Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Prepar3D V1-4 - Scenery | |
| VEMR Dimapur Airport Nagaland |
|
File Description:
Dimapur Airport is located at Dimapur in the Indian state of Nagaland. The airport, built during World War II, is located at 3rd mile. It is the gateway and the only civil airport in the Northeast Indian state.
| Filename: | VEMR_Dimapur_Airport_Nagaland.zip |
| License: | Freeware |
| Added: | 22nd September 2018, 00:56:56 |
| Downloads: | 116 |
| Author: | Sachin Gnath |
| Size: | 10.09 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Mountain Air Embraer 170 |
|
Images related to this file:
File Description:
This is the Dreamwings v3 Embraer 170 repainted in Mountain Air VA colors. The panel included is the panel that came with the v3 aircraft, and was created by Ken Mitchell. The repaint was done by Dale Reitz.
| Filename: | Mountain_Air_Embraer_170.zip |
| License: | Freeware |
| Added: | 5th December 2010, 00:06:43 |
| Downloads: | 574 |
| Author: | Dreamwings (aircraft); Ken Mitchelll (panel); repaint by Dale Reitz |
| Size: | 5.64 MB |
| Category: Flight Simulator 2004 - Scenery | |
| LIMN Cameri, Italy (v2) - closed Army area Babini |
|
Images related to this file:
File Description:
This scenery is complementary to the Cameri_V2's main one. It has been revised with complete new ground that solves the previous flickering problems, built up mainly with existing objects and through Generic Building system.
Historical Infos: the 31th Armored Brigade 'Curtatone' that was born after the reorganization of the Italian Army on 21th October 1975 and was incorporated into the 131th Armored Division 'Centauro', part of the 3th Corpo d'Armata of Milan, that also regiment the Mechanized Brigades 'Goito' e 'Legnano'. It got his name in honour of the Curtatone's historical battle, fought on 29th May 1848, during the first independent war between the royal Italian army and the Austrian one. The 'Curtatone' Brigade was placed with all their units in Piemonte area, as Novara, Vercelli and Bellinzago Novarese (this scenery place). On the November 1st 1986, the Curtatone Brigade was dissolved following the cleaning of the divisional level, and in its place the 31th Armored Brigade 'Centauro' was created.
Contents: several buildings by Generic Building system, few others by existing objects, one GMax custom made; military vehicles inside the area, as trucks, jeeps, cars and an armored cars patrol; lights on patrol zone and all over the boundaries; entrance gates by GMax, boundary by fences for the complete areas, connecting with the airport one; several trees all over the scenery. You can find separate further Cameri complementary scenery as airport Museum
| Filename: | LIMN_Cameri_Italy_v2__closed_Army_area_Babini.zip |
| License: | Freeware |
| Added: | 20th October 2011, 00:24:43 |
| Downloads: | 1,699 |
| Author: | Aldo Della Vedova, Daniele Lanfranchi |
| Size: | 4.46 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Graskop Airfield, South Africa |
|
Images related to this file:
File Description:
Graskop Airfield does not appear in the default FS2004, neither is the town included which is a pity as the airfield lies right on the edge of a gorge where bungee jumping and even a Gorge-lift (elevator) or a slide across the gorge can be enjoyed by the adrenaline junkies. Added to this, the airfield (and town of Graskop) is merely 10km from the world famous God's Window (also featured in the film, "The Gods must be Crazy").
This package will add a custom (Gmax & Sketchup) made Graskop Airfield, Mpumalanga, South Africa with photoreal textures and ground textures. The included Landclass file will also add the town.
The small airfield has been recreated with custom true to life models and photoreal textures. While being a very small airfield with only one hangar and a large antenna tower, the importance of the airfield far outweighs its size. The airfield plays a vital role in the fight against wildfires as there are water bombers based at the airfield during critical times. In real life the runway is quite challenging, being sloped quite significantly and very narrow, with a one-way-in one-way-out landing and takeoff procedure. Due to the limits within flightsim, the slope could not be replicated but all the other challenges are there.
The asphalt runway is aligned 15/33 and only 800m long by 8.5m wide and sits at an elevation of 4 854ft.
| Filename: | Graskop_Airfield_South_Africa.zip |
| License: | Freeware, limited distribution |
| Added: | 3rd September 2021, 00:55:30 |
| Downloads: | 161 |
| Author: | Kobus van Wyk & Morne van Wyk |
| Size: | 4.13 MB |
| Category: Flight Simulator X - Scenery | |
| CVN68_Carrier_North Sea_V1 |
|
Images related to this file:
File Description:
This scenery is based on the great CVN 68 Nimitz carrier model from Javier Fernandez.
The scenery shall replace my current CVN 75 scenery in the North Sea.
The scenery includes the following scenery elements, objects and dynamic traffic:
The carrier CVN 68 Nimitz and a lot of stuff on deck, 2 flying Helicopters over the Carrier,
4 Navy-Destroyers escorting the Carrier, 2 moving Destroyer based on a "Boats Traffic Plan
which are traveling around the group, 1 moving Tanker,a Oilrig about 30 nm northwest from the Carrier with a landable Platform !!
Seven F-18 Hornets as AI traffic, three F-18 Hornets based on recorded flights.
For the re-play of the start and landing traffic, the tool FSRecorder is required. The tool is part of this scenery package.
The carrier is built up as an airport with the code " CV68 ".
For installation and more info see the documentation inside the zip file.
For full carrier operation (catapul/cable catch) you need one of the two tools: RCBCO-30.zip, or ArrCab26.zip both available at the AVSIM lib.
CREDIT goes to :Javier Fernandez for his super great carrier model and to
Matthias Neusinger for his excellent FSRecorder tool.
| Filename: | CVN68_Carrier_North_Sea_V1.zip |
| License: | Freeware |
| Added: | 2nd June 2010, 01:37:06 |
| Downloads: | 2,919 |
| Author: | Dietmar Loleit |
| Size: | 32.58 MB |
| Category: Flight Simulator 2004 - Scenery | |
| EGVL - RAF Little Rissington - Gloucestershire, England |
|
Images related to this file:
File Description:
Representative scenery of RAF Little Rissington in Gloucestershire.
RAF Little Rissington (ICAO: EGVL) is an RAF aerodrome and former RAF station in Gloucestershire, England. It was once home to the Central Flying School, the Vintage Pair and the Red Arrows.
Built during the 1930s, the station was opened in 1938 and closed in 1994. The married-quarters and main technical site were sold in 1996 (the former becoming the village of Upper Rissington), but the aerodrome has been retained by the Ministry of Defence and remains active along with the southern technical sites, under the operational control of No.2 Flying Training School at RAFC Cranwell.
It is now home to 637 Volunteer Gliding Squadron as the primary military unit, who provide elementary flying training for Combined Cadet Force and Air Training Corps cadets. The airfield is also used by the forces as a relief landing ground, training area and parachute dropping area. In previous years, the Royal Air Force estate has been used as a film set, including The Avengers, part of the ice chase in Die Another Day, and the Thunderbirds film.
This scenery has been made using various scenery libraries, mainly from MAIW. Full listing in the docs.
| Filename: | EGVL__RAF_Little_Rissington__Gloucestershire_Engla.zip |
| License: | Freeware, limited distribution |
| Added: | 28th July 2014, 09:17:31 |
| Downloads: | 1,059 |
| Author: | Brian Clarke, Daryl Payne, Stewart Pearson |
| Size: | 448.92 KB |
| Category: Prepar3D V1-4 - Scenery | |
| Arecibo Observatory, Puerto Rico N18.20.39 W66.45.09 |
|
Images related to this file:
File Description:
Arecibo Observatory, Puerto Rico N18.20.39 W66.45.09 also known as the National Astronomy and Ionosphere Center,
National Center for Astronomy and the Ionosphere), is located about 15 km south-southwest of Arecibo, island of Puerto Rico.
It operates through Cornell University under a cooperative agreement with the National Science Foundation (a US government agency). NAIC refers more specifically to the organization that directs both the observatory and the associated laboratories
and the offices of Cornell University. The observatory is equipped with a radio telescope consisting of a 305 meter diameter
single-aperture antenna, the largest in the world up to the entry into service, in September 2016, of the 500 meter FAST radio telescope, located in the province of Guizhou. in China (soon to be realized).
It is mainly used for three large research areas: radio astronomy, atmospheric physics (using both the radio telescope and the observatory Lidar function) and the radar observation of objects in the solar system.
The telescope received further international recognition in 1999, when it began collecting data for the SETI project.Important VFR point for approaching airport of Rafael Hernandez TJBQ and airport Eugenio Maria De Hostos TJMZ.
Within the downloaded package you will find readme files for scenery installation. Good fly VFR. Pasquale Marrulli.
| Filename: | Arecibo_Observatory_Puerto_Rico_N182039___W664509.zip |
| License: | Freeware |
| Added: | 19th December 2017, 00:35:59 |
| Downloads: | 278 |
| Author: | Pasquale Marrulli |
| Size: | 1.15 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FS2004/FSX/P3D Project OpenSky V4 Japan Airlines JA8089 Boeing 747-446 |
|
Images related to this file:
File Description:
(TEXTURES ONLY)
(ONLY TESTED IN FSX: STEAM EDITION)
So I made a slight mistake in my last add-on (The Northwest Orient Cargo 747-200SF one) where I provided the resources required for advanced animations to be enabled in the POSKY 747 from Rikoooo, since in they default they did not include it. In there, I accidentally added the wrong "Contact Points" line that causes the 2 inner main landing gears to be slightly tilted when on the ground. I fixed it here. To apply the fix, just copy and paste the contact lines inside the aircraft.cfg file, that's it.
I originally supposed to be making 1 single livery for this exact aircraft, which is the 2002 Colors wearing the "Thank you for 41 Years" Sticker, but then went into a rabbit hole and found about the small Yokoso! Japan Sticker in the 2000s, the "BIG express" Decal in the 90s, and also the "Nippon Love Goal" Sticker. So I just had to do it.
I also improved the windows by using the windows from the CLS 747 Paint Kit, and re-arranged them.
Instructions and more information are included in the readme file.
| Filename: | FS2004FSXP3D_Project_OpenSky_V4_Japan_Airlines_JA8.zip |
| License: | Freeware |
| Added: | 19th March 2026, 14:09:48 |
| Downloads: | 66 |
| Author: | Ryubunao |
| Size: | 409.76 MB |
| Category: Civil Flight Simulators - Looking Glass Flight Unlimited 3 | |
| FU3 JoyKey.CFG for MS Sidewinder Precision Pro Joystick v3 |
|
File Description:
This file is for Flight Unlimited III using MS Sidewinder Precision Pro joystick only. I believe you can adapt it to any joystick, but I have no way of testing this.
JoyKeys_v3 corrects the trim function so that you DON'T have to "tap" the trim buttons to trim the aircraft. Just press and hold as it should be. Thanks Allan Dawson for the tip.
JoyKeys_v2 added the air brakes function to the reverser fuction already active on button 7. The reverser only works while the aircraft is on the ground. The air brakes work in the air and on the ground if the plane you have selected is equipped. These fuctions ONLY work with JETS. This file will assign the most common flight control functions to your joystick buttons for MS Sidewinder Precision Pro Joystick. These are my preferences. You can change them around at your discretion. All the documentation is in the readme from the FU3 patch. You can try this file... if you don't like it, delete it. All will be as before.
| Filename: | FU3_JoyKeyCFG_for_MS_Sidewinder_Precision_Pro_Joys.zip |
| License: | Freeware |
| Added: | 27th October 2002, 14:59:38 |
| Downloads: | 715 |
| Author: | Earl Buice |
| Size: | 2.12 KB |
| Category: X-Plane - Original Aircraft | |
| F4U Corsair |
|
File Description:
F4U Corsair for x-plane 6.4 to 6.6 - With its huge propeller (13'-4" diameter) and 2000 + HP engine it requires a lot of skill to just get this bird into the air. The torque on the plane is so high that a fair amount of left stick is required to keep the plane from rolling on takeoff. To handle all of this horsepower and keep the landing gear as short as possible the solution was to "crank" the wing giving the corsair its unique appearance. Visibility during takeoff and landings is terrible due to the long nose. Carrier landings have to be made by turning into the landing alignment. The plane is decorated in the skin of 86 where "Pappy" Boyington of the Black Sheep squadron was photographed before his last mission. In the Pacific pilots did not fly any specific plane as they did in the European theater but flew whatever was ready to go. If you look very closely you older simmers may recognize Robert Conrad who played Pappy Boyington in the TV series about the Black Sheep.
| Filename: | F4U_Corsair.zip |
| License: | Freeware, limited distribution |
| Added: | 27th March 2003, 01:22:40 |
| Downloads: | 1,301 |
| Author: | Robert App |
| Size: | 484.09 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |