AVSIM Library
|
Login | Register | About logging in and out
|
|
|
|
|
|
|
Autoland gauge v2.1
|
|
File Description: FS2004 Autoland gauge Version 2.1. Provides full hands-off autoland capability for all airliners. Simple installation. By Martyn Becker, adapted and amended from original XML programming by Nick Pike. File size - 198kB
Filename: |
autoland_v21.zip |
License: |
Freeware |
Added: |
19th April 2008, 13:36:39 |
Downloads: |
6592 |
Author: |
Martyn Becker |
Size: |
198kb |
|
Takeoff / Vspeeds
|
|
File Description: This FS2004 gauge calculates / displays / callsout the Vspeeds (V1,Vr,V2), Gear-
and configuration warnings during takeoff.
The Vspeeds are calculated based on the actual aircraft's weight and flaps
position, with a correction for temperature and pressure altitude.
It can be adapted to any aircraft by simply editing the .xml gauge with Notepad,
entering the Vspeed values (at high and low weight) for your aircraft.
Instructions and examples are included.
By Rob Barendregt
Filename: |
rcbvs-24.zip |
License: |
Freeware, limited distribution |
Added: |
23rd May 2005, 20:51:03 |
Downloads: |
6473 |
Author: |
Rob Barendregt |
Size: |
100kb |
|
sRadar80 Navigational Radar
|
|
File Description: FS2004 Gauge: sRadar80, navigational radar- This nose-mounted, forward-scanning radar will display simulated echoes from ground-based targets that will assist navigation. Screen blips represent FS objects located within the simulator world. With six ranges available (2nm-80nm), cross-country radar navigation and low visibility approaches are possible (see pictures). Scan sensitivity (GAIN) allows adjustments to minimize screen clutter. On-screen wiper scan, push-to-display nm scale, plus many other features. For panel and window installations with included icon gauge. Also, tutorial illustrating a radar approach using the features of sRadar80. By Glenn Copeland
Filename: |
sradar80.zip |
License: |
Freeware |
Added: |
29th April 2006, 04:54:56 |
Downloads: |
6235 |
Author: |
Glenn Copeland |
Size: |
230kb |
|
JELAIR - Automatic V-Speed Callout
|
|
File Description: This gauge adds a co-pilot that will call-out the V-speeds during the takeoff-run (the V-speeds are also visually shown before takeoff for pre-flight verification). The V-speeds are calculated dynamically depending on aircraft-weight and flap-setting. It has been successfully tested on these aircraft: B732, B752, B741 and B742, but should work with most other popular commercial jetliners also (the auto-calculated V-speeds do not neccessarily match the true-life V-speeds of every individual aircraft down to the last exact knot, but should be close enough for good clean sim-takeoff's)
Filename: |
jelair-fs2004_vspeed-callout_gauge.zip |
License: |
Freeware |
Added: |
15th June 2005, 01:48:03 |
Downloads: |
6191 |
Author: |
Jacob Larsen |
Size: |
98kb |
|
Cockpit Commander
|
|
File Description: FS2004 Gauge: Cockpit Commander. This 28-push button powerhouse will greatly simplify life in a busy cockpit. It uses a numeric pad to enter frequencies into Comm 1 and C2, Nav 1 and N2, and the ADF. It will set headings, course, altitude, VS, and IAS airspeed functions on the AP. Gauge contains an efficient layout for ATC responses for use during hectic IFR approaches because they are located on gauge by autopilot. Has K-key for quick "000" entry. Panel or separate window install.
Filename: |
cpitcmdr.zip |
License: |
Freeware |
Added: |
6th March 2006, 21:42:11 |
Downloads: |
6162 |
Author: |
Glenn Copeland |
Size: |
155kb |
|
Airbus A320 Audio Switch Panel for PSS
|
|
File Description: This freeware XML Audio Switch Gauge gauge for FS2004 can be added PSS Airbus Panels. It offers the following features: - Switching VHF1/2 send. - Switching VHF1 / VHF1+2 listen. - Marker Beacon, ADF, NAV1, NAV2 sound receive switches. See README for extensive description. By Philipp Stein.
Filename: |
pssaudio.zip |
License: |
Freeware, limited distribution |
Added: |
17th October 2005, 13:28:03 |
Downloads: |
6151 |
Author: |
Philipp Stein |
Size: |
12kb |
|
Boeing 767-300 Pedestal Digital Pitch Trim (Level-D)
|
|
File Description: Digital Pitch Trim Display gauge for LVL-D767/FS9. This gauge is designed for use with the LVL-D B767. It's displaying digital pitch trim on 2D pedestal. CAUTION: After installation (see included txt file), run 767-300 Configuration Manager, eventually without any modifications, but SAVE configuration then exit BEFORE running FS9, in order to save and activate your new panel.
Filename: |
b767pedestaldigitalpitchtrim.zip |
License: |
Freeware |
Added: |
18th August 2006, 00:39:54 |
Downloads: |
6083 |
Author: |
Gauthier Halbardier |
Size: |
7kb |
|
Missing Gear Gauge in Nimrod MR2
|
|
Other files which are related to, or may be required by, this file:
File Description: This installs the gear gauge omitted from the Nimrod MR2
Filename: |
nimrod_gear.zip |
License: |
Freeware |
Added: |
29th November 2004, 14:28:39 |
Downloads: |
5906 |
Author: |
Brian Franklin |
Size: |
61kb |
|
Pushback/Tow/Taxi Gauge Version 1.2
|
|
File Description: This is version 1.2 of my groundhandling gauge that now supports the ability to tow the aircraft in addition to the pushback and taxi features. This update adds keyboard support for the control of all groundhandling features to support hardware cockpits, and some minor sound and cosmetic changes. Use this version over version 1.1. The hot key popup feature allows this gauge to be used in VC and external views. Enjoy!
Filename: |
atngau12.zip |
License: |
Freeware, limited distribution |
Added: |
25th September 2004, 05:54:27 |
Downloads: |
5887 |
Author: |
Etienne Martin |
Size: |
739kb |
|
Descentometer
|
|
File Description: FS2004 Gauge: Descentometer, for precise and controlled descents. This gauge will assist in positioning your aircraft at a specified altitude and distance from the destination airport. Using ICAO and altitude info, vertical speed and slope are continually processed and displayed during a flight. At any point, the VS needed to descend and arrive at a desired altitude and distance from the airport is known. D'meter handles both continuous or stepped descents from high altitudes. When placed in AUTO, the gauge will control the descent by continually updating the autopilot with VS data. When approaching the airport, the gauge can be placed in Runway mode to monitor or control slope flown to runway. With illustrated PDF and Icon Gauge. By Glenn Copeland.
Filename: |
descentometer.zip |
License: |
Freeware |
Added: |
14th August 2006, 02:53:00 |
Downloads: |
5616 |
Author: |
Glenn Copeland |
Size: |
304kb |
|
|