Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Curtiss P-40N Warhawk (NL540TP) |
|
Images related to this file:
File Description:
A repaint only for the payware Flight Replicas P-40N Warhawk. This repaint depicts the restored P-40N 42-105306, registered NL540TP. The aircraft originally served in the Pacific with the 7th FS, 49th FG, and was one of a few P-40's flown by Lt. Ray Melikian. Later, while being flown by Lt. Marion Hawke, the aircraft was substantially damaged when it collided with a P-47 while attempting to land at the Iron Range Repair Depot in Queensland, Australia. The aircraft remained abandoned at the old airfield until being recovered in 1973. The airframe passed through several notable hands over the years before finally being purchased by Chris Prevost in 2000, who had the aircraft shipped to the Sonoma Valley airport where the restoration to airworthy began. Doing much of the work himself, over almost a decade, Prevost flew the aircraft for the first time in January 2009. Fitted with dual controls, the aircraft's original pilot, Ray Melikian, was able to fly the aircraft again. Included with this repaint is a set of updated files for my "Little Jeanne" repaint.
| Filename: | Curtiss_P40N_Warhawk_NL540TP.zip |
| License: | Freeware |
| Added: | 31st July 2013, 15:26:43 |
| Downloads: | 172 |
| Author: | John Terrell |
| Size: | 13.14 MB |
| Category: Flight Simulator 2004 - AI Aircraft | |
| Italian Air Force Lockheed F-104 Starfighter (Part 2) |
|
Images related to this file:
File Description:
Italian Air Force Lockheed F-104 Starfighter (Part 2), aka the Zipper, Coffin Nail, Widowmaker, Flying Coffin, or Missile with a Man in It; in untrained hands it resembles a lawn dart, as nicknamed by the Canadians. I present a comprehensive AI traffic model package for this hotrod of military jet history. Going into production in 1955, this aircraft was manufactured, directly or by license, by 6 countries, and served the air forces of 17 countries. Late examples served until 2004, nearly fifty years after its introduction. An original 7-LOD model brings this historic aircraft to the flightsim world. This 2-part package represents the Lockheed F-104 in the service of the Italian Air Force; with a total of 40 models and 164 repaints. Aircraft models covered are the F-104G, RF-104G, TF-104G, F-104S (both fighter-bomber and air superiority variants), and the F-104ASA. I am also including some optional variants with separate manual install instructions. Original aircraft model and textures by Michael Pearson, flight dynamics by Michael MacIntyre.
| Filename: | Italian_Air_Force_Lockheed_F104_Starfighter_Part_2.zip |
| License: | Freeware |
| Added: | 22nd June 2013, 18:19:57 |
| Downloads: | 734 |
| Author: | Michael Pearson |
| Size: | 28.57 MB |
| Category: Flight Simulator 2004 - AI Aircraft | |
| Italian Air Force Lockheed F-104 Starfighter (Part 1) |
|
Images related to this file:
File Description:
Italian Air Force Lockheed F-104 Starfighter (Part 1), aka the Zipper, Coffin Nail, Widowmaker, Flying Coffin, or Missile with a Man in It; in untrained hands it resembles a lawn dart, as nicknamed by the Canadians. I present a comprehensive AI traffic model package for this hotrod of military jet history. Going into production in 1955, this aircraft was manufactured, directly or by license, by 6 countries, and served the air forces of 17 countries. Late examples served until 2004, nearly fifty years after its introduction. An original 7-LOD model brings this historic aircraft to the flightsim world. This 2-part package represents the Lockheed F-104 in the service of the Italian Air Force; with a total of 40 models and 164 repaints. Aircraft models covered are the F-104G, RF-104G, TF-104G, F-104S (both fighter-bomber and air superiority variants), and the F-104ASA. I am also including some optional variants with separate manual install instructions. Original aircraft model and textures by Michael Pearson, flight dynamics by Michael MacIntyre.
| Filename: | Italian_Air_Force_Lockheed_F104_Starfighter_Part_1.zip |
| License: | Freeware |
| Added: | 22nd June 2013, 18:18:39 |
| Downloads: | 673 |
| Author: | Michael Pearson |
| Size: | 29.44 MB |
| Category: Flight Simulator X - Scenery | |
| Wynoochee Lake WA - (Bob's Fly-in Cabin) |
|
File Description:
Wynoochee Lake WA (Bob's Fishing Cabin) - Airport ID: BOB (FSX). - -
This is a fictitious fly-in lodge that I created for a quiet spot to fly into for weekend trips from the Seattle area. My cabin is located about 40 miles due south of Port Angeles, WA and about 50 miles due west of Seattle. - -
Wynoochee Lake is a real location, but my scenery around the lake is fictitious. - -
You will find my dirt airstrip to be quite challenging, although completely fly-able. My location is even more challenging at dawn or dusk with Weather. There are no approach lights, its just a rugged bush strip. - -
It is extra challenging with crash detection turned on - watch out for those birds, they're everywhere and that old tree just of the side of the dirt strip - don't get too close! - -
This is freeware. I hope you enjoy it. - -
Designed with the FS X Sdk Scenery function of the Mission builder,Abacus Scenery shortcut tool and Lee Swordy's AFCAD. - -
This scenery is frame rate friendly. - - Please read the "readme" - -
by Bob Caparoula
www.flydeervalley.com
| Filename: | Wynoochee_Lake_WA___Bobs_Flyin_Cabin.zip |
| License: | Freeware |
| Added: | 2nd February 2007, 21:10:37 |
| Downloads: | 1,455 |
| Author: | Bob Caparoula |
| Size: | 4.64 KB |
| Category: Flight Simulator X - Scenery | |
| California Central Coast with Megascenery Earth and FSGenesis Mesh |
|
Images related to this file:
File Description:
California Central Coast Scenery for FSX with Megascenery Earth and FSGenesis mesh. CCFSXMSG.ZIP covers the California coastal region from N36° 10' (Coalinga) to N34° 25' (Santa Barbara) and from the coast East to W119° 40'. It is a version of my previously created California Central Coast scenery redesigned and expanded to work with FSX MegaScenery Earth and FSGenesis USA Terrain Mesh for FSX V2 by Justin Tyme. Airstrips in the area covered by this scenery have been added for a total of 27 airports and airstrips. 6 imaginary water runways are also added for AI float plane traffic. Several other areas of interest such as the Santa Barbara marina, Morro Bay, etc. are included for a total of 41 points of interest. All airports, airstrips and related structures have been adjusted and realigned to conform to actual positions and dimensions as indicated by the MegaScenery Earth satellite textures. Megascenery Earth California-13, -14 and -15 are required and -12, -28 and -29 are recommended. By Al Wheeler 9/25/09.
| Filename: | California_Central_Coast_with_Megascenery_Earth_an.zip |
| License: | Freeware |
| Added: | 7th January 2010, 19:54:57 |
| Downloads: | 870 |
| Author: | Al Wheeler |
| Size: | 8.13 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Rainbow's End Airport (JY39), NJ |
|
File Description:
Located 07 miles S of Salem, New Jersey on 20 acres of land, Rainbow's End Airport is a private turf strip 2200' in length. There are no services for transient aircraft and the airport is not lit at night, so daytime VFR operations only are recommended. If you have an aircraft with 40' or less of wingspan you can start at one of the parking spaces east or west of the runway by the hangars. Otherwise it is suggested you start on the runway. There is no hard surfaced runway so set your terrain mesh as high as possible.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005 & New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Rainbows_End_Airport_JY39_NJ.zip |
| License: | Freeware |
| Added: | 12th May 2011, 00:58:29 |
| Downloads: | 173 |
| Author: | Drew Sikora |
| Size: | 626.46 KB |
| Category: Flight Simulator 2004 - Scenery | |
| EPWA - Warsaw Chopin Airport - Warsaw, Poland ** UPDATED VERSION `` |
|
Images related to this file:
File Description:
EPWA WARSAW CHOPIN AIRPORT 2015 DEMO features an extremely detailed scenery of EPWA Chopin airport in Warsaw, Poland, fully compatible with FS2004.
This product is a fully functional DEMO version of the commercial payware product. It features same airport layout as in the full version but with limited 3D objects and low resolution textures. Using this free demo ensures no problems with online (VATSIM, IVAO, multiplayer etc.) flying in case some users use the payware scenery and some don't.
Warsaw Chopin Airport (WAW / EPWA) is is an international airport located in Warsaw, Poland's capital, which handles just under 40% of the country's air passenger traffic. There are two crossing runways (2800m and 3690m), a number of hangars, a cargo terminal and a passenger terminal, completely rebuilt in 2008-2015.
The product is equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all previous versions of this airport you may have installed before. Please make also sure that no duplicated AFCAD files are installed.
Enjoy your virtual flying with Drzewiecki Design!
| Filename: | EPWA__Warsaw_Chopin_Airport__Warsaw_Poland___UPDAT.zip |
| License: | Freeware, limited distribution |
| Added: | 4th March 2016, 15:54:50 |
| Downloads: | 1,035 |
| Author: | Drzewiecki Design |
| Size: | 15.67 MB |
| Category: Flight Simulator 2004 - AI Aircraft | |
| Douglas DC-7 for AI Traffic |
|
Images related to this file:
File Description:
Douglas DC-7 for AI Traffic. The DC-7 propliner was designed for long-range commercial transport, being one of the first aircraft to utilize the polar routes from Europe to North America. Although the DC-7 was a very advanced aircraft for its time of production, it was produced at the cusp of the commercial jetliner age and was quickly eclipsed by a new generation of air travel. Subsequently the DC-7 was not as commercially successful as its predecessors, and only a handful remain in the cargo and aerial firefighting roles. In conjunction with Jake Burrus, I present an 8-LOD AI traffic model to bring this classic transport aircraft to the flightsim world. This package includes 14 models, 40 repaints, and a Photoshop paint kit. The paints in this package focus on DC-7 use from the 1970s to present day, with a few vintage paints thrown in. Aircraft model and master textures by Jake Burrus and Michael Pearson, flight dynamics and repaints by Michael Pearson.
| Filename: | Douglas_DC7_for_AI_Traffic.zip |
| License: | Freeware |
| Added: | 14th July 2015, 20:54:18 |
| Downloads: | 969 |
| Author: | Michael Pearson |
| Size: | 23.99 MB |
| Category: Flight Simulator X - Scenery | |
| SimFly Baghdogra X V0.84.70 (NEW) |
|
Images related to this file:
File Description:
INSTALLATION INFORMATION AND PROCEDURE IS IN THE EXECUTABLE FILE. PLEASE RUN THE INSTALLER AND FOLLOW THE INSTRUCTIONS. AFTER INSTALLATION IS COMPLETE PLEASE VIEW THE PDF FILE. THIS IS NEWER VERSION. PLEASE DOWNLOAD.
Bagdogra Airport, (IATA: IXB, ICAO: VEBD) is an international airport located in about 16 km (9.9 mi) west of the cities of Siliguri, 52 km (32 mi) away from Jalpaiguri and 65 km (40 mi) away from Darjeeling, the cities which the airport mainly serves, at Bagdogra in Darjeeling district in northern West Bengal, India. FEATURES- 1.High detailed representation of Baghdoghra Customs Airport (VEBD). 2.Includes current real world airport expansions and modifications (July 2016) 3. High resolution “realistic†looking textures (2048/2048) 4. Night lighting 5. Guaranted 20 FPS with 4GB RAM. OTHER FEATURES- 1. AIR FORCE AREA ADDED. 2. CUSTOM HIGH DETAILED GROUND POLYGON. 3. ADDED MANY CUSTOM MODELLED BUILDINGS AND AIRPORT OBJECTS. 4. COMPATIBLE WITH FSX, FSX SE, P3D V2 AND ABOVE. FOR MORE INFORMATION VIEW OUR WEBSITE AT http://simflydevelopers.wixsite.com/simflydevelopers/baghdogra-airport-vebd
SUPPORT-
[email protected]
WHATSAPP US AT- 91 8017751759
| Filename: | SimFly_Baghdogra_X_V08470__NEW.zip |
| License: | Freeware, limited distribution |
| Added: | 7th March 2017, 18:04:20 |
| Downloads: | 793 |
| Author: | Saptarshee Mandal @ Simfly developers |
| Size: | 83.35 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Himalayas LOD9 Base Mesh, Volume 5 - Hindu Kush and Pamir |
|
Images related to this file:
File Description:
Detailed terrain mesh of the Hindu Kush and Pamir Ranges, N32-40 E70-76. The files in this package are based on Shuttle Radar (SRTM) Version 2 data but with many of the void areas, especially the most significant sections, filled with elevation data generated from topographic maps by Jonathan de Ferranti. While Jonathan's work is unrelated to flight simulation he kindly gave me permission to compile his data for use in FS. The result is a wonderful improvement in detail and accuracy over any existing mesh file, freeware or commercial, based on SRTM or DTED data alone.
Due to the large area of the Himalayas I've compiled the source data as two separate series: the "Himalayan Peaks" series covers prominent mountains and ranges in higher detail and locally overrides any existing LOD9 terrain mesh. In addition, the LOD9 "base mesh" series, with LOD8 and LOD7 "buffer" mesh files, covering the entire Himalayas, is meant for those who do not yet have an add-on terrain mesh of these beautiful mountains.
| Filename: | Himalayas_LOD9_Base_Mesh_Volume_5__Hindu_Kush_and_.zip |
| License: | Freeware, limited distribution |
| Added: | 29th May 2010, 08:57:29 |
| Downloads: | 7,603 |
| Author: | Holger Sandmann, Jonathan de Ferranti |
| Size: | 85.72 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |