Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Prepar3D V1-4 - Original Aircraft | |
| Focke Wulf FW-200C series |
|
File Description:
The Focke Wulf FW 200 C series was a long-distance sea reconnaissance aircraft of the German Luftwaffe in World War II. world war. It was developed from the civilian version FW 200 A and B and then by the Luftwaffe used in different versions.
The civilian version has been developed by Hauke ​​Keitel in a very well implemented add-on. he has uploaded this AddOn on FlightSim.com under the name P3D v4 Focke Wulf Fw200A2 as a file fw200a2-1.zip released.
After consultation, Mr. Keitel gave permission to add this add-on and to release the extension under the same terms as its original specifications. I now have done the extension of the Luftwaffe versions as the series using the original FW 200 C0 to FW-200 C8, made as good and close to the original as I can. The models were developed and tested exclusively for P3D 4.5. Possible that you also can use in FSX and other P3D versions. However, I can neither check nor guarantee this. Please note the conditions specified in the original readme file by Mr. Hauke ​​Keitel. They of course are also fully valid for my extensions, since this extension is based on the original and this is absolutely necessary.
The package also includes a version for AI planes.
Please copy and add this to your AI aircraft directory . Airfields appearing in near future will use them for AI traffic.
The supplied extension contains only the files necessary for the supplement and alone it is not executable.
I hope you will enjoy these models.
| Filename: | Focke_Wulf_FW200C_series.zip |
| License: | Freeware |
| Added: | 5th March 2022, 16:46:21 |
| Downloads: | 138 |
| Author: | Klaus Nowak |
| Size: | 180.09 MB |
| Category: X-Plane - Original Aircraft | |
| F-111F Aardvark v1.1 |
|
File Description:
F-111F Aardvark v1.1 for X-Plane 6.40/6.51 - After a prolonged gestation period in which many, many problems had to be identified and fixed, the F-111 turned out to be one of the most effective all-weather interdiction aircraft in the world. Although vilified by some as being an unsafe and dangerous plane, the F-111 series of aircraft established the best safety record of any of the aircraft in the Century Series of fighters with only 77 aircraft being lost in a million flying hours. There was no other aircraft in service with the USAF which can carry out the F-111's mission of precise air strikes over such long ranges in all-weather conditions. Although the aircraft has left USAF service, it still serves with distinction with the Royal Australian Air Force and may very well continue until 2020. The original concept for the F111 was for both a USAF and US Navy version. Weight problems led to cancellation of the Navy version in 1968.
The F111 was the first swing wing fighter, the first with a side by side escape capsule for the operators and the first able to cruise at over mach 1 without after burning. It was also the first bomber with greater than mach 2.5 capability. The F version has a wingspan of 63.0 ft. spread, a length of 73.5 ft. and is powered by two 25100 lb static thrust engines with afterburning. Gross takeoff weight is 100,000 lb., maximum ordinance 31,000 lb and internal fuel 5025 USgal. Range is greater than 2500 nm with internal fuel and service ceiling is above 60000 ft.
| Filename: | F111F_Aardvark_v11.zip |
| License: | Freeware, limited distribution |
| Added: | 12th March 2003, 04:35:23 |
| Downloads: | 1,078 |
| Author: | Robert App |
| Size: | 160.52 KB |
| Category: X-Plane - Original Aircraft | |
| F-111F Aardvark For X-Plane 6.40/6.51 |
|
File Description:
F-111F Aardvark for X-Plane 6.40/6.51 - After a prolonged development period in which many, many problems had to be identified and fixed, the F-111 turned out to be one of the most effective all-weather interdiction aircraft in the world. Although highly critisized by some as being an unsafe and dangerous plane, the F-111 series of aircraft established the best safety record of any of the aircraft in the Century Series of fighters with only 77 aircraft being lost in a million flying hours (that's hours not miles). There was no other aircraft in service with the USAF which could carry out the F-111's mission of precise air strikes over such long ranges in all-weather conditions. Although the aircraft has left USAF service, it still serves with distinction with the Royal Australian Air Force and may very well continue there until 2020. The original concept for the F111 was for both a USAF and US Navy version. Weight problems led to cancellation of the Navy version in 1968.
The F111 was the first swing wing fighter, the first with a side by side escape capsule for the operators and the first able to cruise at over mach 1 without after burning. It was also the first bomber with greater than mach 2.5 capability. The F version has a wingspan of 63.0 ft. spread, a length of 73.5 ft. and is powered by two 25,100 lb static thrust engines with afterburning. Gross takeoff weight is 100,000 lb., maximum ordinance 31,000 lb and internal fuel 5025 USgal. Range is greater than 2500 nm with internal fuel and service ceiling is above 60000 ft.
| Filename: | F111F_Aardvark_For_XPlane_640651.zip |
| License: | Freeware, limited distribution |
| Added: | 26th February 2003, 02:08:23 |
| Downloads: | 486 |
| Author: | Robert App |
| Size: | 169.58 KB |
| Category: Flight Simulator 2004 - Sounds | |
| Douglas DC-6 sound.cfg V.3 |
|
File Description:
This sound.cfg replaces the one uploaded in August 2008. Both the interior and exterior sounds have been improved. Please replace the sound.cfg you already downloaded by this new one. In my search for a good sound for the Douglas DC-6/-6A/-6B/-6C, XC-112A/YC-112A, VC-118, the C-118A/R6D-1 series and the Canadair C-5, I struck on the fabulous soundpack for the beautiful Douglas A-26 Invader of Milton Shupe and the Sim-Outhouse Team, made by David C. Copley. Most of the wav-files in this soundpack are recordings of the Pratt & Whitney Double Wasp R-2800 engines of an A-26 Invader. Having studied the Invaders sound pack, I discovered that by ‘tweaking’ the sound.cfg, particularly with regard to the exterior sounds, it became possible to develop a good exterior DC-6 sound (4 engines). No changes were made to the wav-files, as I didn’t want to modify them; the
wav-files just sound wonderful. In order to make your system reproduce the DC-6 sound, first download from www.sim-outhouse.com the great Douglas A-26 Invader package and enjoy flying that plane. Then copy the sound pack of the A-26 to the DC-6, and replace the existing sound.cfg by the revised one you just downloaded. This DC-6 sound has been tested in FS2004 only. Special thanks to David C. Copley who gave his permission to upload the modified sound.cfg as freeware, with limited distribution, at Sim-Outhouse.com and Avsim.com. Many thanks also to Milton Shupe and to Wayne Tudor for his advise. Author of the original sound pack: David C. Copley. Modified sound.cfg: Maarten Brouwer.
| Filename: | Douglas_DC6_soundcfg_V3.zip |
| License: | Freeware, limited distribution |
| Added: | 6th October 2008, 19:20:54 |
| Downloads: | 1,043 |
| Author: | David C. Copley & Maarten Brouwer |
| Size: | 365.92 KB |
| Category: Flight Simulator X - AFCAD Files | |
| KEGE - Eagle County Regional - Eagle, Colorado USA * FIX * |
|
File Description: KEGE - Eagle County Rgnl - Eagle, CO, USA version 1.1 by Jason Boche
This is an update of the default FSX KEGE airport.
Enhancements include:
-Runway 7/25 lengthened to current, displaced threshold and markings added
-Blast pads added
-Updated taxiways to current
-PAPI lights moved to right/north side of runway 25
-Updated LOC frequency for runway 25 to 109.75
-Moved and added additional LOC antennea to the west end of runway 7
-Tower moved and model replaced
-Realistic terminal parking spots 1-10
-Asphalt and concrete aprons added/updated, ground lighting updated
-Asphalt, concrete, and gravel roads added
-Many bulidings updated
-All applicable runway signs updated
-Added airport, civilian, and construction vehicles
-Airport perimeter fencing updated
-Runway demolition fencing added
-National Guard helipads added
-GA refueling moved to the north end of the field
Please provide any feedback and suggestions to me at the email address listed
in the readme.txt. Thank you.
Acknowledgements:
Airport Design Editor (ADE -Freeware) - Jon Masterson.........http://www.scruffyduck.org.uk/
This also has a download centre for many other ADE files.
Please visit here for more information...........http://www.airportdesigneditor.co.uk
Any questions relating to ADE can be answered at www.fsdeveloper.com/forum......look
for Airport Design Editor author
Ray Smith for providing so many freeware airports and airport updates which
inspired me to give ADE a try.
