Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator 2004 - AFCAD Files | |
| Leeds Bradford |
|
File Description:
An AFCAD2 file for the UK2000 Leeds Bradford Airport. Built from scratch, using the latest charts, this AFCAD2 compliments the addon scenery perfectly. This file gives you the current real life taxiway names and gate numbers at this airport. Airlines are allocated to the gates and all gates are used. This file gives you 40 usable parking positions at this airport, comprising 17 gates and 23 GA ramps (including a ramp for the Multiflight BBJ). GA parking is located near the multiflight hangars and also at the compass base area. This file has been fully tested with no problems found. Screenshots Included. Requires the payware 'UK2000 Part 7' or 'UK2000 Leeds' package by G. Summons available at http://www.uk2000scenery.com - this file is not compatible with the default FS2004 airport.
| Filename: | Leeds_Bradford.zip |
| License: | Freeware |
| Added: | 12th February 2005, 03:12:19 |
| Downloads: | 827 |
| Author: | Lee Brompton |
| Size: | 226.91 KB |
| Category: Flight Simulator X - AFCAD Files | |
| S77 Magee Airstrip |
|
File Description:
This airstrip lies in the Coeur D'Alene national forest region right in the mountains, but FSX has it badly misplaced, right in the middle of a mountain, so you have the horrible looking cliffs on each side and front and back too, whereas the real airstrip is in a valley alongside and actually looks like a very nice spot to make a landing. I redid the airfield with ADE and also did the landclass for the valley to improve the overall appearance, using google earth as a reference.
I also added a small taxiway and parking, with hold short nodes, these are not part of the real world strip, but if you want AI planes to fly in and out of these strips then you need those features, otherwise the AI will just vanish.
| Filename: | S77_Magee_Airstrip.zip |
| License: | Freeware |
| Added: | 25th September 2010, 02:20:46 |
| Downloads: | 221 |
| Author: | Kim Gowney |
| Size: | 78.63 KB |
| Category: Flight Simulator X - Scenery | |
| RNAS Anthorn / HMS Nuthatch 1950's - Cumbria, UK |
|
File Description:
This scenery is a representation of RNAS Anthorn (HMS Nuthatch) after runway and taxiway upgrades completed in 1948. It is not 100% accurate and no claim is being made that it is.
The scenery was made using ADE and is intended for use in FSX along with Horizon GenX VFR scenery but should work ok in Basic FSX.
This is the third version and is an update of "rnas_anthorn__1950s.zip". The second version was incomplete when i uploaded it (apologies).
Changes are fairly minor and are limited to textures and a few building additions. ZipDive! for Images...
Requires "RAF Buildings" by Ted Andrews - "MBC Studios Object Library for FSX" - "UKVFR Add ons scenery". Also requires Heli Traffic 2009" for Helo AI to be displayed but not necessary for scenery to display.
| Filename: | RNAS_Anthorn__HMS_Nuthatch_1950s__Cumbria_UK.zip |
| License: | Freeware |
| Added: | 8th April 2015, 22:02:28 |
| Downloads: | 465 |
| Author: | Mark John Byers |
| Size: | 174.74 MB |
| Category: Prepar3D V1-4 - Scenery | |
| LTFE - Milas Bodrum Airport - Turkey |
|
Images related to this file:
File Description:
LTFE - Accurate positioning according to the latest charts, google map coordinates and the Navigraph runway coordinates data.
Upon planning a flight from Istanbul to Bodrum, I realized that the airport has been developed with the addition of the international terminal, and the conversion of the old taxiway A into a runway (10R - 28L), and thus decided to quickly make this update.
Milas–Bodrum Airport (IATA: BJV, ICAO: LTFE) is an international airport that serves the Turkish towns of Bodrum and Milas. The airport is situated 36 km northeast of the town of Bodrum, and 16 km south of Milas.
The airport is surrounded by beautiful scenery of hills, with a steep approach of 3.90 degrees due to the surrounding terrain.
Please read the included README file for the simple install instructions.
| Filename: | LTFE__Milas_Bodrum_Airport__Turkey.zip |
| License: | Freeware, limited distribution |
| Added: | 5th July 2017, 17:46:12 |
| Downloads: | 767 |
| Author: | Ahmed Abdessalam |
| Size: | 945.88 KB |
| Category: Prepar3D V1-4 - Scenery | |
| Mitiga International Airport HLLM P3DV4 |
|
File Description:
This Addon for P3D V4, Currently the most realistic and best addon for MITIGA airport.
Changes:
- APT position aligned.
- Correct Taxiway designators.
- Corrected stands and thier positions.
Info about the airport:
The airport has a diverse international history and has been known by a variety of names. It was originally built in 1923 as an Italian air force base called aeroporto militare di Mellaha. It became a German air base during World War II. The airbase was captured by the British 8th Army in January 1943 and transferred to the control of the US Army Air Forces, who called it Mellaha AAF until 1945, when they renamed it Wheelus Air Base for a US airman killed that year. American use continued until the 1969 Libyan coup d'état.
