Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| SKHV North American T-6 Texan/Harvard Current Fleet (PH-LSK, PH-IIB, PH-MLM and PH-TBR) |
|
Images related to this file:
File Description:
This packet includes 4 repaints of the current harvard fleet of the SKHV/KluHV
(Koninklijke Luchtmacht Historische Vlucht aka Royal Netherlands Air Force
Historical Flight). Stationed at Gilze Rijen Airbase in the Netherlands.
Featuring the PH-IIB (B-118), PH-LSK (B-64) PH-MLM (B-71) and PH-TBR (B-182)
For more info on the RNLAF Historical Flight please pay a visit to there homepage:
https://kluhv.nl/home-eng/
First three are from the RNLAF Flight School (VVO, Voortgezette Vlieg Opleiding)
at Gilze Rijen Airbase. The last one is from the so called "BAFO Vlucht"
(Photo Flight) stationed at Deelen Airbase until 1967.
The repaints are both on the outside and inside (Virtual cockpit & pilots).
As much detail is added as possible, accurate decals/stencils, also the
bump-map was modified, some latches removed some other added, also modified
the baggage compartment to look more like a Harvard then the Texan one.
Both PH-IIB and PH-LSK are updated since their initial release.
To be used with the payware A2A Simulations T-6 TEXAN/HARVARD.
Buy it here: https://a2asimulations.com/
The A2A repaintkit was used for making this repaint.
| Filename: | SKHV_North_American_T6_TexanHarvard_Current_Fleet_.zip |
| License: | Freeware |
| Added: | 21st May 2016, 20:38:29 |
| Downloads: | 397 |
| Author: | Marcel Ritzema |
| Size: | 132.94 MB |
| Category: Flight Simulator 2004 - AI Aircraft | |
| B&H Airlines ATR 72-212 (E7-AAD and E7-AAE) for AI model by Oskari Syynimaa - update |
|
File Description:
Updated repaints for B&H Airlines ATR 72-212 (E7-AAD and E7-AAE) for use with the AI ATR model by Oskari Syynimaa, base package is available from AVSIM (osp_atr_72_210_base.zip). Both variations included (E7-AAD 'Sarajevo' and E7-AAE 'Mostar'). Changelog: New country code E7 instead of T9, repaint moved to the -210 model and also new windows config, various little changes and adjustments. Thanks for downloading and enjoy.
| Filename: | BH_Airlines_ATR_72212_E7AAD_and_E7AAE_for_AI_model.zip |
| License: | Freeware, limited distribution |
| Added: | 15th February 2009, 14:21:52 |
| Downloads: | 1,132 |
| Author: | Dieter Barthelmeus |
| Size: | 821.11 KB |
| Category: Prepar3D V1-4 - Scenery | |
| KLVN - Airlake Airport - Lakeville, MN, USA |
|
File Description:
KLVN - Airlake Airport beta version .4 - by Jason Boche
This is an update of the default P3Dv4.5 KLVN airport. Aside from the original 12/30 runway, everything else at this airport has been completely ripped and replaced.
Enhancements include:
-Extended runway on each end to depict current configuration
-Accurate taxiways including Hamburg Ave. and buildings representing the current general aviation hangars
-Added navigational equipment on the field
-Added a few asphault and dirt service roads
-Added FBO and other buildings as close as I could match them
-Added some general aviation aircraft, civilians, vehicles at the FBO and hangars, and two fuel trucks
-Moved fuel station to where I believe it is currently according to Google maps with 100LL fuel trigger functional
-Moved the windsock to accurate location
-Moved the beacon to accurate location
-Moved GA parking spots
-Added trees around FBO and beacon
-Added utility poles
-Added a few square miles of Lakeville city, farm, and residential land class and autogen according to Google maps. This is probably the biggest improvement. It now looks like people live, work, and shop north/northwest of KLVN.
-Reworked the runway 12/30 blast pads to what I believe is the "proper" method. Instead of freehand polygon asphault, they are now actual runway extensions on both ends with yellow chevron markings
-Reworked the land class on the southwest end of the airport where I believe hangar expansion is intended. Prior to this, there was a sharp contrast between where the KLVN airport boundary ended and where generic farm landclass began which was right in the middle of the southwest taxiways and it looked bad. Now that whole region is grass and looks to be part of the airport parcel.
-Minor building adjustments west of the FBO to better match actual placement.
-Fixed a gap on the southeast end of Hamburg ave taxiway where it rounds the corner for the rwy 30 hold short line
-Randomized the directional facing of some of the cars parked at GA hangars
-Renumbered the parking spots 1-4 with #5 being the refueling spot
-Reversed the start direction of parking spots 1-3.
-Pulled the refueling parking "start" spot back because on start the engine cowling & prop were too far forward inside the fuel pump equipment
-Added an autogen exclusion to the rwy 12 short final due to trees popping up on short final path.
-KLVN tower viewpoint 25 meters above FBO.
-Removed the perimeter fence around the entire field
| Filename: | KLVN__Airlake_Airport__Lakeville_MN_USA.zip |
| License: | Freeware |
| Added: | 13th May 2020, 17:18:40 |
| Downloads: | 84 |
| Author: | Jason Boche |
| Size: | 14.81 KB |
| Category: Flight Simulator X - AFCAD Files | |
| KLVN - Airlake Airport - Lakeville, MN, USA |
|
File Description:
KLVN - Airlake Airport beta version .3 - by Jason Boche
This is an update of the default FSX KLVN airport. Aside from the original 12/30 runway, everything else at this airport has been completely ripped and replaced.
Enhancements include:
-Extended runway on each end to depict current configuration
-Accurate taxiways including Hamburg Ave. and buildings representing the current general aviation hangars
-Added navigational equipment on the field
-Added a few asphault and dirt service roads
-Added FBO and other buildings as close as I could match them
-Added some general aviation aircraft, civilians, vehicles at the FBO and hangars, and two fuel trucks
-Moved fuel station to where I believe it is currently according to Google maps with 100LL fuel trigger functional
-Moved the windsock to accurate location
-Moved the beacon to accurate location
-Moved GA parking spots
-Added trees around FBO and beacon
-Added utility poles
-Added a few square miles of Lakeville city, farm, and residential land class and autogen according to Google maps. This is probably the biggest improvement. It now looks like people live, work, and shop north/northwest of KLVN.
-Reworked the runway 12/30 blast pads to what I believe is the "proper" method. Instead of freehand polygon asphault, they are now actual runway extensions on both ends with yellow chevron markings
-Reworked the land class on the southwest end of the airport where I believe hangar expansion is intended. Prior to this, there was a sharp contrast between where the KLVN airport boundary ended and where generic farm landclass began which was right in the middle of the southwest taxiways and it looked bad. Now that whole region is grass and looks to be part of the airport parcel.
-Minor building adjustments west of the FBO to better match actual placement. Will only be shown on high scenery detail.
-Fixed a gap on the southeast end of Hamburg ave taxiway where it rounds the corner for the rwy 30 hold short line
-Randomized the directional facing of some of the cars parked at GA hangars
-Renumbered the parking spots 1-4 with #5 being the refueling spot
-Reversed the start direction of parking spots 1-3.
-Pulled the refueling parking "start" spot back because on start the engine cowling & prop were too far forward inside the fuel pump equipment
-Added an autogen exclusion to the rwy 12 short final due to trees popping up on short final path.
-KLVN tower viewpoint 25 meters above FBO.
-Removed the perimeter fence around the entire field
| Filename: | KLVN__Airlake_Airport__Lakeville_MN_USA.zip |
| License: | Freeware |
| Added: | 22nd November 2013, 23:26:10 |
| Downloads: | 225 |
| Author: | Jason Boche |
| Size: | 446.33 KB |
| Category: Flight Simulator X - Scenery | |
| Murray river and SE Victoria v2 for ORBX v2. YRIO Robinvale YBRN Balranald YDLQ Deniliquin YLEG Leongatha YYRM Yarram |
|
Images related to this file:
File Description:
'Murray and SE Victoria v2' is made to match ORBX Australia v2 scenery. Use 'Murray + SE Victoria airports' for ORBX v1 or no ORBX. There are 5 airports. 3 airports near the Murray river in Victoria and NSW - YRIO Robinvale, YBRN Balranald, YDLQ Deniliquin. 2 airports in SE Victoria - YLEG Leongatha, YYRM Yarram. ORBX has done these as they have done every airport included with FSX in Australia to a reasonable standard. If I had not already done them for ORBX V1 I would not have bothered. However these are better than ORBX because the surroundings have been modified to match real life. Towns have been added or shifted. Forests cut down or added. Race courses, sewage treatment ponds and other stuff added. Local obstacles (towers etc) added. There are Included are 2 AI traffic files that cover the airports. These files are for Flight Simulator X. Made using Airport Design Editor using some objects borrowed from Robert Budd's excellent Baccus Marsh and 'Static aircrafts' by Jean-Pierre Fillion. REQUIRED The scenery is designed to interface with ORBX FTX_AU V2 scenery for Australia (payware).
| Filename: | Murray_river_and_SE_Victoria_v2_for_ORBX_v2_YRIO_R.zip |
| License: | Freeware |
| Added: | 15th December 2019, 19:06:10 |
| Downloads: | 315 |
| Author: | Colin Jeffery |
| Size: | 10.06 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Garuda Indonesia Boeing 777-300ER Livery (standard, Asian Games 2018, Republik Indonesia, Retro Livery (1969-1985) and Skyteam) MegaPack |
|
Images related to this file:
File Description:
Garuda Indonesia Boeing 777-300ER Project Opensky. I repainted this file, there are two Standards, namely there is a skyteam logo next to the cockpit window (PK-GIK) which is not only the Indonesian flag (PK-GIA), and there is an additional 2018 Asian Games livery in (PK-GIF), Republic of Indonesia ( PK-GIG), Retro Livery (PK-GIK), and the livery I made is skyteam. This file is suitable for FSX. If there is a problem contact [email protected], facebook https://www.facebook.com/justin.s.56884, and Instagram https://www.instagram.com/jpmo90/
| Filename: | Garuda_Indonesia_Boeing_777300ER_Livery_standard_A.zip |
| License: | Freeware |
| Added: | 7th October 2021, 22:57:09 |
| Downloads: | 326 |
| Author: | Justin Heinrich Raphael Simangunsong |
| Size: | 116.32 MB |
| Category: Flight Simulator X - Flight Plans | |
| iFly 737NG Flight Plan Orlando International Airport - Grand Rapids Gearld R Ford International Airport for FSX and FSX SE |
|
File Description:
This file contains information for the route for a flight between Orlando,Florida and
Casacade Township, Michigan 13 miles south of Grand Rapids Michigan.
for the iFly 737NG using the following airports:
Departure:Orlando International Airport
IATA:MCO
ICAO:KMCO
FAA LID:MCO
WMO:72205
Destination: Grand Rapids Gerald R. Ford International Airport
IATA:GRR
ICAO:KGRR
FAA LID:GRR
| Filename: | iFly_737NG_Flight_Plan_Orlando_International_Airpo.zip |
| License: | Freeware |
| Added: | 25th March 2025, 18:12:36 |
| Downloads: | 4 |
| Author: | David M. Long |
| Size: | 2.23 KB |
| Category: Flight Simulator X - AI Aircraft | |
| jetBlue Bombardier C Series CS300 |
|
Images related to this file:
File Description:
Attached is a Jetblue repaint for the new cseries 300
I have included 2 paints
1- Blue Bubbles
1- Blue Pattern w/ ontimeflights.org on fuse (they've been adding this to random aircraft)
you must have the FSPXAI Payware model for these to work
http://secure.simmarket.com/fspxai-bombardier-c-series-fsxp3d-ai-traffic.phtml
Looks great in JB colors!
Let me know with any questions.
Michael Ullman
[email protected]
| Filename: | jetBlue_Bombardier_C_Series_CS300.zip |
| License: | Freeware |
| Added: | 5th October 2017, 07:24:21 |
| Downloads: | 256 |
| Author: | FSPXAI CS300. Model and Paintkit by: FSPXAI - repaint by Michael Ullman |
| Size: | 5.8 MB |
| Category: Flight Simulator X - Sounds | |
| Boeing 777 General Electric GE90-115B Sound Pack |
|
File Description:
SkyHigh Audio Simulations and Audiosim are proud to present what is quite possibly the most realistic sounding GE90 sound pack available for the 777! This sound pack is designed to work with ANY model in FSX, but more so intended for Posky's 777s with GE90 engines. This sound pack includes many unique and realistic features, including realistic start up 'mooing' sounds and the famous GE90 growl. FSX exclusive features include real 3D sounds providing a much more realistic exterior sound experience. Also distant sounds are included, such as distant start up 'mooing' noises. Realistic interior ambiance noises such as the touchdown, flaps, gear sound, and more are featured in this sound pack. Please visit our website at: www.skyhighflightsim.webs.com, or Audiosim's website at: www.audiosim.webs.com for more info and sound packs from Audiosim!
| Filename: | Boeing_777_General_Electric_GE90115B_Sound_Pack.zip |
| License: | Freeware |
| Added: | 25th November 2011, 09:23:04 |
| Downloads: | 17,461 |
| Author: | Adam Murphy and Jesse Casserly - Skyhigh Audio Simulations, Max Cossette - Audiosim |
| Size: | 57.67 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FSXC Boeing 747-400 |
|
File Description:
747-400 Exclusive FSX Contest Livery
Enjoy, have fun !!!
Take some screenshots or videos and send them to www.facebook.com/fsxcontest
Thanks a lot
FSX Photo and Video Contest Team
| Filename: | FSXC_Boeing_747400.zip |
| License: | Freeware, limited distribution |
| Added: | 18th April 2014, 05:59:01 |
| Downloads: | 29 |
| Author: | Kristof De Vos, Vista Repaint, FSX Photo and Video Contest; fsxcontest |
| Size: | 1.99 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |