Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - AFCAD Files | |
| Parker Airport (70NJ), NJ |
|
File Description:
Located 02 miles S of Asbury, New Jersey on 13 acres of land, Parker Airport is a private turf strip located on residential property. This airport is challenging in many ways. For one, when approaching from the southeast the airport is located immediately after a tall ridge, so when topping this ridge at altitude you may not even see the airport over the nose of your aircraft before you overfly it. The runway for this airport is 1600' feet long but it is curved and slightly sloped perpendicular to your roll, so significant rudder will be needed to stay aligned - be careful when operating with any crosswind component! It is highly recommended that you only depart via Runway 25 and arrive via Runway 07 to avoid having to clear significant obstacles prior to landing or after taking off. This airport has no hard-surfaced runway and there is a very noticeable "bump" in the terrain halfway down the runway that will literally bounce your aircraft into the air - I tried my best to smooth it over but could not get rid of it entirely. When taking off make sure you have back pressure applied so your main gear only bounce you high enough to remain within ground effect - hitting your nose wheel can cause an extreme pitch up leading to a stall. Trees close in tight to the runway at the end of Runway 07 or the start of Runway 25, however collision has been disabled with the trees nearest the runway so you can scrape some branches if needed on the takeoff/landing rolls. The author has successfully departed and arrived on both runways in the default Cessna 172 under moderate crosswind from the northeast. This field may definitely require some practice but it is usable!! This airport has no edge lighting, so daytime VFR operations only are recommended.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Parker_Airport_70NJ_NJ.zip |
| License: | Freeware |
| Added: | 10th February 2011, 05:04:30 |
| Downloads: | 215 |
| Author: | Drew Sikora |
| Size: | 559.02 KB |
| Category: Microsoft Flight Simulator (2020) - Utilities | |
| FBWA320_LINDA_Module_ByJujunet_v0.2 |
|
File Description:
This module allow to control hidden controls of the FBW A320, using LINDA software and FSUIPC
Require : FSUIPC ver 7 full licence, Microsoft Flight Simulator
Installation :
Uncompress archive in any place.
Move A32nx.evt file to your FSUIPC root folder.
Move A320.hvar on \Community\fsuipc-lvar-module\modules
On LINDA software :
Click on "Maintenance", on top, select "--aircrafts--".
Click on "Select Source Folder", below "Import Aircraft Module", browse to the folder FBWA320, click on "Import", or "Overwrite" if updating
This module for Linda freeware allows to bind :
-Landing and Nose light independently
-Seat-belt
-No Smoking
-Mode and zoom on ND
-Display function ARPT, VOR, WPT, NDB... on ND
-Terrain on ND
-Eicam pages, with an encoder
-ILS
-Barometer increment and decrement with automatic detection of position (HPA or inHg)
-Toggle between HPA and inHg
-Toggle between QNH setting and STD
-Autobrake Cycle
-Full compatibility for Managed/Selected on SPD, HDG, ALT and Selected mode on VS
To create your own module, or customize this one, go to my Youtube Tutorial :
My channel : https://www.youtube.com/channel/UCVgdlnaAk2Q4EOSCICW_0iA
Changelog :
Version 0.1 : Initial Release
Version 0.2 : Update to working with FBWA320 v0.8.0
| Filename: | FBWA320_LINDA_Module_ByJujunet_v02.zip |
| License: | Freeware |
| Added: | 12th July 2022, 18:21:02 |
| Downloads: | 47 |
| Author: | Julien GICQUIAUD |
| Size: | 17.55 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| CropDusterX Compatibility Mod for Alabeo's Pawnee |
|
Images related to this file:
File Description:
This package modifies Alabeo's Piper Pawnee for a seamless use with Lorby-SI's CropDusterX, a dynamic, not mission based crop-dusting module (both payware, to be purchased separately).
Both external and VC models were modified as follows :
- Lightbar display added just behind the cowling (the bar can be toggled close to the windshield to improve readibility of the dot lines in some harsh lighting conditions)
- Control panel for the Satloc equipment added in the VC for easy and immersive use
- Dusting agent level window (right in front of the control stick) changes with the load carried by the Pawnee
- Dusting works only if :
- electrical power is available
- spray system switch is on
- spray shut-off valve is open
- spray fan brake is released
- airspeed above 50 kn
Alabeo's load simulating gauge is desactivated to allow CDX to run smoothly.
This mod also includes small changes/fixes by yours truly :
- The radio requires electrical power and radio switch on to emit/receive comms
- the spray fan between the landing gear spins if the airspeed is above 50 kn and that the fan brake is released
| Filename: | CropDusterX_Compatibility_Mod_for_Alabeos_Pawnee.zip |
| License: | Freeware |
| Added: | 28th November 2020, 20:11:02 |
| Downloads: | 431 |
| Author: | Rémi "Kekelekou" Hugouvieux |
| Size: | 18.83 MB |
| Category: Prepar3D V1-4 - Scenery | |
| KJFK - John F. Kennedy International Airport - New York (NY), USA |
|
File Description:
Prepar3D Scenery--John F. Kennedy International Airport (KJFK), New York (NY), USA. This file updates Ray Smith's KJFK scenery previously uploaded for use with FSX. Ray has given me permission to adapted his scenery for Prepar3Dv2 and replaces file Prepar3d_rwc_kjfk.zip This airport update incorporates two optional files, one version with the Crosswind runways activated and in full operation where all 4 runways will be used for takeoff/landing and one version as the default runway operation: assigned parking now updated as per their website including gates for the A380, Terminal 3 demolished, Delta has now moved much of its operations to T4 as well as using T2, the new terminal extension added to T4 concourse B and allocated only for Delta connection, taxiways and taxi signs updated to the latest charts, the freeway traffic that crosses taxiways A and B now ends before these taxiways, Autogen around the water edges of the airport removed, support vehicle roads rebuilt and many other improvements, airport views are from the roof of the control tower (when in tower view) please view the readme before installation. By Robert Catherall.
| Filename: | KJFK__John_F_Kennedy_International_Airport__New_Yo.zip |
| License: | Freeware |
| Added: | 9th October 2015, 19:10:40 |
| Downloads: | 24,194 |
| Author: | Robert Catherall |
| Size: | 2.91 MB |
| Category: X-Plane - Scenery | |
| BR SP SBGP - Gaviao Peixoto Embraer Airport v1.0.0 |
|
Images related to this file:
File Description:
This is an X-Plane 11 and X-Plane 10 scenery package for Embraer Unidade Gavião Peixoto Airport (ICAO: SBGP, no IATA code) is a private airport located in a rural area near Gavião Peixoto and Araraquara, in Brazil. It is owned and operated by Embraer and used as for testing civil and military aircraft. Additionally, this scenery also includes a grass airstrip (SJAW Fazenda Citrica Airfield), a rural citrical farm facility for agricultural aviation. You can try landing there with your favorite prop aircraft. It's located around 1nm or 2nm northeast of SBGP airport. It includes corrected aprons, ramps, gates, taxiways, lighting system, Araraquara city buildings, ortho-photoscenery for the airfield area, and (XP11 only) airport ground services (like push back). This scenery was tested and is operational (as of March 18, 2017) in "X-Plane 11 Public Beta #15 64 bit", Windows 10 Home. It was also tested and is also operational (as of March 18, 2017) in "X-Plane 10.51 64 bit", Windows 10 Home. Only the default X-Plane 11 libraries, by Laminar Research, are needed. No third party libraries are used.
| Filename: | BR_SP_SBGP__Gaviao_Peixoto_Embraer_Airport_v100.zip |
| License: | Freeware |
| Added: | 19th March 2017, 08:13:27 |
| Downloads: | 95 |
| Author: | Rui Mesquita |
| Size: | 21.63 MB |
| Category: Flight Simulator X - Scenery | |
| RAF Barkston Heath - 1944 |
|
File Description:
At the time of its construction, RAF Barkston Heath in common with a number of other airfields in the Grantham area had been planned for the RAF's No. 7 Group. In late 1943, Barkston Heath was made available to the United States Army Air Forces Ninth Air Force and designated as USAAF station 483. It was earmarked for basing troop carrier units scheduled to be transferred from Sicily to participate in the forthcoming cross-Channel invasion, Operation "Overlord"
American 61 TCG aircraft based at Barkston Heath carried British paratroops on the ill-fated operation Market Garden.
The USAAF returned control of the airfield to the Air Ministry in June 1945 when the war in Europe ended. Barkston Heath was used by No 256 Maintenance Unit and No 2 RAF Regiment. Beginning in May 1948.,
RAF Barkston Heath has the Naval and Army Elements of No. 3 Flying Training School (3 FTS) which, for a period between approximately 1995-2010 operated the Slingsby T67M260 Firefly two-seat trainer. The school now operates the Grob Tutor T1. A secondary role of RAF Barkston Heath is as a Relief Landing Ground for the flying training activities at RAF Cranwell.
Source: Wikipedia
| Filename: | RAF_Barkston_Heath__1944.zip |
| License: | Freeware |
| Added: | 10th March 2017, 07:13:15 |
| Downloads: | 150 |
| Author: | Terry Boissel |
| Size: | 1.05 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Air France Boeing 777-200ER & Boeing 777-300ER |
|
File Description:
Two aircraft are included in this package: B772 AF F-GSPY and B773 AF F-GSQB.
Those planes were completely hand painted, new exterior night lights were designed, and added many static effects to give it a realistic touch. Furthermore, this package includes a completely hand painted interior area, with the new style "Nouveaux Espaces de Voyages". This rendition of the Boeing 777 has been completely built from scratch in Gmax and features a 32-sided fuselage and engines; "maintenance mode" featuring opening engine cases, deployable Ram Air Turbine, opening gear bay doors on ground, opening captain's window; virtual cabin (first, business, tempo class); folding wings; reflective textures; flexing wings; dynamic wing views; animated reversers with animated fan air blocker doors; see through engines; animated landing gear with fully modeled struts and hydraulic pistons. Also featuring animated flexible gear hoses; animated flaps, slats, ailerons, elevators and spoilers with animated hydraulic pistons; advanced logic nose gear and main gear steering; animated primary and secondary rudder; dynamic shine and reflective surfaces; 3D APU; 3D gear, flap, slat bays; seamless wing root fairing; dimensioned to high accuracy; accurate flight dynamics; extremely detailed all round. Original v2 model by MelJet (Melvin Rafi).
| Filename: | Air_France_Boeing_777200ER__Boeing_777300ER.zip |
| License: | Freeware |
| Added: | 20th September 2004, 18:33:27 |
| Downloads: | 8,617 |
| Author: | Julien Scavini |
| Size: | 8.21 MB |
| Category: Flight Simulator 2004 - Scenery | |
| PADL - Dillingham - Alaska, USA |
|
Images related to this file:
File Description:
Dillingham is a town with a population of around 2,300 at the southeast corner of the Bering Sea in Bristol Bay, 70 miles west of King Salmon. The town's economical well being is based on the commercial price of salmon and the numerous surrounding sport fishing lodges. FS9 shows the town as way more extensive than it is; the landclass textures correct this. The airport is a mile west of the town and has a single runway 6,400 feet long and orientated 01-19. There are scheduled passenger flights by Alaska Air (numerous in summer and non-existant in winter) and PenAir (year around) plus cargo flights by Everts and Northern Air Transport, and local scheduled flights by Grant Air; the AI includes these, plus GA. The GA gravel apron is behind the main apron and across a road, which is unusual. The parking on the asphalt apron is marked; in actuality there are no markings but landing at a field in FS9 that doesn't have a control tower leaves one wondering where to go; the six spots at the far northern end are unused by AI and free for visitors.
| Filename: | PADL__Dillingham__Alaska_USA.zip |
| License: | Freeware, limited distribution |
| Added: | 14th May 2015, 17:35:29 |
| Downloads: | 393 |
| Author: | Roger Wensley |
| Size: | 10.39 MB |
| Category: Flight Simulator 2004 - Scenery | |
| CYCQ - Chetwynd - British Columbia, Canada |
|
Images related to this file:
File Description:
The town of Chetwynd (population around 2,600) is on the east side of the Rocky Mountains, the first town to be encountered when descending from the Rockies on highway 97. Previously known as Little Prairie, the town name was changed in 1962. The main occupations of the town are linked to forestry, fossil fuels, and transportation; there are railway lines north to Fort St John, east to Dawson Creek, and south to Prince George. The airport is on the southern side of the town, with one runway aligned 05-23, asphalted in 1975 and just under 4,500 feet long. There are no scheduled services, although a new terminal building was constructed in 2008, and the helicopter operations by at least two companies (oil and gas and medical evacuation flights) are the primary operations from the field. These are included in the AI, incorporating helicopter modifications made by Holger Sandmann so that they function properly as AI at an airfield. As an aside, landing like a plane and using the runway and taxiways is in fact exactly what a helicopter does at a normal airfield in real life; everyone does the same thing so that guessing is unneccesary.
| Filename: | CYCQ__Chetwynd__British_Columbia_Canada.zip |
| License: | Freeware, limited distribution |
| Added: | 28th March 2016, 21:36:33 |
| Downloads: | 298 |
| Author: | Roger Wensley |
| Size: | 18.84 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| British Asia Airways Boeing 747-436 'G-CIVE' City of Sunderland |
|
File Description:
Project Opensky 747-400 V4. Model Features include fully animated control surfaces, fully independent suspension, main gear steering, trim animation, opening passenger doors, opening cargo doors, dynamic flexing wings, animated tilting bogies, rolling wheels, animated thrust reversers, fully reflective textures ( each part has different degree of reflection based on material ), accurate flight dynamics ( accurate FDE with full profiles for wheels, tires, struts, leading/trialing struts, engine types ... Tested by real pilots.), newly re-defined individual part damage profiles, accurate spoiler animation, detailed textures, full night lighting, visible landing lights from the cockpit, reflective cockpit windows, crash effects, transparent nav light lenses, newly re-defined individual part damage profiles. Model Designer Hiroshi Igami. Flight Dynamics Designer Warren C. Daniel. Tested by Project Open Sky Members. Master textures by Corey Ford/Yosuke Ube. This download contains the most recent model and FDE updates. British Asia Airways operated as a British Airways subsidiary from 1995 to 2001 and operated flights from Taipai to Heathrow. The British Asia Airways livery differs from the BA livery by having two Chinese characters on the tail instead of the union tail
| Filename: | British_Asia_Airways_Boeing_747436_GCIVE_City_of_S.zip |
| License: | Freeware |
| Added: | 25th May 2008, 17:15:50 |
| Downloads: | 619 |
| Author: | Stephen Groom | Project Opensky |
| Size: | 10.67 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |