author: | Dietmar Loleit |
| Size: | 19.67 MB |
| Category: Prepar3D V1-4 - Aircraft Repaints, Textures and Modifications | |
| North American P-51D 52nd FG (WD-M) 'Pendaja / Miss Ruth' |
|
Images related to this file:
File Description:
This folder contains a repaint for the A2A WoP3 P-51D Mustang (with AccuSim), in the colors of P-51D-5-NA 44-13287 WD-M, which was the aircraft assigned to Lt William Parent of the 4th FS/ 52nd FG, based in Italy. On the 1st of September 1944 however, it was being flown by Major Wyatt P. Exum during an escort mission to Hungary. It was Maj. Exum's first operational mission nin the ETO. On the way back from the mission, the squadron strafed an airfield, before spotting a moving train. Lts Strout and Wilson attacked the train, and as a result of Lt Wilson's attack, the engine blew up while he was overflying it, damaging his cooling system and setting the engine on fire. The fire quickly blew out, and Lt Wilson decided to make an belly landing in a recently plowed field. Over the radio, he heard Maj Wyatt Exum transmit "I'll be down to get you, Charlie!" and indeed he landed close to Lt Wilson's aircraft. Lt Wilson managed to turn Maj Exum's aircraft, as his tail wheel had become stuck in a rut in the field, and both men tried to squeeze into the cockpit. Meanwhile, men on horseback were approaching, shooting several holes in the aircraft. While Lt Wilson shot back with his .45, Major Exum gunned the engine, and they managed to take off with Lt Wilson half outside the cockpit with his .45. They flew the 400 miles back to Madna in Italy on their last fuel, and landed with other Mustangs landing from the other side. Major Exum received the Silver Star for this action, as well as from the undying gratitude and admiration from Lt Wilson Repaint by Jan Kees Blom, based on the A2A paintkit.
| Filename: | North_American_P51D_52nd_FG_WDM_Pendaja__Miss_Ruth.zip |
| License: | Freeware |
| Added: | 4th November 2018, 17:24:47 |
| Downloads: | 65 |
| Author: | Jan Kees Blom |
| Size: | 11.83 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Frozen Canadian & USA Rivers & Lakes Revision |
|
Images related to this file:
File Description:
This "freezes" all lakes and rivers for winter flying and means they can be landed on with skis or wheels; it is meant for low level flying rather than high level jet flights. This edition is complete in itself and now really covers all of Canada and parts of the USA along the border, including large parts of Michigan, Wisconsin, Minnesota, North Dakota, and Montana. It is reversible with an "untick" in the FS scenery library. The revision is the addition of frozen sea in the area of Baffin Island (where I and Sid & Pete have recently posted all of the Baffin Island airfields) as I missed this area last time. Sorry about that. I have spent some time making sure that the sea and the inlets along the coast in the south do not get frozen too, and also some of the lakes that are close to the coast and rarely get cold enough to freeze over. The Great Lakes do not usually totally freeze, but this is an either ON or OFF modification and partial freezing cannot be convincingly simulated, so I went for total ice. Along the north shore I went for the peak of the winter with sea ice all the way to the permanent polar cap; this is not totally realistic as there is usually a partially open lead along the coast, but as with the Great Lakes...... It will work without Ultimate Terrain, but as UT is what gets all the lakes and rivers there and in the right place (except in the far north) it is obviously much improved with UT. The pics show Rockcliffe in the winter with the frozen Ottawa River for real and in FS for comparison; without UT the river would not be in the right place.
| Filename: | Frozen_Canadian__USA_Rivers__Lakes_Revision.zip |
| License: | Freeware, limited distribution |
| Added: | 6th September 2011, 00:42:43 |
| Downloads: | 622 |
| Author: | Roger Wensley |
| Size: | 1.2 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Peters Airport (4NJ8), NJ v1.1 |
|
File Description:
Located 05 miles W of Somerville, New Jersey on 70 acres of land, Peters Airport is a private turf strip that will test your short field skills to the max. The published runway dimensions for this strip are 1700x200 feet, and for the most case this is fairly accurate - however at the ends of both runways you have tree obstacles to overcome so this can shorten the amount of usable runway significantly, although the tree obstacles are no higher than 12-14m. There is no hardened runway surface so you will be landing/taking off on terrain. Depending on how high your mesh resolution is, this can be a significant factor, as Runway 31 is mainly uphill enough that you will need to power up with parking brakes on if you want to make it in the air. Runway 13 is the best since you are going downhill and the trees at the end are fewer and smaller. Pay close attention to the pattern! Runway 13 is Left and Runway 31 is Right - this airport is within 2 miles of Solberg-Hunterdon (N51) and you don't want to get in the way of that field's traffic! The runway is not lit, so daytime VFR operations only. There are no services at this strip for transient aircraft.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Peters_Airport_4NJ8_NJ_v11.zip |
| License: | Freeware |
| Added: | 20th September 2011, 14:08:43 |
| Downloads: | 405 |
| Author: | Drew Sikora |
| Size: | 461.03 KB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| KNILM Douglas DC-3 |
|
Images related to this file:
File Description:
Re-upload. FS2004 KNILM Douglas DC-3. Before and after World War II KLM was a major European operator of the Douglas DC-3. The first DC-3 entered service with KLM in October 1936. This made KLM the first operator of the DC-3 in Europe. 22 others would join before Nazi-Germany invaded the Netherlands on 10 May 1940 and occupied the country for five dark years. The KLM DC-3's served destinations in Europe as well as the famous 'Indies-route' from Amsterdam to Batavia (Dutch East Indies; nowadays Jakarta, Indonesia). Those DC-3's present at Amsterdam-Schiphol, if not destroyed by bombs, were impounded by the Germans. Other DC-3's that happened to be
elsewhere out of reach of the enemy found their way either to the Dutch East Indies where they served on the KNILM routes to various destinations in Far East Asia and Australia until the Japanese invasion in February 1942, or to England where they were leased by BOAC for the London (later Bristol) to Lisbon service. PH-ALP 'Pelikaan' ('Pelican') ended up in the Dutch East Indies, was bought by KNILM (Royal Netherlands Indies Airways) as PK-AFV. On her last flight on 3 March 1942 from Batavia to Broome, Australia, Japanese Zero fighters shot at PK-AFV and set her alight. The aircraft succesfully crash-landed on the beach at Carnon Bay, Australia. The repaint of PK-AFV is based on the templates Mark Beaumont created for the MAAM-SIM Douglas DC-3 (passenger version), which were based on Jan Visser's original textures. These are textures only. You will require MAAM-SIM's great donationware Douglas R4D/DC-3 package. Repaints by Maarten Brouwer.
| Filename: | KNILM_Douglas_DC3.zip |
| License: | Freeware, limited distribution |
| Added: | 12th June 2010, 01:18:01 |
| Downloads: | 399 |
| Author: | Maarten Brouwer |
| Size: | 7.68 MB |
| Category: Flight Simulator 2002 - Original Aircraft | |
| Dreamfleet 737-400 Panel/Air and Ariane Gmax Visual Model Merge |
|
File Description:
Dreamfleet/Flight1 Panel and air file merged With Gmax Ariane 737-400 Aeroflot visual model in FS2002. NOTE: users may have both Dreamfleet and Ariane products to run my merge beacuse I don't send any *.bmp, *.mdl or *.air but only a rewritten aircraft.cfg and the instrctions! This merge of the excellent Dreamfleet/Flight1 panel and the Ariane Gmax Aeroflot 737-400 is a combination of adjustments made by me, Mirko Masiero, on previus work of Jason Barlow and Lou Betti. Do not bother Dreamfleet/Flight1 or Ariane with any problems due to this merge. They will not support it in any way. I may support it a bit as I find time, but you're basically on your own. I'm just contributing this to the community. If and when Dreamfleet/Flight1 release a Gmax visual model, I will cease to use this. The flight model should be exactly the same as the Dreamfleet/Flight1 737-400. This merge uses the Dreamfleet/Flight1 air file and most of the aircraft.cfg too. The station loads in the weighting section come right out of an aircraft.cfg edited by the Load Manager, so you could copy in your own station loads if you desire. Known problems: For some reason regard Flight One 737 air file and Ariane model interactions,the ailerons do not work VISUALLY (only!) even though they work on Ariane 737-400. I do not believe there is anything I can do about this. The virtual cockpit, I Think due to a particolar Ariane model design, is not usable, but this is a minor issue... Enjoy! Mirko Masiero Mirko Masiero - [email protected] Avio Club Virtuale Padova - http://www.acvpadova.net PPL F.I.V.S. - http://www.fivs.it VirtualAlitalia Pilot 1546 - http://www.virtualitalia.it
| Filename: | Dreamfleet_737400_PanelAir_and_Ariane_Gmax_Visual_.zip |
| License: | Freeware |
| Added: | 4th October 2002, 14:14:29 |
| Downloads: | 1,665 |
| Author: | Mirko Masiero |
| Size: | 13.55 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Toronto Downtown Airport CYTZ Ontario, Canada |
|
Images related to this file:
File Description:
CYTZ is on an island in Lake Ontario and immediately adjacent to downtown Toronto. This updates the version made by Flight Ontario as there have been major changes since Porter Airlines purchased the airport. The obvious and main new item is the terminal, made with photo textures and with ten gates sized to accomodate the Dash 8-400 they currently use. The terminal has a passenger entrance and a vehicle setdown point as part of the link to the ferry terminal that wraps around the west side of the original and preserved terminal building. The ferry terminal is included here, along with a ferry. Also new are the car parking, road routing, gate and taxi markings, taxiways, taxiway signage, taxiway lighting, runway lighting, aprons, apron lighting (from Sid Schwartz and you will need to install his "lights_ss_v2"), fences, fuel tanks, tanker trucks, access roads to navigation equipment, ai parking, static parked planes, parked cars, apron equipment, and the useable floatplane ramp. The AI includes Porter, Jazz, several GA aircraft, and a helicopter. Only 3 of these require downloads. The Lake Ontario AI includes three large ships, typical of the traffic to be seen on all the Great Lakes. CYTZ has three runways and there is an airport diagram included. 08-26 has ILS and is the only runway actually long enough to be used by Porter; FS9 atc will ignore this. There is fuel available and it is dispensed from a truck. The longer projection from the front of the terminal building is a covered ramp that leads up from the terminal basement level, used by towed luggage trolleys. The gates are not powered in any way except for the weather cover that protects passengers as they cross the small area of asphalt between plane and gate. I did not try to reproduce this in FS9.
| Filename: | Toronto_Downtown_Airport_CYTZ_Ontario_Canada.zip |
| License: | Freeware, limited distribution |
| Added: | 23rd October 2012, 12:52:14 |
| Downloads: | 1,806 |
| Author: | Roger Wensley + Flight Ontario |
| Size: | 12.43 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |