Where Flight Simulation Enthusiasts Gather from Around the World!
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Delta Airlines Boeing B767 Interior |
|
Images related to this file:
File Description:
These are partially photo-realistic cabin compartment textures for your Captain Sim 767-300. This includes economy seating as well as the business compartment,based Delta Airlines Boeing 737, 757, and 767 IFE style cabins. Made from request. Requires the Captain Sim 767-300 Base pack. Tested for the 767-300. Read the read-me for installation.
| Filename: | Delta_Airlines_Boeing_B767_Interior.zip |
| License: | Freeware |
| Added: | 5th April 2011, 23:49:03 |
| Downloads: | 2,226 |
| Author: | Nick Bauer- Texture base: Captain Sim |
| Size: | 3.5 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Jetblue "NYPD" Airbus A320 |
|
Images related to this file:
File Description:
*REQUIRES PA320 MODEL*
Included is the new JETBLUE A320 "NYPD" texture for the PA320 Model.
I have tested in P3D but should work in FSX.
I have included both the winglet and sharklet textures.
Feel free to reach out with any questions.
[email protected]
I have also included a Alt belly with jetblue on the bottom..something different..
| Filename: | Jetblue_NYPD_Airbus_A320.zip |
| License: | Freeware |
| Added: | 24th May 2017, 04:29:57 |
| Downloads: | 297 |
| Author: | PA320 Model, Texture by Michael Ullman |
| Size: | 13.88 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Turkish Airlines NC Avro RJ70/RJ100 |
|
Images related to this file:
File Description:
These are two Turkish Airlines repaints for the QualityWings Ultimate 146 Collection Avro RJ70 and RJ100 models in their new livery. Only the tail is included and you'll need to install the Turkish Airlines repaints from the QualityWings website (www.qwsim.com) in order to use the updated tail texture! By Sebastian Szucs
| Filename: | Turkish_Airlines_NC_Avro_RJ70RJ100.zip |
| License: | Freeware, limited distribution |
| Added: | 24th September 2012, 19:31:20 |
| Downloads: | 480 |
| Author: | Sebastian Szucs (only the tail texture) |
| Size: | 4.64 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Philippine Airlines Hama Towing Car |
|
File Description:
This is the repaint of the default "hama" towing car in Philippine Airlines livery. You can get the default "hama" towing car model at:"http://f1.aaacafe.ne.jp/~rjnnhama/craft.htm ".. It is also recommended that you download the default "hama" towing car panel.. Highly recommended for use with the Philippine Sceneries made by the PFSG especially the RPLL scenery.
| Filename: | Philippine_Airlines_Hama_Towing_Car.zip |
| License: | Freeware |
| Added: | 6th June 2004, 17:13:00 |
| Downloads: | 730 |
| Author: | Lauro Daniel G. Malapira, PAL texture |
| Size: | 92.86 KB |
| Category: Flight Simulator X - Scenery | |
| Yeu island - LFEY |
|
Images related to this file:
File Description:
The island of Yeu (LFEY) is located in the west of France, in the south-west of Nantes. Its main runway is located on the wild coast, near the great lighthouse.
It is made up of :
- A new mesh based ASTER compiled in LOD11 and a very local mesh for the airport, compiled in LOD13 to get a good compatibility with the specific payware meshes.
- Photorealistic texture at 0.5 m/pixel based on aerial photography.
- The airfield and runway. The runway is flat, allowing to preserve the AI traffic. The grass strip is modeled with its relief. There is therefore no AI traffic on the grass strip.
- The port of Port-Joinville and several notable buildings made with Gmax (churches, chapel, castle, fort, ruins, beacons, etc)
- Generic or custom objects created with Gmax (boats, buildings).
| Filename: | Yeu_island__LFEY.zip |
| License: | Freeware |
| Added: | 29th December 2012, 04:03:47 |
| Downloads: | 1,717 |
| Author: | marc guitteny |
| Size: | 217.78 MB |
| Category: Flight Simulator X - Scenery | |
| KBRT - RI Bong AFB |
|
Images related to this file:
File Description:
Richard I. Bong AFB, Brighton, Wis. Originally designed out in the 1950's as a NORAD Base with the 56th FIG assigned to cover the Milwaukee/Chicago region the Great Lakes. Later it was transferred to SAC as a B-47/KC-97 installations and the 4040th Air Base Squadron taking command of the base. Initial drainage and the runway were laid out and the runway was within 3 days of being poured when the project was cancelled and the base closed. The base later became the Richard Bong State Recreation Area west of Kenosha, Wis. on US-142. The layout of the runway can be seen by satellite. This is the first of two versions of this base, this has the B-47/KC-97 layout, the second (KBRT RI Bong-B-52) will be B-52/KC-135. Both are set-up for the NORAD unit (56th FIG) using F-101 Voodoo aircraft. Check readme for requirements.
| Filename: | KBRT__RI_Bong_AFB.zip |
| License: | Freeware |
| Added: | 24th October 2013, 20:06:04 |
| Downloads: | 623 |
| Author: | Larry Steinborn |
| Size: | 916.95 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Winchelsea Airport (8NJ0), NJ |
|
File Description:
Located 01 miles W of Port Republic, New Jersey, Winchelsea Airport is a private turf strip. Pay very, very close attention to the published length of this grass runway: 980'. This is in addition to 50ft tree obstacles at either end of the runway. Double-check your aircraft's takeoff and landing distances before visiting this airfield!! A strong headwind is suggested for operations out of this location. Also take note the traffic patterns vary for each runway. There are no transient services offered and the airport is not lit at night so daytime VFR use only is suggested. There is no hard surface runway so set your terrain mesh slider as high as you can for the best effect of landing on terrain.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Winchelsea_Airport_8NJ0_NJ.zip |
| License: | Freeware |
| Added: | 24th March 2011, 19:28:46 |
| Downloads: | 162 |
| Author: | Drew Sikora |
| Size: | 396.23 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Stoe Creek Farm Airport (7NJ2), NJ |
|
File Description:
Located 01 miles S of Canton, New Jersey, Stoe Creek Farm is a private turf field 1725' in length. The runway is largely clear of obstructions although on approach for Runway 05 you will deal with 20-30' trees a few hundred feet back from the threshold and there are transmission towers along the approach corridor to Runway 23 you should watch out for. The runway does have edge lighting, although the windsock is not lit at night and daytime VFR is still recommended. There are no services for transient craft at this airfield. Since you will be landing on terrain, it is recommended that your mesh complexity is set as high as possible.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Stoe_Creek_Farm_Airport_7NJ2_NJ.zip |
| License: | Freeware |
| Added: | 14th February 2011, 18:32:24 |
| Downloads: | 163 |
| Author: | Drew Sikora |
| Size: | 700.91 KB |
| Category: Flight Simulator 2002 - Scenery | |
| Madeira Nova Pista |
|
File Description:
Madeiras new runway 05/23
| Filename: | Madeira_Nova_Pista.zip |
| License: | Freeware |
| Added: | 6th March 2003, 22:44:00 |
| Downloads: | 2,347 |
| Author: | Alberto Isea |
| Size: | 11.77 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| AI Lockheed C-130J-30 Hercules |
|
File Description:
Low polygon version Lockheed C-130J-30 Hercules by Henry Tomkiewicz. Features animated landing gear, flaps, and props. Included models (with and without wing tanks) have 2993 and 2833 polygons (ACM) respectively, 10 levels of detail (LODs), and are suitable for AI use. Generic USAF gray texture included. See readme file for more information. Dedicated to all the men and women of the U. S. Armed Forces serving around the world. THANK YOU!!!
| Filename: | AI_Lockheed_C130J30_Hercules.zip |
| License: | Freeware, limited distribution |
| Added: | 21st March 2005, 21:27:32 |
| Downloads: | 2,418 |
| Author: | Henry Tomkiewicz |
| Size: | 599.77 KB |