Category: Flight Simulator 2004 - Gauges
3rd Hand: Auto gear up

File Description:
FS2004 Gauge: 3rd Hand- Auto gear up. This gauge can lend an extra hand during takeoff by automatically raising the landing gear. A "gear up" delay from 1 to 30 seconds is entered into the gauge. After takeoff, the power button begins a flashing sequence that indicates the delay count is in progress. At the end of the count the gear lever is shifted to the up position, the landing gear raises, and the gauge turns itself off. Small size allows convenient mounting on any panel. Give yourself a hand. By Glenn Copeland

Filename:	3rd_Hand_Auto_gear_up.zip
License:	Freeware
Added:	31st January 2006, 15:26:29
Downloads:	3,849
Author:	Glenn Copeland
Size:	139.32 KB

Category: Flight Simulator 2004 - Gauges
ODO - A Takeoff/Landing Run Measuring Tool (Odometer)

File Description:
A gauge for practicing pilots or for scenery designers. This gauge will measure takeoff/landing distance with or without obstacles. (adjustable) For scenery designers it can measure linearly for placing objects, validating etc.

Filename:	ODO__A_TakeoffLanding_Run_Measuring_Tool_Odometer.zip
License:	Freeware, limited distribution
Added:	28th May 2005, 16:47:49
Downloads:	1,069
Author:	Roman Stoviak
Size:	243.15 KB

Category: Flight Simulator X - Miscellaneous Files
Takeoff/Climb engine smoke for Coolsky Super 80 & Super 80 Professional

File Description:
Takeoff/Climb engine smoke for the Coolsky Super 80 and Super 80 Professional. Effects and gauge files included, along with seperate instructions for each aircraft. Smoke is emitted during takeoff and climb, and to a lesser extent during reverse thrust deployment on landing.

Filename:	TakeoffClimb_engine_smoke_for_Coolsky_Super_80__Su.zip
License:	Freeware
Added:	7th December 2008, 18:00:38
Downloads:	1,027
Author:	Carl Hudson / Teraphic Design
Size:	318.81 KB

Category: Flight Simulator 2004 - Gauges
Landing Speed Gauge

File Description:
This XML gauge installs as a pull-down, activated by shift+num where num depends on how many such pull-downs you have in the aircraft. You activate it during the flight before landing. You can move it or make it dissappear after activation. During flight it shows these speeds continuously in digital form. When you land the aircraft, it will show the indicated airspeed at landing and the vertical speed (when you make it appear). The values are frozen so you can jot them down. Pause the aircraft during roll-out and jot down the values. They may go to zero if the aircraft stops. It resets automatically when you take off. It also has been used by people with FSX with no problems.

Filename:	Landing_Speed_Gauge.zip
License:	Freeware
Added:	11th March 2007, 11:37:53
Downloads:	1,617
Author:	Tom Goodrick
Size:	3.57 KB

Category: Flight Simulator 2004 - Miscellaneous Files
Flight 1 ATR72-500 Checklist + Takeoff and landing data calculation

File Description:
A document which makes realistic takeoff and landing preparations for the amazing Flight One ATR72-500 possible. Easy to follow steps will guide you through all necessary steps to calculate weights, bug settings and speeds. If you want to do realistic flight planning for this airplane, you simply need this. Also included: A better checklist for the wonderful Flight One ATR72-500 than other available ones. Included are 6 various designs (1 black and white, 5 colorful ones) of the checklist. Adobe Acrobat needed to open the included files!

Filename:	Flight_1_ATR72500_Checklist__Takeoff_and_landing_d.zip
License:	Freeware, limited distribution
Added:	7th July 2005, 20:03:59
Downloads:	21,039
Author:	Peter Cernuska
Size:	2.42 MB

Category: Flight Simulator 2004 - Gauges
VREF_A320

File Description:
VREF_A320 is a gauge that allowing to have the reference speed during takeoff and landing OF YOUR AIRBUS A320. This FS2004 gauge displays the Vspeeds (V1,Vr,V2,f,s,o), and landing reference speeds (Vs, Vls, Vref, Vapp)with full flaps configuration. Click on the icon at the ground and in base of the aircraft's weight you will see the TakeOff Vspeeds that you can insert in your FMC. Click on the icon in flight and in base of the aircraft's weight you will see the Landing reference Vspeeds that you can insert in your FMC. The Reference speeds are only calculated for your Airbusa A320.

Filename:	VREF_A320.zip
License:	Freeware
Added:	14th January 2010, 00:23:16
Downloads:	853
Author:	Carlo Chiappisi
Size:	1.27 MB

Category: Flight Simulator 2004 - Gauges
4thHand: Landing gear computer

File Description:
FS2004 Gauge: 4thHand- This landing gear computer will automatically raise and lower retractable gear. It has analog adjustments to tailor both gear-up and gear-down functions to the needs of various aircraft. Once set to the preferences of the pilot, 4thHand cycles through the takeoff and landing phases without further attention. It will remains active for an entire FS session and continue to do its job regardless of the number of takeoff/landing cycles. A push-to-test diode display keeps the pilot informed on which mode the computer is in. Panel or separate window installation with 4thHand icon gauge. By Glenn Copeland

Filename:	4thHand_Landing_gear_computer.zip
License:	Freeware
Added:	10th April 2006, 18:14:43
Downloads:	4,285
Author:	Glenn Copeland
Size:	132.78 KB

Category: Flight Simulator 2004 - Gauges
Check Gear Gauge

File Description:
FS2004 Gauge- Check Gear Lamp. This is a generic gauge for all types of aircraft. It will issue two alerts; the first is a orange Caution to CHECK GEAR. If wheels are not extended and the aircraft continues with the landing approach, the second alert will then activate. It is a red Warning to CHECK GEAR. Lamps have Push-To-Test function. After takeoff, gauge will automatically enter a Standby mode and will signal that the gear position will be monitored during the next approach and landing.

Filename:	Check_Gear_Gauge.zip
License:	Freeware
Added:	19th February 2006, 06:10:42
Downloads:	2,322
Author:	Glenn Copeland
Size:	123.78 KB

Category: Flight Simulator 2004 - Gauges
Runway Roll Gauge v2.0

File Description:
Collects and displays a number of takeoff and landing roll parameters, including ground roll, obstacle length, nominal runway length and touchdown vertical speed, all in metric or US measure. Easy to use one button ARM operation, just like in v1.0. The gauge disarms automatically on take off, and when you slow to taxi speed on landing. This is a bitmap gauge which can be installed in FS2004 (FS9) or FS2002 aircraft. (1000+ downloads of v1.0)

Filename:	Runway_Roll_Gauge_v20.zip
License:	Freeware, limited distribution
Added:	17th June 2005, 23:23:51
Downloads:	3,604
Author:	Orest Skrypuch
Size:	99.63 KB

Category: Flight Simulator 2004 - Gauges
VTOL/Hover gauge for Fairey Rotodyne

File Description:
This freeware gauge adds new VTOL & Hover features to Kazunori Ito's Rotodyne. Besides true vertical takeoff&landing, it allows you to fly forward, backward, sideways and turn, while in a hover. This solution is based on overriding the normal FS flightdynamics while in a hover; in short, it's a VTOL&Hover FDE coded in a gauge. Special thanks to Doug Dawson, who created a gauge that provides for overriding FS2004 variables from an XML gauge. Requires FSUIPC (registered or unregistered, NOT included). The README includes extensive installation and flying instructions. By Rob Barendregt.

Filename:	VTOLHover_gauge_for_Fairey_Rotodyne.zip
License:	Freeware, limited distribution
Added:	6th June 2007, 23:46:14
Downloads:	928
Author:	Rob Barendregt
Size:	45.28 KB