Where Flight Simulation Enthusiasts Gather from Around the World!

AVSIM Library - Search Results

Searching for: 'Real Forest Environment ' in AVSIM File Library and below.
Return to Library Index
Found 8,726 files (873 pages)

Category: Flight Simulator X - AFCAD Files
Ocean City Municipal Airport (26N), NJ Download

File Description:
Located 02 miles SW of Ocean City, New Jersey on 60 acres of land, Ocean City Municipal Airport is host to quite a few GA aircraft, and has plenty of room for anyone looking to fly in for a few days. Around 60 tiedown spots are available on the tarmac. The main tarmac can host planes with wingspans up to 40 feet. If you managed to fly in anything larger than that head for the west end of the field to tie down. FSX may spawn some AI craft in that area but it is not attached to the main taxi network so no planes will leave from there - the majority of planes FSX spawns in that larger spot can't handle the runway length! Be sure to check your aircraft can handle takeoffs without freezing temps and a ton of headwind before you fly in. You can gas up by stopping near the fuel truck by the terminal or by the gas tank at the west end of the tarmac. Don't ask me what that yellow circle is on the tarmac - if anyone knows you can tell *me* :P It's in the airport photos so its there. Runway touchdown markings are enabled as in real life, but apparently FSX decides not to draw them because the runway is too thin.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.


Filename: Ocean_City_Municipal_Airport_26N_NJ.zip
License: Freeware
Added: 10th October 2010, 13:25:12
Downloads: 320
Author: Drew Sikora
Size: 443.39 KB


Category: Flight Simulator X - AFCAD Files
Linden Airport (KLDJ), NJ v1.1 Download

File Description:
Located 01 miles SE of Linden, New Jersey on 188 acres of land, Linden Airport is a public asphalt strip 4137' in length. Numerous changes have been made to this airport to bring it closer to its real-life counterpart including proper non-precision runway markings for R09 while only basic markings are used for R27; The 4-box VASI has been accurately located; the traffic pattern height has been adjusted; All 130 tiedown locations have been accurately placed. RAMP_GA spots are taken by static aircraft (all of which have collision disabled) so they should not be selected unless you want to start inside another aircraft! RAMP_GA_SMALL spots can be occupied by aircraft with wingspans up to 40 feet and RAMP_GA_MEDIUM spots can be occupied by aircraft with wingspans up to 60 feet. There are 4 open hangars labeled as GA_DOCK. The main hangar (NW Parking) can hold aircraft with wingspans up to 60 feet. The three smaller hangars (SW Parking) can hold aircraft with wingspans up to 35 feet. The W Helipad start location will put you in front of the smaller main tarmac hangar within the coned-off section. Fuel is only available by taxiing to a stop in front of either fuel tank to the west of the main tarmac. No AI aircraft will spawn in the SW Parking area. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.


Filename: Linden_Airport_KLDJ_NJ_v11.zip
License: Freeware
Added: 28th June 2011, 00:03:41
Downloads: 511
Author: Drew Sikora
Size: 1.23 MB


Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications
FSX/P3D Seaboard World 707-345C 1968 Download

Images related to this file:

File Description:
This is a repaint of the 707-345C in Seaboard World 1968 colors. The payware Captain Sim 707-300C is needed for this repaint. New York based, Seaboard & Western Airlines - an all cargo airline, was renamed Seaboard World Airlines on 26 April 1961. The "new" airline received the first of 6 CL-44 turboprops in August 1961. The CL-44 was the first modern airliner designed solely to carry freight. They were put into service after August 1961. By 1962, the Lockheed Constellations were all replaced, and Seaboard became an all-turbine-powered airline (with the exception of a solitary C-46 based in Europe). Two years later in 1964, Seaboard received their first pure jets in three DC-8-Fs. 1964 was the airline's best year ever, as profits jumped by 53%, and the future looked very bright. However, it was not to be. Seaboard was forced to compete over its routes with the freight capacity of the passenger airlines, which annually became more competent in the cargo field. Although they did have a bright spot in providing charters to the military, the air freight industry as a whole will eventually fail to achieve the traffic potential envisioned by "aviation experts". Nevertheless, Seaboard, with new jetliners at their disposal, went on and provided excellent service to its customers. They offered a wide range of cargo services to many points in Europe. Eventually, falling passenger charters and stiff competition took their toll. Seaboard was bought out in 1980 by the only real all-cargo success at the time - The Flying Tiger Line. Seaboard operated 2n 707-300Cs from 1968 to 1969. This aircraft, N7322S, was leased from VARIG in 1968. This repaint was tested on FSX-SE. It should work on FSX & P3D v1-3. Textures are DXT5 dds.


Filename: FSXP3D_Seaboard_World_707345C_1968.zip
License: Freeware
Added: 14th February 2019, 18:21:31
Downloads: 105
Author: Ted Giana
Size: 3.97 MB


Category: Flight Simulator 2004 - Scenery
MNPC Puerto Cabezas, Nicaragua Download

Images related to this file:

File Description:
Googly scenery for MNPC Puerto Cabezas - a small international airport in Nicaragua for which no facilities are provided in Microsoft Flight Simulator 2004. These scenery files create the airport and add taxiways, aprons, buildings and other airport features, so that you and your "AI" traffic can land, taxi, park and take off in a realistic manner.

The airport, with its new Rigoberto Cabezas terminal opened in 2000, serves the city of Puerto Cabezas and is surrounded by beautiful beaches and lush scenery. Unfortunately, the country of Nicaragua has been embroiled in civil unrest almost continuously since it became an independent republic in 1838, most of which is funded and fuelled by other countries seeking to interfere with Nicaragua's politics. For this reason, the country has no national airline or international flights of its own - the major powers refuse to accept its currency - and commercial traffic is confined to local flights operated by small craft from adjoining countries like those of Atlantic Airlines de Honduras and TACA Regional.
Fortunately, in Flight Simulator you do not need to worry about world politics and you will be assured of a "virtual" welcome when you call in here. Please say a small prayer for world peace when you do.

The scenery does not purport to be ultra-accurate. Based on high-detail satellite imagery from Google Earth, the layout is proportionally correct but the added airport features, such as buildings, are built from default Microsoft objects and add-on libraries so will not look exactly like the real thing.

You are not obliged to download and install any additional scenery libraries, but to enjoy this scenery in its entirety, you may wish to. It will work fine, with or without. [File re-uploaded at request of AVSIM]


Filename: MNPC_Puerto_Cabezas_Nicaragua.zip
License: Freeware
Added: 28th May 2010, 20:36:10
Downloads: 1,149
Author: John Hinson
Size: 67.63 KB


Category: Flight Simulator X - AFCAD Files
MHRO - Juan Manuel Galvez International Airport / Roatan, Honduras (version 1.1) Download

Images related to this file:

File Description:
MHRO - Juan Manuel Galvez International Airport / Roatan, Honduras (version 1.1) This airport update was made with the latest version of ADE (Airport Design Editor) and made for FSX as a replacement for the stock (default) airport. I found that most stock airports in FSX lack a decent amount of character and realism and this area in particular was dreadful! The stock airport file for Roatan was completely devoid of any life. There were absolutely no parking spots for commercial aircraft and no terminal buildings; the nearby areas of Colonia/Loma Linda were completely barren. I've done major reworking to this airport and added the small terminal building as well as renumbered the runway to the correct designation and length. The nearby town has been rendered complete with a variety of vessels small and large in the ocean. I hope you enjoy. Below is a list of changes/additions. All these enchancements are as close to the real airport as I can get with stock library objects. I've used satellite images, terminal photos and maps throughout the whole process so building locations are as accurate as possible. Happy landings in Honduras! Features: *Expanded parking apron *Terminal building with parking for commercial traffic (Delta and United fly to Roatan from the US with regular service) *Renumbered runways to correct designations and modified runway length and lighting accurately *Nearby neighborhoods modeled complete with marinas and cruise ship port (cruise ship parked at the pier visible on approach) *Diving, fishing, cargo and recreational vessels visible in the ocean surrounding the airport v1.1 *Several hotels dotting the area near the airport as well as West End/Gibson Bight *Roads with static vehicles near the airport *Corrected taxiway signs v1.1


Filename: MHRO__Juan_Manuel_Galvez_International_Airport__Ro.zip
License: Freeware
Added: 15th July 2012, 06:47:04
Downloads: 686
Author: Jaison Diaz
Size: 6.85 KB


Category: Flight Simulator X - Scenery
Ireland VFR Small Airports Part 3 Download

Images related to this file:

File Description:
Ireland VFR Small Airports Part 3. This scenery consists of 1. EIKY Kerry International Airport, 2. EIBN Bantry Airfield, 3. EIBR Birr Airfield, and 4. Clonbullogue Airfield. Kerry is situated in the South West of Ireland and serves as a gateway to the world famous Lakes of Killarney, The Ring of Kerry and the Dingle Peninsula. Bantry is ideal for visiting the rugged beauty of West Cork. Clonbullogue is home to the Irish Parachute Club and is situated approximately 30 miles southwest of EIDW Dublin. Birr is almost in the centre of Ireland and is home to a very active group of GA aviators. The scenery has been created almost entirely from real photographs and all objects have been placed accurately using ordinance survey data and satellite imagery. It also includes animated marshallers, aircrew and passengers together with animated animals and vehicles. Appropriate sound effects have been added to each file together with smoke and strobe lighting. Full night lighting is included, with flood and wash lighting of the aprons and carparks. Each airport has been sub-divided into seperate elements, which can be switched on or off according to the users preference and hardware setup. It caters for GA enthuasiasts and for those who prefer to fly the heavies. This scenery has not been designed as a standalone, it calls on many objects from my Ireland VFR Small Airports parts 1 and 2. It has also been designed to complement photographic scenery but will also work with the default terrain and I have inlcuded a set of landclass and photoreal textures. It also includes an extended set of photoscenery treescapes. Full installation instructions, settings, credits and tips can be found in the README file. Please enjoy and I hope you like my airports as much as I enjoyed making them.


Filename: Ireland_VFR_Small_Airports_Part_3.zip
License: Freeware, limited distribution
Added: 8th April 2012, 22:40:52
Downloads: 3,747
Author: George Keogh
Size: 81.33 MB


Category: Flight Simulator 2004 - AI Flight Plans
Philippine Airlines Full Version 1.0 Download

File Description:
This file is the most complete PHILIPPINE AIRLINES Artificial Intelligence (AI)Aircrafts Package to be released as Freeware.All models and repaints included in this file are the fleet of aircrafts currently used by Philippine Airlines.A total of 26 repaints are included. Airbus A320-200,Boeing B737-300 and Boeing B737-400 models are by Jon Murchison and ARNZ-AIS and repaints by Ver Walter Gulfan.Jon Murchison's models feature pushback vehicles for FS2004 and his excellent Animation-Integrated Scenery.Airbus A330-300 and Airbus A340-300 models are by FSPainters and repaints by John Makani and Ver Walter Gulfan.Boeing 747-400 models are by FSPainters and repaints by Ver Walter Gulfan.All 26 aircrafts included in this file have no duplicate registration numbers.They have a specific rego each just like the real counterpart. The registration numbers of all the repaints included in this file are the following:EI-BZE,EI-BZF,EI-BZJ,EI-BZL,EI-CUL,RP-C4007,RP-C3221,RP-C3223,RP-C3224,EI-CVN,EI-CVO,EI-CVP,F-OHZM,F-OHZN,F-OHZQ,F-OHZR,F-OHZS,F-OHZT,N751PR,N752PR,N753PR,N754PR,F-OHPJ,F-OHPK,F-OHPL and F-OHPM. No additional download file is required in this package.Models,aircraft.cfg,original airfiles,repaint textures and Traffic Tools v.201 Aircrafts and Flightplans files are all included here.Truly the most complete Philippine Airlines AI file you could ever get! Note:Original models,airfiles aircraft configs are all originally downloaded from www.avsim.com. I am uploading this addon file only to AVSIM and i'm not to any other website.Uploading to any website other than AVSIM is prohibited.All aircrafts included here have no panel and sound folders as this performs best for AI aircraft only and not for flying.Works best for FS2004 but this should also work with FS2002 but without the pushback vehicle feature.


Filename: Philippine_Airlines_Full_Version_10.zip
License: Freeware
Added: 14th November 2003, 00:06:55
Downloads: 5,201
Author: Ver Walter Gulfan,Jon Murchison,ARNZ,John Makani and FSPainters
Size: 8.98 MB


Category: Flight Simulator 2004 - Scenery
CPR5 - Woodstock - Ontario, Canada Download

Images related to this file:

File Description:
This is the first of a south Ontario series. Woodstock is a town with a population of around 38,000, located 50 miles west of Lake Ontario. The airfield is 3 miles west of the town, with a single grass runway just over 3,000 feet long and 100 plus feet wide, aligned 05/23 in FS9 (in fact it is now 06/24 due to the magnetic north wandering off during the last 10 years). There have been at different times varying amounts of gravel mixed in with the grass on both runway and taxiway; the majority surface by far is grass and I have left it all as such, as there is no visually convincing way to mix the two without unreal sharp edges. The apron is on the northern side of the runway, and is now modified in shape to maximise the area available for crops. There are 10 "T" hangars and a small clubhouse in a single long building. There is no fuel, runway lighting, or taxiway or apron lights so usage is effectively restricted to daylight hours. To the east of CPR5 and on the edge of the town is a private airstrip with 2,800 feet of asphalt runway; I have added this as a visual reference, along with several large grain silos on the other side of the road. Hidden in plain sight amid the surrounding farmland, the first sighting of CPR5 is actually always of the adjacent and far more visible buildings just to the east of the apron, which are owned by a company that deals with everything to do with boats, up to and including fishing gear. These have been included. As ditches cannot be effectively duplicated in FS9 I have included some fences which do not exist in real life, to give some needed visual clues.


Filename: CPR5__Woodstock__Ontario_Canada.zip
License: Freeware, limited distribution
Added: 8th July 2015, 13:36:05
Downloads: 186
Author: Roger Wensley
Size: 5.57 MB


Category: Flight Simulator 2004 - Scenery
Dallas Ft. Worth KDFW / DFW, version 3.2 Download

Images related to this file:

File Description:
Thank you for downloading this scenery. This is an extensive upgrade to the default Dallas/Ft. Worth International airport. The brand new Terminal D is added and in use now at DFW. FRF's rendition of this terminal is in no way photoreal or exact as it is in real life. The basic shape and dimensions are correct,but due to the limitations of the building blocks available to me at the time, We were not able to design the curved roof and some other architectural details of the actual building. The gates are generally accurate and I have seen no parking problems so far. The original main terminals remain with new, more accurate jetways. The overhead tramway which circles the entire terminal area has been added. It is not perfectly correct or photoreal, but it is a good basic representation.

An AFCAD is included with accurate parking per the DFW website and AA.com. There is a substantial frame rate hit with full AI traffic and weather enabled, but it is not a slideshow.

Update from v3:
The afcad file for KDFW is all new, made with AFX, and reflects recent updates to the taxiway layout. The new afcad file is no longer "all runways active" due to the incorrect behavior of AI aircraft overflying the main runways when using the 13/31's. The new end-around taxiway at the end of Rwys 17R/C is now in place. The runway 18R/17C extensions are reflected as well as associated new taxiways and signage. Parking changes are now reflected per the DFW website. Visual changes include the midfield hangar change from Delta to American titles, courtesy of Joe Degregorio.


Filename: Dallas_Ft_Worth_KDFW__DFW_version_32.zip
License: Freeware
Added: 30th May 2010, 10:39:01
Downloads: 23,458
Author: William Morgan, FRFSTUDIO.NET
Size: 10.12 MB


Category: Flight Simulator X - Scenery
Burke Lakefront Airport (KBKL), Clevland, Ohio Download

Images related to this file:

File Description:
File Description: This airport was made using Google sketch up 8, Airport Facilitator X and Instant Scenery 2. Burke Lakefront Airport is a general aviation airport located next to Lake Erie in Cleveland, Ohio. I have made custom 3D buildings using Google sketchup for the airport. This update makes it so that all the buildings will show because some people were having problems with the buildings. All the buildings have photo textures to make it closer to real life. The update also makes it so that the airport ICAO is not included in the airport name and an installer program is included. I put static aircraft on the ramp, airport vehicles and more fuel trucks. I added more parking and fuel spots. I also made a parking lot full of cars. If you choose to start off at a DOCK gate, you will start off inside one of the custom hangars. Starting off or taxiing inside of a hangar will cause a crash (unless you have crashes turned off). I added a helipad located near the FBO. I have also included the aviation high school, that is located at the northeast, and boats that are right next to it in the water. There will be more objects at the airport if your scenery complexity is set to normal (such as vehicles, aircraft, and fuel trucks). Tower view is from the roof of the control tower. This was all made based on Google Earth satellite imagery and Bing Maps. There are no night textures for the custom buildings. These will be added in a future version. Please read the readme for instructions on how to install. You do not need the original file for this update to work. This is for flight simulator X only. By Tyler Lawrence.


Filename: Burke_Lakefront_Airport_KBKL_Clevland_Ohio.zip
License: Freeware
Added: 7th April 2012, 11:42:42
Downloads: 1,347
Author: Tyler Lawrence
Size: 6.82 MB


Prev Page   Next Page
AVSIM Library System Version 3.00 -- 2025-Apr
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |