Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Douglas VC-118-DO 'The Independence' |
|
File Description:
Built at Santa Monica, CA (c/n 42881/29) as the personal aircraft of President Harry S. Truman. It was named 'The Independence' after President Truman's home town in Missouri. The aircraft was delivered on 1 July 1947 and served from 4 July 1947 on as a presidential aircraft till 1953 when Gen. Dwight Eisenhower became President of the USA. It seems that the rather special paint job was based on an idea by President Truman himself. 46-0505 served on as a general VIP transport till 1966 when it was donated to the Smithonian Institute for preservation. It is on loan to the Air Force Museum at Wright-Patterson AFB, Ohio. 'The Independence' could accommodate for 24 day or 12 sleeper passengers (in the main cabin). It had a luxurious State Room aft of the passenger door. Usually there was a crew of eight. It is featured here in its original tan, blue and metal livery. You will require Jens B. Kristensen's great Douglas DC-6 (early version) (dc6_v10.zip). Original textures by Jens B. Kristensen. Repaint by Maarten Brouwer.
| Filename: | Douglas_VC118DO_The_Independence.zip |
| License: | Freeware, limited distribution |
| Added: | 30th November 2008, 02:42:57 |
| Downloads: | 427 |
| Author: | Maarten Brouwer |
| Size: | 2.31 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Flight Tested Mods for FSX PA28 to get Realistic Warriors |
|
File Description:
This mod is aimed to the beautiful Australian Simulation FSX PA28 Warrior Version 2, and corrects its few (but annoying) defects.
I'm a private pilot lucky enough to have enjoyed a couple hundreds hours on PA28s and, in my opinion, the result is a beautiful, realistic, FLIGHT TESTED FSX aircraft!
---
FIXES:
1 - LONGITUDINAL AXIS STABILITY FIXES:
a) Turns are now stable: when you put the plane in a turn and center ailerons, the plane will keep its bank angle until new aileron movements. No more sudden and unrealistic "auto-leveling"!
b) Fuel tanks unbalances effects are cut down, since they are irrelevant in real life.
2 - AILERON TRIM removed since it's not present in real airplane - SORRY ;-)
3 - FUEL PUMP NOISE replacement for the excessive default FSX sound.
----
SOFTWARE FULLY SUPPORTED:
Australian Simulation FSX PA28-161 Warrior Version 2.
OTHER PA28 WARRIOR SOFTWARE:
NOT TESTED but you can try without risk if you follow the installation procedure, WITHOUT REPLACING YOUR CFG FILES - This will offer you a good flight model, although not fully fixed.
| Filename: | Flight_Tested_Mods_for_FSX_PA28_to_get_Realistic_W.zip |
| License: | Freeware |
| Added: | 5th February 2009, 20:28:30 |
| Downloads: | 439 |
| Author: | Pierre Baron |
| Size: | 393.55 KB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Fuerza Aerea Uruguaya De Havilland D.H.82A Tiger Moth B1-601 and B2-602 |
|
File Description:
Fuerza Aerea Uruguaya(Aeronáutica Militar)D.H.82A Tiger Moth B1-601(C/N 3617) ex 15.
and B2-602(C/N 3310)ex 2.Year 1948.
The Tiger Moth BI-601 one of the 18 D.H.82A Tiger Moth operated by the Aeronáutica Militar
between 1935 and 1949.This particular plane arrived with a batch of nine planes in 1937.
From October 1941 was registred as B1-601(Base Aeronáutica No.1-Boiso Lanza,plane 601).
Traslated to base No.2 in Durazno in 1948,the plane come back to Boiso Lanza in 1949
and flight the last mission with Tiger Moth of the Aeronáutica Militar the 18-05-49.
The Tiger Moth B2-602 arrived with the first batch of five planes in 1935.
From October 1941 was registred as B2-602(Base Aeronáutica No.2, plane 602).
The plane was written off after a take off accident at the Aeroclub de Tacuarembó the 15-05-48.
Original by Warwick Carter.
Repainted,flight dynamics and revised panel by Daniel Nole.FAUsim http://fau510.webs.com/
| Filename: | Fuerza_Aerea_Uruguaya_De_Havilland_DH82A_Tiger_Mot.zip |
| License: | Freeware |
| Added: | 3rd April 2009, 07:36:55 |
| Downloads: | 173 |
| Author: | Daniel Nole |
| Size: | 8.78 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Douglas VC-118-DO 'The Independence' |
|
File Description:
This Douglas VC-118-DO was the personal aircraft of President Harry S. Truman. It was named 'The Independence' after President Truman's home town in Missouri. The aircraft was delivered on 1 July 1947 and served from 4 July 1947 on as a presidential aircraft till 1953 when Gen. Dwight Eisenhower became President of the USA. It seems that the rather special paint job was based on an idea by President Truman himself. 46-0505 served on as a general VIP transport till 1966 when it was donated to the Smithonian Institute for preservation. It is on loan to the Air Force Museum at Wright-Patterson AFB, Ohio.'The Independence' could accommodate for 24 day or 12 sleeper passengers (in the main cabin). It had a luxurious State Room aft of the passenger door. Usually there was a crew of eight. It is featured here in its original tan, blue and metal livery. You will require Jens B. Kristensen's great FSX Douglas DC-6 (early version) (dc6_v20x.zip). Original textures by Jens B. Kristensen. Repaint by Maarten Brouwer.
| Filename: | Douglas_VC118DO_The_Independence.zip |
| License: | Freeware, limited distribution |
| Added: | 22nd February 2009, 02:31:30 |
| Downloads: | 250 |
| Author: | Maarten Brouwer |
| Size: | 2.12 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Douglas VC-118-DO 'The Independence' |
|
File Description:
This Douglas VC-118-DO was the personal aircraft of President Harry S. Truman. It was named 'The Independence' after President Truman's home town in Missouri. The aircraft was delivered on 1 July 1947 and served from 4 July 1947 on as a presidential aircraft till 1953 when Gen. Dwight Eisenhower became President of the USA. It seems that the rather special paint job was based on an idea by President Truman himself. 46-0505 served on as a general VIP transport till 1966 when it was donated to the Smithonian Institute for preservation. It is on loan to the Air Force Museum at Wright-Patterson AFB, Ohio.'The Independence' could accommodate for 24 day or 12 sleeper passengers (in the main cabin). It had a luxurious State Room aft of the passenger door. Usually there was a crew of eight. It is featured here in its original tan, blue and metal livery. You will require Jens B. Kristensen's great FS2004 Douglas DC-6 (early version) (dc6_v20.zip). Original textures by Jens B. Kristensen. Repaint by Maarten Brouwer.
| Filename: | Douglas_VC118DO_The_Independence.zip |
| License: | Freeware, limited distribution |
| Added: | 22nd February 2009, 19:27:07 |
| Downloads: | 245 |
| Author: | Maarten Brouwer |
| Size: | 2.17 MB |
| Category: Flight Simulator X - AFCAD Files | |
| UKOO - Odesa Intl. Odesa, Ukraine |
|
File Description:
Odesa International Airport(IATA: ODS, ICAO: UKOO) is an airport located 7 km (4.3 mi) southwest from the centre of Odesa, Ukraine.
It serves both domestic and international flights. Airport's runways either were or are co-used by the Ukrainian Air Force.
The airport was built in 1961. In 2009, the airport served 651,000 passengers.
The area of Odessa International airport is 570 hectares. The airport concerns to group of the largest airports of Ukraine and connects Odesa by airlines with many cities of Ukraine and CIS, Western Europe, Asia and Africa.
Technical service of airport is based on 2800 square meters area and represented by 4 parking places to provide technical service to 4 planes simultaneously. European standards classify the airport as "class 1".
In May 2007, the airport started construction work that includes extending the main runway. The airport has ILS CAT I status.
The airport charts can be found here.
This file has the right coordenates, with the apron and characteristics of the airport and buildings.
| Filename: | UKOO__Odesa_Intl_Odesa_Ukraine.zip |
| License: | Freeware |
| Added: | 19th October 2012, 23:37:31 |
| Downloads: | 3,038 |
| Author: | Anwar Gonzalez |
| Size: | 484.36 KB |
| Category: Prepar3D V1-4 - Scenery | |
| YMML - Melbourne (Tullamarine) Intl Airport, Victoria, Australia |
|
File Description:
This is Ray Smith's scenery file "fsx_ymml_rs.zip". Ray has given me permission to make his file available for Prepar3D v3. This airport is made with two versions: one version with the Crosswind runway 9/27 activated where both runways will be used for takeoff/landing and one version as the default runway operation: The new Terminal 4 concourse G added, assigned parking as per the their website including 6 gates for the A380, all International flights depart and arrive at the Terminal 2 (T2 - International) Qantas flights depart and arrive from Terminal 1 (T1 - Domestic) Virgin Australia flights depart and arrive from Terminal 3 (T3 - Domestic) and Regional Express (REX) arrives at Terminal 3 (T3 - Domestic). Tigerair and Jetstar flights depart and arrive from Terminal 4 (T4 - Domestic) and Regional Express (REX) departs at Terminal 4 (T4 - Domestic) taxiways and taxi signs updated to the latest charts, extra fuel trucks, support vehicle roads rebuilt and many other scenery improvements, airport views are from inside the control tower (when in tower view) please view the readme before installation.
| Filename: | YMML__Melbourne_Tullamarine_Intl_Airport_Victoria_.zip |
| License: | Freeware |
| Added: | 24th February 2017, 19:48:04 |
| Downloads: | 22,196 |
| Author: | Robert Catherall |
| Size: | 1.47 MB |
| Category: Flight Simulator X - Miscellaneous Files | |
| DX10 Shader Fixers V3.2.3 |
|
File Description:
DX10 Shader Fixes V3.2.3. These are a set of shader fixes for DX10 Preview mode in FSX. The patch should not effect DX9 in any way. It addresses the following bugs in the DX10 preview:
1) Flashing runways/taxiways
2) Yellow/white runway markings transparency
3) Opaque chain fences
4) Progressive Taxi markings missing
5) Missing night scenery/semi-transparent dusk scenery (often misdescribed as missing night textures)
6) Some addon cars with black headlights
7) Softer VC shadow
8) Eliminates false sun on VC roof and side wall
9) ORBX FTX Global lights with black background rectangles fixed
Also included are an optional replacement water shade, aircraft lights package and an optional replacement background texture. This can replace the light blue DX10 uses and is close to what DX9 uses in the same circumstances.
With Steve Parson's permission I have updated the shader_release_v3.2.2 patch to shader_release_v3.2.3 to now include a fix for DX10 ORBX FTX Global Lights.
| Filename: | DX10_Shader_Fixers_V323.zip |
| License: | Freeware, limited distribution |
| Added: | 11th July 2014, 13:56:13 |
| Downloads: | 35,576 |
| Author: | Steve Parsons / Steve Waite |
| Size: | 429.52 KB |
| Category: Flight Simulator X - Scenery | |
| KOAK - Metro Oakland Intl |
|
Images related to this file:
File Description:
This is a reasonably accurate and up-to-date version of Metro Oakland Intl airport with two optional files and made only for FSX users, do not use in P3D: There is one version with the Crosswind runways operating where all 4 runways will be used for takeoff/landing and one version as the default airport runway operation.
This update removes the "jfk jetways" mainly for those who have had issues installing the textures to get these Jetway to display, these have now been replaced by Jetway extensions that are more like the real world, Terminals 1 and 2 rebuilt with something better than the stock airport, assigned parking as per their website with extra parking, the Fedex and UPS ramps and buildings replaced, all taxiways and taxi signs updated to the latest charts, support vehicle roads rebuilt, extra fuel trucks, Helipad added to the GA apron and many other scenery improvements and objects added, airport views are from inside the control tower (when in tower view) please view the readme before installation.
| Filename: | KOAK__Metro_Oakland_Intl.zip |
| License: | Freeware, limited distribution |
| Added: | 29th January 2020, 01:05:10 |
| Downloads: | 44,388 |
| Author: | Ray Smith |
| Size: | 8.78 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Santorini LGSR Big Scenery 2012 (airport and full island scenery) |
|
Images related to this file:
File Description:
This FS2004 project is about the greek Santorini island (located in the Aegean Sea 200 km southeast from Greece's mainland) and contain two main scenery parts:
1) the "Santorini (Thira) International Airport" (Iata: JTR, Icao: LGSR) where you'll find all buldings (airport and close sourroundings buildings), hundred of custom made detailed objects, static and animated vehicles, animated scenery parts and various effects.
2)the Santorini island scenery where you'll find real hand-made landmarks (churches, factories, windmills,harbors and more), boats/ferries, completely redesigned landclasses with custom (seasonal+night) ground textures, coastlines, roads, main towns with custom greek textures, extreme autogen density and a lot of objects.
Every scenery part (frame-rate friendly thanks to the low poly design) has photoreal textures and everything is placed in the right position (wich was found at spring 2012) and in according to the satellite image.English extendet handbook is included. Watch the screenshot and the demo video on the Albysim youtube chanel and enjoy all scenery features (in this free/demo edition some features are limited).
| Filename: | Santorini_LGSR_Big_Scenery_2012_airport_and_full_i.zip |
| License: | Check within download |
| Added: | 4th November 2012, 13:13:55 |
| Downloads: | 4,719 |
| Author: | Albysim Scenery Design (Alberto Di Bolzano) |
| Size: | 35.43 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |