Where Flight Simulation Enthusiasts Gather from Around the World!
| Category: X-Plane - Original Aircraft | |
| A1 Spec. SL-1 |
|
File Description:
The Sealiner 1 A1 Special is a small amphibian jet, capable of landing both on land and water as well as other tough terrain, This iarcraft boasts 6 compact low bypass jet engines, The plane also has a nice and simple cockpit design, so simple this is a perfect plane for any first time pilot. Not only is it fast and user friendly but it is safe with a huge chute on it, it can slow this plane down to landing speed in seconds. Unlike the VTOL aircraft I built before this plane is much smaller and this is reflected in the amount of payload it can carry, but there is a good reason for this. This airplane was designed to service small islands (mainly in the south pacific) where before a boat would have had to been taken if one decided to leave, so with the SL-1 them and 20 other people can fly commerical airline style almost anywhere! In the future look for another engine to be added.
| Filename: | A1_Spec_SL1.zip |
| License: | Freeware, limited distribution |
| Added: | 25th April 2004, 01:57:41 |
| Downloads: | 568 |
| Author: | Sam Hoy |
| Size: | 48.1 KB |
| Category: Flight Simulator 2004 - Miscellaneous Files | |
| Active ILS - KIAH v2.0 |
|
File Description:
UPDATED KIAH see the readme file -- By design KIAH is now another Airport that features advanced ATC control. As most know initiating the ILS at certain airports for AI Traffic is not a function at this time when using AFCAD2. If you add a new ILS runway to an airport such as KIAH (8L/26R) only the user aircraft can use this runway when visibility falls below 3 miles. ATC will no longer use this runway for AI Traffic because FS9 sees it as a visual runway. This will cause ATC to vector your AI Traffic back to 8/26 (old numbers) 8R/26L (new numbers) which is also a Terminal Departure Runway. All 5 runways for KIAH are now simultaneously active for departure and arrival. There are many additional options added to version 2.0 so follow the instructions in the README and just sit back (or fly) and plane spot either VMC or IMC for a very active airport. *** SimFlyers Scenery AFCAD2 and special ILS bgl also included ***
| Filename: | Active_ILS__KIAH_v20.zip |
| License: | Freeware, limited distribution |
| Added: | 26th August 2004, 02:23:19 |
| Downloads: | 2,720 |
| Author: | Jim Vile |
| Size: | 81.21 KB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Germanwings Airbus A319-112 'D-AKNI' |
|
File Description:
iFDG is proud to present the Airbus A319. The aircraft model includes most of the standard features including animated control surfaces, wingviews, flaps, full lighting configuration, highly detailed, reflective textures, and dynamic shine. This aircraft is made by iFDG (international Flightsim Design Group),
For more information visit our homepage at http://ifdg.net.
Model: Albaro Villegas and Ric Barker.
FDE: Eugene Schneider.
Master textures: Ben Jones.
Testing: The iFDG Beta Team.
Germanwings Repaint By: Jesse Sik. Painted in the current scheme of Germanwings (D-AKNI).
| Filename: | Germanwings_Airbus_A319112_DAKNI.zip |
| License: | Freeware, limited distribution |
| Added: | 20th February 2005, 17:12:55 |
| Downloads: | 4,126 |
| Author: | Jesse Sik / iFDG |
| Size: | 5.43 MB |
| Category: Flight Simulator 2004 - Scenery Design | |
| API Manager |
|
File Description:
API macros are old technology as far as FS scenery design is concerned. The new approach in FS2004 and beyond is quite different. It seems possible that scenery files using macros will not be supported in the next version of FS. Nevertheless there are many scenery designers who still use macros. I am one and I have a large collection of macros. I wanted a way to manage and categorize these macros. I also wanted to be sure that I could credit authors correctly when I use the results of their efforts. I wanted a way to keep information about object footprint and scale and I wanted to know ahead of time if I had missing textures for an object. Hence API Manager.
Please be aware that this is a first release and there are likely to be things wrong. There are also some areas of the program which could be more user friendly. Please note that API Manager only works with api macros
Requires dotNET framework version 2 from Microsoft. Support is available from www.scruffyduck.plus.com
| Filename: | API_Manager.zip |
| License: | Freeware, limited distribution |
| Added: | 3rd December 2005, 21:11:45 |
| Downloads: | 2,112 |
| Author: | Jon Masterson |
| Size: | 530.72 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Frazier Lake Airpark (1C9) California Scenery |
|
File Description:
This is a scenery upgrade for Frazier Lake, California (1C9). This is part Eight of a series of small airstrip and minor airfield scenery enhancements which are based on real world data from Google Earth. The scenery mainly reflects the appearance of the airpark from directly above. If you are familiar with the place when on the ground, due to the limited number of buildings available it probably looks quite different. There is now however, a water strip for float planes which was missing from the default. It is proper FS9 water so you may land on it. Also, a few images from the net show that the ground varies from green grass to bare earth so I have made four .bgl files for the base texture. Note, I am using Flight1 Ground Environment; the default fields will look different. You must have rwy12 and EZ scenery libraries installed for the buildings to show. Both libraries of objects are free. EZ Library is available at http://www.abacuspub.com/pub/AbacusEZLibraries.exe. Rwy12 and additional EZ Custom libraries from Avsim. Search under Scenery design.
| Filename: | Frazier_Lake_Airpark_1C9_California_Scenery.zip |
| License: | Freeware |
| Added: | 31st March 2006, 01:00:25 |
| Downloads: | 501 |
| Author: | Kim Gowney |
| Size: | 400.27 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Funny Farm (4CA2) Brentwood, California Scenery |
|
File Description:
This is a scenery upgrade for Funny Farm Airport, Brentwood, California (4CA2) (Why Funny Farm?) This is part Nine of a series of small airstrip and minor airfield scenery enhancements which are based on real world data from Google Earth. The scenery mainly reflects the appearance of the airpark from directly above, so if you are familiar with the place then on the ground it probably looks quite different, due to the limited number of buildings available. This scenery includes the Private lake and dwellings to the southwest of the airstrip proper plus extensive landclass alterations to make the small paddocks in the same area. This is a tough place to land neatly in anything past a C172 in calm weather; the runway is only 20 feet wide! Built using EZ_Scenery, Lee Swordy's AFCAD and SBuilder. You must have rwy12 and EZ scenery libraries installed for the buildings to show. Both libraries of objects are free: EZ Library is available from http://www.abacuspub.com/pub/AbacusEZLibraries.exe and rwy12 and additional EZ Custom libraries from Avsim. Search under Scenery design.
| Filename: | Funny_Farm_4CA2_Brentwood_California_Scenery.zip |
| License: | Freeware |
| Added: | 1st April 2006, 23:42:42 |
| Downloads: | 547 |
| Author: | Kim Gowney |
| Size: | 359.43 KB |
| Category: Miscellaneous Files - Demos from Commercial Vendors | |
| MCR 01 ultralight |
|
File Description:
The MCR Sportster is a side by side two-seater airplane with incredible performance and capability. Fast and agile, the VLA was specially designed to reach top speed while providing the most enjoyable experience to pilots
The MCR Sportster is a very high performance aircraft, that can cruise as fast as 300 km/h with only a 100 hp engine, at very low cost.
Thanks to the highest level of technology available, and very light material, the Sportster has a very efficient direct control system that guarantees the same satisfaction as flying a fighter jet.
The MCR Sportster can be equipped with a choice of different power plants, but may also be fitted with other options such as :
Ballistic Recovery System parachute
Extended range wing tanks.
Toe operated Hydraulic brakes
The MCR Sportster is available in kit form in respect with the CNSK regulation (specific kit airworthiness certificate) or in the "experimental" category depending on the registration country.
Models, panel, sound, textures, gauges and animations by afs-design Author: A.Meyer.
| Filename: | MCR_01_ultralight.zip |
| License: | Commercial demo |
| Added: | 22nd June 2007, 02:44:03 |
| Downloads: | 2,151 |
| Author: | Andreas Meyer |
| Size: | 13.2 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Boeing B-17G 'Little Patches' |
|
File Description:
This is a repaint (textures only) for the Donationware B-17G Late from FighterTown Design Group. You can get it here for a great price!! www.donationware.net
Thank you FDG for providing this great plane!!
Special thanks go to Jarink, who is a repainter in IL-2/PF. Jarink was kind enough to send me his layered photoshop files of the Noseart that I used for these repaints. I also used his repaints as a guide for my repaints.
This texture represents "Little Patches" one of the B-17G Flying Fortresses of the 91st Bomb Group, 8th Air Force. The 91th BG, one of the more famous groups in the Eighth Air Force. "The Ragged Irregulars" were based at Bassingbourn, England.
"Little Patches" The name "Little Patches" was acquired after the aircraft's first combat mission with Lt William Major's crew when Frankfurt flak put many splinters through the ship. The damage was primarily cosmetic but the skin required numerous small aluminium patches prompting Lt Major to name the ship.
| Filename: | Boeing_B17G_Little_Patches.zip |
| License: | Freeware |
| Added: | 29th August 2006, 22:08:42 |
| Downloads: | 146 |
| Author: | Brian Hill, FDG |
| Size: | 4.5 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Rubys Raiders Boeing B-17G |
|
File Description:
This is a repaint (textures only) for the Donationware B-17G Late from FighterTown Design Group. You can get it here for a great price!! www.donationware.net
Thank you FDG for providing this great plane!!
Special thanks go to Jarink, who is a repainter in IL-2/PF. Jarink was kind enough to send me his layered photoshop files of the Noseart that I used for these repaints. I also used his repaints as a guide for my repaints.
This texture represents "Ruby's Raiders" one of the B-17G Flying Fortresses of the 385th Bomb Group, 8th Air Force.The B-17G started seeing action with the 385th in November, 1943 and continued until the end of the war. The Checkerboard group markings on the tail were adopted in February, 1945.
"Ruby's Raiders" was named after Cpl Ruby Newell, a WAAC serving in the UK. She was the winner of a WAAC beauty contest and her likeness was painted on the plane by Cpl Ploss of the 385th. Assigned to the 550th Squadron. This aircraft returned to the USA.
| Filename: | Rubys_Raiders_Boeing_B17G.zip |
| License: | Freeware |
| Added: | 30th August 2006, 02:42:51 |
| Downloads: | 144 |
| Author: | Brian Hill, FDG |
| Size: | 4.37 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Spanish army and air force textures for aerospatiale superpuma |
|
File Description:
Spanish textures for the Eurocopter AS-332C1 Super Puma. Compatible with FS2002 and FS 2004.
Original helicopter model made by Dirk Fassbender [email protected].
Panel design and flight dynamics by Nick Karatzides [email protected] or [email protected].
Super puma serves in the Spanish Ejército de Tierra (land forces) and in the Spanish Air Force. Four paintschemes are included in this pack: normal low visibility grey for the Spanish Airforce 802 y 803 squadrons, the same scheme with ISAF markings (Afghanistan international troops, Herat base), and green and camo schemes for the FAMET (Fuerzas Aeromóviles del Ejército de Tierra).
You need to have the model with the panel and flight dynamics from avsim (available as as-332c1_haf_v1).
Just drop the folders in the texture folder and overwrite the aircraft config file. Remember to make a
backup copy of your previous aircraft file.
This is freeware. It is strictly forbidden the use of the model or textures as payware, and also to post it
in FSplanet.
All suggestion are welcome.
Alberto García Lledó [email protected]
| Filename: | Spanish_army_and_air_force_textures_for_aerospatia.zip |
| License: | Freeware |
| Added: | 27th September 2007, 17:42:58 |
| Downloads: | 675 |
| Author: | Alberto García Lledó |
| Size: | 4.11 MB |