Jason Boche
| Filename: | KEGE__Eagle_County_Regional__Eagle_Colorado_USA__F.zip |
| License: | Freeware |
| Added: | 30th November 2013, 10:42:48 |
| Downloads: | 1,477 |
| Author: | Jason Boche |
| Size: | 373.01 KB |
| Category: Flight Simulator X - Utilities | |
| Flight Simulator First Officer V2 |
|
Images related to this file:
File Description:
Flight Simulator First Officer is a generic virtual copilot that can be used with any aircraft. The primary
function of FSFO is to assist the Pilot In Command (PIC) to fly the aircraft safely while adhering to
Standard Operating Procedures (SOPs). This is accomplished via virtual checklist and sharing of cockpit
duties/responsibilities. Specifically, the First Officer reads the following configurable checklist:
- Pre-Flight
- Before Start
- After Start
- Before Takeoff
- In-Range
- After Landing
- Shutdown
After reading the checklist item, the Copilot will wait to ensure you (i.e. the pilot) have configured the
aircraft correctly before proceeding to the next item. Also, the Virtual copilot is capable of performing
the following actions:
1. Call Vspeeds based on your input
2. Raise/Lower the Landing Gear on Takeoff/Landing
3. Retract the Flaps
4. Extend the Flaps
5. Manage the taxi/landing/strobe lights
6. Tune the ILS frequencies
7. Call Climb Power based on your input
8. Reset Vertical Speed when the Aircraft is within 1000 ft of the programmed altitude
9. IAS warning (e.g. Aircraft is above 250 IAS while below 10000 ft)
10. GS Warnings (e.g. Aircraft is above 25 knots while taxing)
11. Resets the altimeter to standards when passing TA
12. Engage Heading Hold on Takeoff
13. Engage Altitude Hold on Takeoff
14. Reset Speed on Takeoff
15. Engage Speed Hold on Takeoff
16. Engages Rev Thrust on Landing
17. Ground Proximity Warning System (GPWS)
18. Over Speed Warning
19. Stall Warning
20. Bank Angle Warning
21. Vref monitoring
22. Set AutoBrakes
23. Loads Fuel/Payload
24. Random Payload/Pax generator
25. Plus much more!
Share checklist and report bugs here: http://flightsimaddons.proboards.com/index.cgi#general
| Filename: | Flight_Simulator_First_Officer_V2.zip |
| License: | Freeware, limited distribution |
| Added: | 21st December 2013, 21:58:46 |
| Downloads: | 3,238 |
| Author: | Matthew King |
| Size: | 60.63 MB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Piaggio P-166DL3 SEM Patrol Version |
|
File Description:
Thanks to Andrew Spring of www.p166.com!!
The seventh of the coming P-166 aircraft series. I'm going to built the whole family of these graceful twins. The Piaggio P-166A is a light small twin. An Exotic two-engined prop that sold all over the world including America, UK, and Australia. The P-166DL3 is the actual production version of a plane that firt flew in 1957, now with turboprop engines, new avionics, increased fuel capacity, and completly new hydraulic and electric system. Its origin is traced Back to the Piaggio P-136, a light anphibian, which the P-166 keeps the wings, the engines and the tailplanes. The first P-166A flew in November 1957, and the DL3 is dated 1976. The APH version (Aero-PHotograammetric) was originally built featuring a flat bottom with opening holes for cameras and orher devices, planning to use the unit for logistic squads, that never formed. So the APH internal features were generally limited to Military high density transport, paratrooper transport, or Cargo. Units fitted with APH original projected photogrammetric capibilities are very rare. he SEM version can be esily identified by the big sonar under the nose, the FLIR under the left wing and a search light on the right wing. It' a maritime antismuggling patrol aircraft, and it's used by the italian Cost guard and "guardia Di Finanza (Finance Guard). The aircraft waits to be repalced by a new version, the P-166DP-1, with PT-6A engines.
This model is 740 Kbs with c.a. 21000 polygons in c.a.160 assemblies. Features Clickable Dynamic Photoreal VC with non-planar throttle quadrant. New here is the photoreal panel. Detailed internals.
| Filename: | Piaggio_P166DL3_SEM_Patrol_Version.zip |
| License: | Freeware |
| Added: | 19th May 2004, 15:22:01 |
| Downloads: | 7,228 |
| Author: | Mario Noriega |
| Size: | 7.41 MB |
| Category: Microsoft Flight Simulator (2020) - Aircraft Repaints, Textures and Modifications | |
| Goodyear FG-1D Corsair VF-17 #29 Lt Kepford |
|
Images related to this file:
File Description:
This folder contains a repaint for the FG-1D Corsair by Milviz, in the colors of F4U-1 BuNo 55995 of VF-17, the aircraft flown by Lt (jg) Ira C. Kepford, Bougainville, February 1944. Ira Cassius Kepford was born in Harvey, Illinois, on May 29, 1919, son of George Raymond and Emma McLaughlin Kepford. His family moved to Muskegon, Michigan, shortly after he was born. An all-around athlete at Muskegon High School from 1935-1937, he capped his prep career by being named an All-State back in his senior year. He enrolled at Northwestern University in 1938 to study for a dentistry career.
He enlisted in the U.S. Naval Reserve on August 18, 1941, and was honorably discharged on April 29, 1942, to accept appointment as Aviation Cadet, U.S.N.R. After flight training at the Naval Air Stations, Corpus Christi, Texas, and Miami, Florida, he became a Naval Aviator on November 5, 1942, and was commissioned Ensign, U.S.N.R., with date of rank October 16, 1942.
Detached from Naval Air Station, Miami, Florida, in December 1942, he served with Fighting Squadron 17 in the Pacific War Area until March 1944, where he became the U.S. Navy's leading ace, scoring a record 16 confirmed Japanese planes destroyed. That squadron won the Navy Unit Commendation and he was personally awarded the Navy Cross, a Gold Star in lieu of the second Navy Cross, the Silver Star Medal and the Distinguished Flying Cross.
From March until June he was attached to the Fleet Air, Alameda, Command, and the last six months of that year served with Fighting Squadron 84. In December 1944 he was transferred to the staff of Commander Fleet Air, West Coast, and remained in that assignment throughout the remaining period of hostilities. Repaint by Jan Kees Blom.
| Filename: | Goodyear_FG1D_Corsair_VF17_29_Lt_Kepford.zip |
| License: | Freeware |
| Added: | 4th April 2021, 15:38:23 |
| Downloads: | 63 |
| Author: | Jan Kees Blom |
| Size: | 41.83 MB |
| Category: Microsoft Flight Simulator (2020) - Utilities | |
| MSFS P3D FSX FS2004 Flight Analyzer Utility FsQC V6.19 |
|
File Description:
FSX Flight Analyzer Utility FsQC v7.20
Flight Data Recorder - with Logbook.
FOR: P3D, FSX(Steam) and FS2004
Now MSFS2020 also supported.
Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file)
What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use.
Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc.
This is all fully freeware.
Full manual at: www.fsqc.eu
Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport.
Flight analysis start recording at the moment when you begin taxiing.
It gives you huge information such as:
- takeoff- and landing-weight.
- takeoff- and landing-roll in m. and ft.
- separate fuel consumption in taxi, climb, cruise and descent.
- maximum banking in flight.
- which speed you using the flaps and gear.
- when autopilot on or off.
- vertical speed on touchdown.
- reverser set after landing.
- wich speed you cancel reverser.
- bouncing at landing.
- graphical landingchart with Touch&Go and Missed Approach.
- graphical Climb-, Descent- and Full- flightchart.
- and lots of more.
You can better look the example of the pdf document.
Requirements:
Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual)
Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed.
Note: requires paid activation for full use of the Flight Analyzer and Logbook.
Register and you have 1 month free.
Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen.
| Filename: | MSFS_P3D_FSX_FS2004_Flight_Analyzer_Utility_FsQC_V.zip |
| License: | Shareware, time limited |
| Added: | 13th November 2020, 00:56:40 |
| Downloads: | 236 |
| Author: | Evander Tholen |
| Size: | 5.54 MB |
| Category: Flight Simulator 2002 - AFCAD Files | |
| ScotFlight AFCADs and Flightplans V1.0 |
|
File Description:
AFCADs, flightplans and aircraft for the newly released ScotFlight commercial scenery by VisualFlight
The newly released ScotFlight scenery by Visual Flight (www.visualflight.co.uk) is a beautiful rendition of the Scottish landscape and landmarks. It contains many new airports which were not included in the default FS2002 and I have had the pleasure of beta testing it for the last 4 months or so.
My freeware add-on package is in 4 parts:
1) AFCAD files for all of the airfields and airports included in the ScotFlight scenery. This will allow the smaller airfields to appear on the FS2K2 GPS unit and all will be listed in the World/GOTO menu.
2) EditVoice files for the new airfields so you will hear the correct names on the radio. (optional)
3) General Aviation flightplans for all of the airports, which can be added using TTools v1.3.3 by Lee Swordy.
4) Scheduled airline flightplans for flights to/from Scottish airports and small islands. Including 99.9% COMPLETE UK flightplans for Eastern Airways and 15 (yes fifteen!) individual BAe Jetstream J41 models, courtesy of Tom Woods, to use as AI traffic on the Eastern Airways routes. Plus directions where to get other suitable aircraft for, ScotAirways, BA Loganair, EasyJet and Highland Airways. Many thanks to Tom for his hard work repainting all the registrations for the Eastern fleet!
PLEASE READ THE INSTALLATION INSTRUCTIONS CAREFULLY! Anyone with the AFCAD and TTools programs by Lee Swordy should have no problem installing these files but, it needs care and attention to get them right.
Special thanks to:
Lee Swordy (AFCAD and TTools)
Tom Woods (The Eastern Airways fleet)
Daniel Parrot (For a great Eastern ERJ135 and ScotAirways ATR42)
Mike Holland (GA Maker)
Lars Møllebjerg (EditVoice)
Iain Gallacher,Iain Murray and John Farrie of VisualFlight for their great scenery and approval of my add-on package.
| Filename: | ScotFlight_AFCADs_and_Flightplans_V10.zip |
| License: | Freeware, limited distribution |
| Added: | 14th March 2003, 16:29:06 |
| Downloads: | 1,042 |
| Author: | David (The Fid) Fidler |
| Size: | 4.94 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |