Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - AFCAD Files | |
| Strawberry Fields Airport (89NJ), NJ |
|
File Description:
Located 02 miles N of Mays Landing, New Jersey on 220 acres of land, Strawberry Fields Airport is a private turf/sand strip. SkyVector lists the runway as 2200' long, but as measured during development it is closer to 3000'. In addition to Runways 14 and 32, there is a second runway that is not listed in the airport directory and presumed closed. However if you need it in an emergency the numbers are 03 and 21 (no starts are available for these runways). This airport is not lit and is best used only during daytime VFR conditions. The windsock can be found at the intersection of the two runways and is also not lit. You will be landing on bare terrain so have your mesh complexity slider set as high as possible for best effect.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Strawberry_Fields_Airport_89NJ_NJ.zip |
| License: | Freeware |
| Added: | 17th February 2011, 07:55:52 |
| Downloads: | 204 |
| Author: | Drew Sikora |
| Size: | 1.75 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Hammonton Municipal Airport (N81) NJ |
|
File Description:
Located 03 miles NE of Hammonton, New Jersey on 107 acres of land, Hammonton Municipal Airport is a public asphalt strip 3601' in length. It has recently been renovated with all-new taxiways and aprons and this update is depicted in this version with the big change being the extension of the main apron to join the previously-separated north and south tarmacs. The airport's magnetic variation, traffic pattern height, and PAPI glide slope and location have also all been accurately adjusted. All tie down parking locations are located on either the North or South tarmacs. Parking spots marked as RAMP_GA are occupied by static aircraft/objects and should not be chosen to start in (although all static objects have collision disabled). North parking spots can accommodate wingspans up to 50' while South parking spots should only be used by aircraft with wingspans of 40' or less. The one DOCK_GA location in the hangar start that can accommodate aircraft with wingspans up to 45'. The helicopter start location will place you on the North tarmac in front of the main hangar. Fuel is available by stopping on the concrete area on the North tarmac or by the fuel truck on the South tarmac in front of the hangars. Please see the ReadMe for known issues regarding AI aircraft parking.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Hammonton_Municipal_Airport_N81_NJ.zip |
| License: | Freeware |
| Added: | 5th June 2011, 06:22:53 |
| Downloads: | 202 |
| Author: | Drew Sikora |
| Size: | 897.82 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Windward Farms Airport (4NJ0), NJ |
|
File Description:
Located 02 miles NW of Rosemont, New Jersey, Windward Farms Airport is a private turf strip. Like most small private turf strips this one can prove to be slightly challenging when it comes to taking off and landing - especially in a crosswind. The runway threads between two separate stands of trees to either side, and 1/4 of the Runway 11 left side is hedged by small trees and bushes. While the published dimensions for this strip are 3500x150 feet, in reality the usable runway space is really 3000x100 feet due to vegetation. This airport as rendered in FSX does not have an actual runway surface, so when you land you will be landing on actual terrain. There isn't a noticeable slope but it can be bumpy so use caution! Edge lighting is provided for the runway, although night landings/takeoffs are not recommended. There are no services provided by this airfield. After landing why not taxi over to the hangar and feed the sheep grazing in the pasture?
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Windward_Farms_Airport_4NJ0_NJ.zip |
| License: | Freeware |
| Added: | 1st February 2011, 10:29:23 |
| Downloads: | 201 |
| Author: | Drew Sikora |
| Size: | 563.16 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Herr Mountain Airport (5NJ2), NJ |
|
File Description:
Located 02 miles N of Stanton, New Jersey, Herr Mountain Airport is a private turf strip. No aircraft are based here, so don't expect much except for ample room to land and take off again. There is a residence on the property, but no hangar or storage facilities. The runway is 2800x100 feet so not too hard to arrive and depart from. Approaching Runway 25 can be a slight challenge given that you need to level off your descent to cross over a mountain top before diving in to land. There is no hard surface runway, so you will be landing on terrain - be gentle! It's recommended to have your mesh complexity set as high as possible to get the full effect. The runway is not lit so daytime VFR operations only are allowed at this airport.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Herr_Mountain_Airport_5NJ2_NJ.zip |
| License: | Freeware |
| Added: | 1st February 2011, 23:06:28 |
| Downloads: | 187 |
| Author: | Drew Sikora |
| Size: | 422.37 KB |
| Category: Flight Simulator X - Scenery | |
| Boca Raton, FL Airport (KBCT) |
|
Images related to this file:
File Description:
One runway and taxiway for private jets of the rich and famous. Generic floating buildings have
been replaced with custom and library objects. Landclass changes, roads, rework of runways,
taxiways and aprons, placement of library objects and a library of new airport buildings are
included. Scenery in this package is based on Virtual Earth (Bing) and Google Earth imagery. An
optional AI Traffic file is also included to populate the airport with executive aircraft.
| Filename: | Boca_Raton_FL_Airport_KBCT.zip |
| License: | Freeware |
| Added: | 5th February 2011, 03:10:42 |
| Downloads: | 2,308 |
| Author: | Art Poole |
| Size: | 2.95 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Rainbow's End Airport (JY39), NJ |
|
File Description:
Located 07 miles S of Salem, New Jersey on 20 acres of land, Rainbow's End Airport is a private turf strip 2200' in length. There are no services for transient aircraft and the airport is not lit at night, so daytime VFR operations only are recommended. If you have an aircraft with 40' or less of wingspan you can start at one of the parking spaces east or west of the runway by the hangars. Otherwise it is suggested you start on the runway. There is no hard surfaced runway so set your terrain mesh as high as possible.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005 & New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Rainbows_End_Airport_JY39_NJ.zip |
| License: | Freeware |
| Added: | 12th May 2011, 00:58:29 |
| Downloads: | 173 |
| Author: | Drew Sikora |
| Size: | 626.46 KB |
| Category: Flight Simulator X - Scenery | |
| NL2000 v4.01 EHLE Lelystad Airport |
|
Images related to this file:
File Description:
This is the NL2000 v4.01 EHLE Lelystad Airport package for the NL2000 scenery version 4.
You need the NL2000 v4.0.20 installer to install this package.
The Netherlands 2000 v4 Scenery is a modular free FSX scenery covering the Netherlands.
Visit our website for other available packages.
By The Netherlands 2000 Scenery Design Team (www.nl-2000.com).
| Filename: | NL2000_v401_EHLE_Lelystad_Airport.zip |
| License: | Freeware |
| Added: | 14th May 2011, 17:19:48 |
| Downloads: | 1,345 |
| Author: | The Netherlands 2000 scenery design team |
| Size: | 39.98 MB |
| Category: Flight Simulator X - Scenery | |
| NL2000 v4.01 EHOW Oostwold Airport |
|
Images related to this file:
File Description:
This is the NL2000 v4.01 EHOW Oostwold Airport package for the NL2000 scenery version 4.
You need the NL2000 v4.0.20 installer to install this package.
The Netherlands 2000 v4 Scenery is a modular free FSX scenery covering the Netherlands.
Visit our website for other available packages.
By The Netherlands 2000 Scenery Design Team (www.nl-2000.com).
| Filename: | NL2000_v401_EHOW_Oostwold_Airport.zip |
| License: | Freeware |
| Added: | 14th May 2011, 17:20:14 |
| Downloads: | 1,546 |
| Author: | The Netherlands 2000 scenery design team |
| Size: | 18.42 MB |
| Category: Flight Simulator X - Scenery | |
| NL2000 v4.01 EHTE Teuge Airport |
|
Images related to this file:
File Description:
This is the NL2000 v4.01 EHTE Teuge Airport package for the NL2000 scenery version 4.
You need the NL2000 v4.0.20 installer to install this package.
The Netherlands 2000 v4 Scenery is a modular free FSX scenery covering the Netherlands.
Visit our website for other available packages.
By The Netherlands 2000 Scenery Design Team (www.nl-2000.com).
| Filename: | NL2000_v401_EHTE_Teuge_Airport.zip |
| License: | Freeware |
| Added: | 14th May 2011, 17:21:08 |
| Downloads: | 1,210 |
| Author: | The Netherlands 2000 scenery design team |
| Size: | 22.16 MB |
| Category: Flight Simulator X - Scenery | |
| NL2000 v4.01 EHTW Enschede Airport |
|
Images related to this file:
File Description:
This is the NL2000 v4.01 EHTW Enschede Airport Twente package for the NL2000 scenery version 4.
You need the NL2000 v4.0.20 installer to install this package.
The Netherlands 2000 v4 Scenery is a modular free FSX scenery covering the Netherlands.
Visit our website for other available packages.
By The Netherlands 2000 Scenery Design Team (www.nl-2000.com).
| Filename: | NL2000_v401_EHTW_Enschede_Airport.zip |
| License: | Freeware |
| Added: | 14th May 2011, 17:21:24 |
| Downloads: | 983 |
| Author: | The Netherlands 2000 scenery design team |
| Size: | 59.2 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |