Category: Orbiter - Spaceships
FA-18A at KSC

File Description:
Take off in the FA-18A from KSC airport..Press 9 to operate the Tail Hook..Press B for airbrakes, Press F for flaps, Press G for Gear.Press F8 for VC with HUD and MFD's when in cockpit mode.Use the mouse to look aound VC while holding the right mouse button.Press CTRL and + on the numpad for Thrust.Use Insert and Delete to set Trim..Press K for Cockpit Lights and Strobes at Night..Press J to Jetason your droptank when your Reserve Tank is empty to switch to Main Tanks..The Virtual Cockpit Gear Lever and Throttle is clickable, to adjust the Thrust Lever click above and below it to move it up and down..Click the Gear Lever to Raise and lower the Gear...Has Engine Sounds (needs OrbiterSound 3.0 or higher installed).Unzip into your Orbiter folder.(Make sure - Use Folder names is ticked when using winzip.)**Made for Orbiter 060929 Only**

Filename:	FA18A_at_KSC.zip
License:	Freeware
Added:	5th November 2006, 20:27:31
Downloads:	235
Author:	Kev Shanow
Size:	1.89 MB

Category: Flight Simulator 2004 - Original Aircraft
Piaggio PD-808RM (Base Pack)

File Description:
This is a complete simulation of the Piaggio PD-808. It includes advanced engine management, realistic systems, and some failure modeling. The model features a complete 3-D virtual cockpit,and a 2-D panel. Sounds are inculded. The external model features all typical animations plus a load of custom ones. Also incluides all custom special effects, including different selectable floodlights for the virtual cockpit (by simply flicking ON the proper light switch on the cockpit itself). Plus with a fly-on-the-numbers flight dynamics file. Includes full documentation. THIS IS THE FS-2004 RELEASE. IT WILL NOT WORK PROPERLY WITH FS-X. THERE IS ALSO A FS-X RELEASE THAT WILL NOT WORK PROPERLY WITH FS-2004. THis is the "RM" variant of the aircraft and base package. Other PD-808 variants will come next. This base package with the RM version will be needed for these to work properly.

Filename:	Piaggio_PD808RM_Base_Pack.zip
License:	Freeware
Added:	27th January 2009, 13:46:47
Downloads:	5,656
Author:	Mario Noriega
Size:	18.58 MB

Category: Flight Simulator 2004 - Panels
Boeing 737-400 V.1 Add-On

File Description:
// Only Patch!!! for BOEING 737-400 PANEL Version 1. for FS2004/FS2002 // *****This is the THIRD and FINAL patch for those users who were missing some of the gauges (BAT, yaw damper, anti ice, clock and AP number). It also corrects the mistake on AP VS window and some other little mistakes. I would like to ask the fellow pilots who have downloaded the faulty version to download this corrected version. These files are only the add ons for B737-400 panel named tu734v1.zip. They cannot be used without the main panel folder (tu734v1.zip). There are 2 separate panel folders for both MS default B737-400 (with virtual cockpit) and all other 737-400 aircrafts (without virtual cockpit). This add on contains the new AP numbers, Eng and Wing Anti-ice light and switches, Yaw Damper light and switch, Speed brake lights, Clock, Battery***** Credit goes to Fabrizio Berretta for some of the gauges.

Filename:	Boeing_737400_V1_AddOn.zip
License:	Freeware
Added:	22nd January 2004, 02:14:22
Downloads:	11,469
Author:	Targan Unutmaz
Size:	4.65 MB

Category: Flight Simulator 2004 - Panels
Boeing 377 Wide-Screen Panel - complete package

File Description:
Hi, this is a widescreen panel for the California Classics Stratocruiser from Tom Gibson, also includes reworked VC-textures.

I tried to use a more real gauge layout. Full gauge backlight in 2D panel, switchable cabin light in VC and new night light textures. VC-textures in 4 different looks. Switch and Brake sounds. Shockwave lights and real engine start activated by default (could be changed). I decided to make this package because of the many different files that are available. You only have to extract one file and all should be working, I hope :)

Latest updates and 7 repaints included. One reworked TWA dirty bare metal repaint. Also the best prop sound I know (subjective) by Des Braban and Friedrich Trachsel is in. Please read the Readme for instructions. Screenshots inside!
All Credits to Tom Gibson, Bruce Smythe, Des Braban, Friedrich Trachsel and repaint authors. Thanks to all gauge authors! Most gauges from Ken Mitchell, special thanks to him! Enjoy!

Filename:	Boeing_377_WideScreen_Panel__complete_package.zip
License:	Freeware
Added:	30th September 2012, 19:52:13
Downloads:	892
Author:	Tom Gibson, Bruce Smythe, Des Braban, Friedrich Trachsel, Wilhelm Hudetz
Size:	101.54 MB

Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications
FSX Boeing 737-800 Fixer ** Update **

File Description:
There are several issues with the DEFAULT Boeing 737-800 that Microsoft didn't ever fix. The first is the taxi light ground splash is mapped with the landing lights so you have to turn on the landing lights to see anything at night. Second, they defined 3 exits in the aircraft.cfg, but only enabled 2. Third, the switches that control the landing lights is reversed. You have to flip the switch to the OFF position to get the lights to come ON, same with the inoperable Retractable light swtiches. Lastly, the wingtip nav/strobes were poorly positioned. This package includes a reworked B737_800.mdl file that fixes the taxi light, B737_800.cab with the modified Overhead_Popup.XML to fix the gauges and a partial Aircraft.CFG that includes my modifications to the aircraft.CFG to fix the lights and exits. There is also a utility included that will self-install these items without any fuss. See the Readme.txt for more information.

Filename:	FSX_Boeing_737800_Fixer__Update_.zip
License:	Freeware
Added:	22nd August 2014, 09:58:20
Downloads:	1,777
Author:	Aaron Parsons
Size:	4.65 MB

Category: Flight Simulator 2004 - Miscellaneous Files
Procedures for the LevelD Boeing 767-300

File Description:
English: This file is a PDF with a german / english manual with procedures, to bring the Level-D 767 from, "Cold'n'Dark" into the air. The FMC programming, loading and fueling isn't described, therefor I advise the great PMDG 737 / 747 Tutorials of Jens-Albert Schenk. The FMCs of the Boeing 767 are looking alike them from the 737 or 747! Who can handle with 737s or 747s FMC, can handle the 767s FMC too. These Procedures contain everything, the pilot has to do, but not all control-tasks. That means, U can find every Switch, U have to push numbered in the corrosponding panel, that U can proserously get from "Cold'n'Dark" into "After Takeoff" I Don't made any description for the Procedures from "Climb and Cruise" until "Secure", because there are essentially used the same switches. In addendum can U find a 2D-Picture of the Lightpanel with a description and real airline checklists. Please read the provided english-manual of the levelD 767!!

Filename:	Procedures_for_the_LevelD_Boeing_767300.zip
License:	Freeware
Added:	6th December 2005, 21:30:13
Downloads:	11,509
Author:	Jörg Heidrich
Size:	1.57 MB

Category: Flight Simulator X - Original Aircraft
Piaggio PD-808RM (Base Pack)

File Description:
This is a complete simulation of the Piaggio PD-808. It includes advanced engine management, realistic systems, and some failure modeling. The model features a complete 3-D virtual cockpit,and a 2-D panel. Sounds are inculded. The external model features all typical animations plus a load of custom ones. Also incluides all custom special effects, including different selectable floodlights for the virtual cockpit (by simply flicking ON the proper light switch on the cockpit itself). Plus with a fly-on-the-numbers flight dynamics file. Includes full documentation. THIS IS THE FS-X RELEASE. IT WILL NOT WORK PROPERLY WITH FS-2004. THERE IS ALSO A FS-2004 RELEASE THAT WILL NOT WORK PROPERLY WITH FS-X. THis is the "RM" variant of the aircraft and base package. Other PD-808 variants will come next. This base package with the RM version will be needed for these to work properly.

Filename:	Piaggio_PD808RM_Base_Pack.zip
License:	Freeware
Added:	27th January 2009, 13:48:00
Downloads:	6,630
Author:	Mario Noriega
Size:	18.65 MB

Category: Flight Simulator X - Original Aircraft
Piaggio PD-808GE

File Description:
NEEDS FSX_PD808RM.ZIP TO WORK. WORKS UNDER DX-9 MODE ONLY! THIS PACKAGE DOES NOT INCLUDE THE NEEDED PANEL, GAUGES AND SOUNDS. This is a complete simulation of the Piaggio PD-808. It includes advanced engine management, realistic systems, and some failure modeling. The model features a complete 3-D virtual cockpit,and a 2-D panel. The external model features all typical animations plus a load of custom ones. Also incluides all custom special effects, including different selectable floodlights for the virtual cockpit (by simply flicking ON the proper light switch on the cockpit itself). Plus with a fly-on-the-numbers flight dynamics file. Includes full documentation. THIS IS THE FS-X RELEASE. IT WILL NOT WORK PROPERLY WITH FS-2004. THERE IS ALSO A FS-2004 RELEASE THAT WILL NOT WORK PROPERLY WITH FS-X. THis is the "GE" variant of the aircraft and requires the base package "FSX_PD808RM.zip" to work.

Filename:	Piaggio_PD808GE.zip
License:	Freeware
Added:	15th February 2009, 11:55:01
Downloads:	2,063
Author:	Mario Noriega
Size:	14.19 MB

Category: Flight Simulator X - Scenery
Chatham Islands for Vector Land Class New Zealand

Images related to this file:

File Description: This project is a modified version of the Chatham_Islands.zip project which allows my landclass and airports to work seamlessly with the free Chatham Islands scenery available from Vector Land Class New Zealand. This package allows the user to switch back and forth easily between the different scenery combinations and also provides standalone Chatham and Pitt Island airports which can be used with the Vector Land Class (VLC) scenery on its own. It also allows the user to take advantage of the 15m terrain mesh and added water detail that comes with the VLC scenery. A modified Pitt Island AI runway is also included that is compatible with the 15m mesh. Chatham Islands/Tuuta Airport (NZCI), Napier (NZNR), and the Pitt Island Airstrip (NZPI) are included here. Scenery was created using Airport Design Editor X v1.47.07, SBuilderX 3.13, and the FSX Object Placement Tool. Scenery objects were added and modified from stock FSX scenery to resemble as closely as possible the actual airports.

Filename:	Chatham_Islands_for_Vector_Land_Class_New_Zealand.zip
License:	Freeware
Added:	15th July 2011, 21:54:43
Downloads:	931
Author:	Carlyle Sharpe
Size:	3.78 MB

Category: Orbiter - Spaceships
LC-39 with VAB SCA-747 and MDD Part2

File Description:
Part 2 of the New Launch Complex 39A&B with new VAB, MDD and OPF.*Important* ,you must have the K-SCA-VAB-MDD-LC39.zip file installed first before you install this add-on.It can be found at www.avsim.com ..Part 2 includes a Tail-Cone for the SCA with Shuttle,Orbiter Transporter and Fuel Tank Tansporter...For the Mate Demate Scenario - Press G to lower your Gear,then switch to MDD using F3.Press A then quickly press K and hold Left Shift and press 0 on the numpad..Press K to operate the MDD.Press G to open the Orbiter entry Door on the VAB.Press K to open the Tank entry door on the VAB. Take off in the SCA-747 with Default Atlantis Shuttle Attached from KSC airport.Press G to raise your gear.Press + and CTRL to engage your thrust..Uses Vinka's new Spacecraft3.DLL.(included)..Has Engine Sounds (needs OrbiterSound 3.0 or higher installed).Unzip into your Orbiter folder.Click Yes for All when asked to overwrite.(Make sure - Use Folder names is ticked when using winzip.)

Filename:	LC39_with_VAB_SCA747_and_MDD_Part2.zip
License:	Freeware
Added:	27th July 2006, 04:14:10
Downloads:	818
Author:	Kev Shanow
Size:	614.29 KB