Category: Flight Simulator 2004 - AFCAD Files
Welke Airport, Beaver Island, MI (6Y8)

File Description:
This is an update to the stock airport at Welke. Runway 9/27 has been changed to reflect it being made of asphalt/concrete. I also added a mini apron at the end of runway 9/27 to reflect the turnaround spot being as there are no taxiways. This is my 1st upload and 1st edit of a stock airport. Any tips or help would for the future would be greatly appreciated.

Filename:	Welke_Airport_Beaver_Island_MI_6Y8.zip
License:	Freeware
Added:	8th August 2010, 14:40:54
Downloads:	84
Author:	Todd Ray
Size:	2.27 KB

Category: Flight Simulator X - AFCAD Files
Central Jersey Regional Airport (47N), NJ

File Description:
Located 01 miles S of Manville, New Jersey on 119 acres of land, Central Jersey Regional Airport is a public asphalt strip. Hangars and tiedowns are offered for transient craft. The open hangar at the north of the airport is available for parking - it can be a bit of a tight fit taxiing in so I have disabled collision with the two planes nearby. You can also select the DOCK parking space to start inside the hangar. Fuel is available on the north tarmac by the fuel truck in front of the hangar, and on the south tarmac by the fuel tank. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Central_Jersey_Regional_Airport_47N_NJ.zip
License:	Freeware
Added:	25th November 2010, 14:15:25
Downloads:	295
Author:	Drew Sikora
Size:	1.92 MB

Category: Flight Simulator X - AFCAD Files
Thomas Browne Airpark Airport (61NJ), NJ

File Description:
Located 02 miles W of Glassboro, New Jersey, Thomas Browne Airpark Airport is a private turf strip 2000��80 feet. There is no hard-surfaced runway, which means you will be landing on terrain so it is recommended you set your mesh resolution as high as possible. Watch out for trees and buildings alongside and at opposite ends of the runway. Crop fields are planted to the south of the runway and border the runway. You won't crash if you run into them but it certainly won't put you in good favor with the field owners! Take caution to avoid the transmission line towers as they are not lit at night! Neither is the runway, for that matter, so daytime VFR operations only are recommended for this airfield. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Thomas_Browne_Airpark_Airport_61NJ_NJ.zip
License:	Freeware
Added:	4th February 2011, 02:47:24
Downloads:	166
Author:	Drew Sikora
Size:	1.41 MB

Category: Flight Simulator X - AFCAD Files
Stoe Creek Farm Airport (7NJ2), NJ

File Description:
Located 01 miles S of Canton, New Jersey, Stoe Creek Farm is a private turf field 1725' in length. The runway is largely clear of obstructions although on approach for Runway 05 you will deal with 20-30' trees a few hundred feet back from the threshold and there are transmission towers along the approach corridor to Runway 23 you should watch out for. The runway does have edge lighting, although the windsock is not lit at night and daytime VFR is still recommended. There are no services for transient craft at this airfield. Since you will be landing on terrain, it is recommended that your mesh complexity is set as high as possible. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Stoe_Creek_Farm_Airport_7NJ2_NJ.zip
License:	Freeware
Added:	14th February 2011, 18:32:24
Downloads:	163
Author:	Drew Sikora
Size:	700.91 KB

Category: Flight Simulator 2004 - Scenery
Old Lima, Ohio Municipal Airport (KLIA)

Images related to this file:

• Old_Lima_Ohio_Municipal_Airport_KLIA_1.jpg

File Description:
Opened; 1933. Closed; 1980. Built in 1933, it first consisted of 3 sod runways, with a single hangar located in the Northwest corner. It later (around 1960) sported a single paved east-west runway (9/27, 3,500 ft) and two sod strips, with one running parallel to the North of the paved runway. In addition, it had a small office/terminal, a main service hangar, and 3 long T-hangars. It's "golden years" were from 1953-63, when Lake Central Airlines ran DC-3 service connecting Lima to Columbus, Cincinnati, and Pittsburgh. To view the entire scenery, you'll need two Sidney Schwartz libraries - details in readme.

Filename:	Old_Lima_Ohio_Municipal_Airport_KLIA.zip
License:	Freeware
Added:	19th February 2011, 15:55:16
Downloads:	95
Author:	Stephen Plumb
Size:	5.9 KB

Category: Flight Simulator X - AFCAD Files
Bridgeport-Cahill Field Airport (6NJ9), NJ

File Description:
Located 01 miles SW of Bridgeport, New Jersey on 167 acres of land, this airport is non-existent in real life, as far as I am able to determine. although it is still listed as Active, no visible trace of anything remotely suitable for a landing strip is visible anywhere in this area. The strip mining operation nearby in some satellite/aerial photos shows a long narrow grass strip that could be used as a runway, but then others show it stripped down to bare dirt as part of the apparent mining operation, and the MegaSceneryEarth textures depict this latter representation as well. So I have simply removed visible evidence of this strip, although FSX will still try to tell you it's there in the airport directory. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	BridgeportCahill_Field_Airport_6NJ9_NJ.zip
License:	Freeware
Added:	10th February 2011, 05:01:38
Downloads:	197
Author:	Drew Sikora
Size:	209.8 KB

Category: Flight Simulator X - Scenery
KBVY - Beverly Municipal Airport - Beverly, MA

File Description:
Here is an improved version of the stock Beverly Municipal Airport. I adjusted and added aprons,roads and taxiways to more closely match real life. I replaced most default buildings and added additional buildings. I added the parking lots and static vehicles, aircraft, lightpoles, and other filler objects. I moved a radio tower that was in the middle of a UTX road. Beverly Municipal is a "reliever" airport for Logan International.

Filename:	KBVY__Beverly_Municipal_Airport__Beverly_MA.zip
License:	Freeware
Added:	18th January 2009, 12:39:19
Downloads:	832
Author:	Jim Cook
Size:	11.05 KB

Category: Flight Simulator 2004 - AFCAD Files
Jacksonville International Airport (KJAX) Updated 2009

File Description:
This is THE LATEST update of KJAX as of January 2009. It features new taxiways, frequency allocations, a MAJOR apron update from KJAX's new terminal. Due to the limitations of FS9's scenery, I was unable to edit the terminal, but all new parking spots and their allocated airlines are added along with proper parking spots. Many more upgrades, be sure to read the README included. Based on requests from VATSIM's ZJX ARTCC. Enjoy!

Filename:	Jacksonville_International_Airport_KJAX_Updated_20.zip
License:	Freeware
Added:	20th January 2009, 13:40:12
Downloads:	686
Author:	Alex Melia
Size:	111.73 KB

Category: Flight Simulator 2004 - Scenery
Airport Central Ciudad Real. LERL ¡¡Update!!

File Description:
I have added more objects to scenery and i have added much more AI traffic too. IMPORTANT: You must have installed the previous scenery: "lerl.zip" of 14th January 2009.

Filename:	Airport_Central_Ciudad_Real_LERL__Update.zip
License:	Freeware
Added:	20th January 2009, 22:22:18
Downloads:	947
Author:	Jose Ramos Ruiz
Size:	47.32 MB

Category: Flight Simulator X - Scenery
KLCI - Laconia Municipal Airport - Laconia, NH

File Description:
Here is an improved version of the stock Laconia Municipal Airport. This airport had a lot of issues with buildings on roads or in the water, boundary fences in the water, etc. I fixed those issues and adjusted and added aprons,roads and taxiways to more closely match reality. I replaced most default buildings and added additional buildings. I added the parking lot and static vehicles, aircraft, light poles, and other filler objects. The runway at Laconia was lengthened in real life and I corrected the length in FSX. It was lengthened primarily to accomodate biz jets of race teams and others attending the NASCAR events at nearby Loudon, NH. Laconia Airport is located on scenic Lake Winnipesaukee and not far from Weirs Beach. Laconia hosts a week-long motorcycle rally each June, usually a week after the Americade Rally in Lake George, NY.

Filename:	KLCI__Laconia_Municipal_Airport__Laconia_NH.zip
License:	Freeware
Added:	22nd January 2009, 03:28:31
Downloads:	764
Author:	Jim Cook
Size:	10.18 KB