[email protected]
| Filename: | Mitiga_International_Airport____HLLM_P3DV4.zip |
| License: | Freeware |
| Added: | 12th February 2019, 15:47:52 |
| Downloads: | 869 |
| Author: | Hamza Aswaid |
| Size: | 58.32 MB |
| Category: Flight Simulator X - Panels | |
| Boeing 767 |
|
File Description:
FSX Boeing B767 Panel. This comes from an old FS98 panel by Eric Ernst which is one of the best jobs I have seen, even better than many so-called "realistic" panels for later FS releases. Since I greatly missed this panel, then I have reworked it for FSX. All gauges react to panel lights and avionics buses, making it great to flight at night. Also features no-smoking/fasten-seat belts signs, plus tape sliding radar altimeter, regulable seat position and animated yoke. Last but not least, I have included the whole gauges source code under GPL (gauge programmers will love this!). Gauges programmed with an eye towards frame rate. This new version features reworked HSI (arc/rose), reworked autobrake and gauge switches sound. By Alessandro Antonini, author of Super Flight Planner. Older FS2004 version is still available on avsim.com and cpinf.com
| Filename: | Boeing_767.zip |
| License: | Freeware |
| Added: | 9th September 2007, 19:06:47 |
| Downloads: | 19,083 |
| Author: | Alessandro Antonini |
| Size: | 1.02 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Chateau Airfield NZ22, & Chateau Hotel Village, Mount Ruapehu, New Zealand. |
|
File Description:
Welcome to the Chateau Airfield, the home of Mountain Air. The airfield is located on the foothills
of Togariro National Park's, Mount Ruapehu in the central North Island of New Zealand.
This scenery includes not only the airfield, but the Chateau Hotel and Village halfway up the mountain.
The scenery also features some custom buildings and signs (textures included).
For those that like to arrive for their ski-ing holday in style, there is a helipad (NZ20, ficticious), right
beside the Chateau Hotel, or alternatively, you can follow the road opposite the airfield, which leads directly
up to the Chateau Hotel and Village. Requires some EZ Scenery Object sets (see INSTALL instructions for details). Special thanks to Mike Andrews (creator2003) for giving his kind permission to use his custom Chateau Hotel building in this scenery.
*Requires some EZ Scenery Object sets.*
| Filename: | Chateau_Airfield_NZ22__Chateau_Hotel_Village_Mount.zip |
| License: | Freeware, limited distribution |
| Added: | 5th December 2008, 15:29:38 |
| Downloads: | 1,456 |
| Author: | Lawrie Roache |
| Size: | 2.98 MB |
| Category: Flight Simulator 2004 - Scenery | |
| EGPE - Inverness (Dalcross) v2 |
|
File Description:
This is only an enhancement of the default scenery to make it look a little bit more realistic than the plain stock airport. I have altered/excluded the majority of the default stock buildings to position them as close as possible to the real world buildings, just to add a little something to the very drab default airport. I have also added ground objects and vehicles, and modified the aprons. The main runway on the stock airport was 06/24, but these days is 05/23 and comes complete with ILS for both ends as per real world, and this enhancement replicates that. I have also added taxiways signs, and windsocks.
THIS IS A FULL UPDATE TO MY EARLIER UPLOAD WHICH FIXES A FEW ISSUES, SO PLEASE DELETE EARLIER VERSION. (OR SIMPLY OVERWRITE THE FILE IN YOUR SCENERY FOLDER!)
| Filename: | EGPE__Inverness_Dalcross_v2.zip |
| License: | Freeware |
| Added: | 20th October 2011, 15:11:30 |
| Downloads: | 1,269 |
| Author: | Chris Horsfield |
| Size: | 223.12 KB |
| Category: Prepar3D V1-4 - Scenery | |
| WMKK - Kuala Lumpur Intl Airport, Malaysia |
|
File Description:
This is Ray Smith's 'FSX_wmkk_rs' file. Ray has given me permission to update this file and make it available for Prepar3Dv4. This file has not been tested in previous versions of Prepar. Runway 15/33 added with ILS and transitions also included for it, KLIA2 terminal included with the Main terminal and Satellite A terminal completely rebuilt, assigned parking as per their website with extra parking, five gates added for the A380, the old Low cost carrier terminal (LCCT) now the East cargo apron, lighted helipad with a start location, taxiways and taxi signs updated to the latest charts, drainage canals added, extra fuel trucks, support vehicle roads rebuilt, fuel tank farm and many other scenery improvements, airport views are from inside the new control tower west (when in tower view) please view the readme before installation.
| Filename: | WMKK__Kuala_Lumpur_Intl_Airport_Malaysia.zip |
| License: | Freeware |
| Added: | 2nd November 2017, 19:58:38 |
| Downloads: | 21,634 |
| Author: | Robert Catherall |
| Size: | 2.07 MB |
| Category: Prepar3D V1-4 - Scenery | |
| YSSY - Kingsford Smith Intl Airport - Sydney, Australia |
|
File Description:
This is and update of Ray Smith's 'yssy_rs_fsx.zip' file and has been modified with his permission for Prepar3Dv2/v3. This airport replaces the stock Prepar3D airport with two optional files: one file with the Crosswind runway 7/25 activated where all 3 runways will be used for takeoff/landing and one file as the default runway operation: The International Terminal has been redesigned and now includes night lighting, assigned parking as per their website for T2 & T3, six gates added for the A380, taxiways and taxi signs updated to the latest charts, Marsh St and Bridge added including Airport Drive and Link Rd, extra fuel trucks, support vehicle roads rebuilt, lighted helipad with the area buildings and many other scenery improvements, airport views are from inside the control tower (when in tower view) please view the readme before installation.
| Filename: | YSSY__Kingsford_Smith_Intl_Airport__Sydney_Austral.zip |
| License: | Freeware |
| Added: | 21st June 2016, 08:15:57 |
| Downloads: | 19,278 |
| Author: | Robert Catherall |
| Size: | 2.43 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |