Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Modification of the power table for the Continental IO-520-F Cessna CU206G Stationair 6 II de CARENADO. |
|
Images related to this file:
File Description:
New update of flight dynamics settings.
Corrected the indicated speed error (KIAS) vs the true speed (KTAS) according to the data suggested in the pilot's operating manual (POH).
In some cases the position of the center of gravity unladen weight is corrected for a better weight and balance of the airplane.
Actual direct references from Pilot Operations Manual (POH) for specific details, Power,
Nose or pitch position and weight and balance settings, airplane geometry, piston or turbine engine data,
propeller and everything that refers to references, also the real references of the manufacturers of sea engines whatever the specific case.
This model in particular, I am sure that the gauges have a difference error between what the indicator of
manifold pressure and actual airplane reading, similar case to the PA34 Seneca II, the RPM tachometer needle marked 2500 and the
Maus cursor on the tachometer said there were 2200 rpm.
In this modification of the Cessna CU206G Stationair 6 II there is still an error that could not be adjusted to what it says in manual
pilot operation (POH) because it is a gauge error and not an adjustment error in the .air file.
When the error is corrected it will be published together with a new and improved VC.
| Filename: | Modification_of_the_power_table_for_the_Continenta.zip |
| License: | Freeware |
| Added: | 15th April 2020, 18:48:28 |
| Downloads: | 147 |
| Author: | Rafael Ledezma |
| Size: | 642.83 KB |
| Category: Flight Simulator X - Original Aircraft | |
| ARX-6 Roadrunner - Version 2 |
|
Images related to this file:
File Description:
The ARX-6 is a single-place Formula One pylon racing aircraft and is built to the specs of the International Formula 1 Air Racing association. Like all Formula One race planes, it is built around the Continental O-200. This is the same 100hp engine that barely powers a Cessna 150 to 100kts but on the small extremely lightweight and aerodynamic airframes of formula one racers the top aircraft can push 300mph. With very few instruments, and less than average ground handling, Formula One aircraft are very clean "no frills" machines that serve only one purpose - flying low, flying fast, and turning left. This all-new package created specifically for FSX includes 14 different schemes, custom sounds and panel. Aircraft and panel by Jason L. Terry. Sounds by Joseph Thompson. Additional schemes by Joshua B. Nyhus, Brady Duros and Mike Vivaldi
| Filename: | ARX6_Roadrunner__Version_2.zip |
| License: | Freeware |
| Added: | 30th August 2012, 08:36:51 |
| Downloads: | 887 |
| Author: | Jason L Terry, Mike Vivaldi, Josh Nyhus, Brady Duros, and Joseph Thompson |
| Size: | 38.36 MB |
| Category: Flight Simulator X - AFCAD Files | |
| PAOT - Wien Meml - Kotzebue, Alaska |
|
Images related to this file:
File Description:
This AFCAD of the airport Wien Meml - Kotzebue (PAOT), Alaska, fixes some issues for Scenery Solution's UTX Alaska users who want to use mesh and texture resolutions better than 38 m and 1 m, respectively. Unfortunately this discloses some additional problems with lagoons surrounding runway 09/27. Some of the ponds had been elevated over apron level, the fence Microsoft had drawn around the airport ran through (elevated) water and so on. Runway 27 has no direct connection to the mainland like it is realized by UTX and furthermore a lot of water polygons (including the lagoons) had 'forgotten' shore line vectors. Included corrections are: fixed main waterpolygons around the airport (according to Google Maps), fixed airport layout, including aprons, GA parking, additional airport buildings (default FSX objects), fixed Runway designators (now 09/27 resp. 18/36 instead of 08/26 and 17/37, Nov. 2013), added shoreline vectors (compatible to UTX textures) and some more.
Again, THIS AFCAD IS INTENDED FOR USERS OF UTX ALASKA ONLY and will likely look horrible in other environments as it partially amends missing features only.
| Filename: | PAOT__Wien_Meml__Kotzebue_Alaska.zip |
| License: | Freeware, limited distribution |
| Added: | 3rd February 2014, 14:30:10 |
| Downloads: | 409 |
| Author: | Axel Birsul |
| Size: | 1.09 MB |
| Category: Civil Flight Simulators - Looking Glass Flight Unlimited 3 | |
| Channel Islands (add on region) |
|
File Description:
This is a kit to build a new region for the Flight Unlimited 3 game. You have just to move the /channel folder into the /region folder of the game but
the /maps folder has just the blank water tiles and no texture maps due to copyright restrictions. You will have to download the maps by yourself using Maps2BGL and building the tiles using the included automated script. The region includes Jersey, Guernsey and Alderney with 3 prepared airports.
No building or trees are placed, this is left to you and I hope to see a package uploaded at avsim a bit later. To fly in the Channel region you must use a copy of FU3 without the Seattle region or temporarily move the /Seattle folder out of the game (not delete, just move !!!)
This kit also demonstrate how to build a minimal region (8x8 tiles, 131kmx131km. You must learn to handle Maps2BGL to finish the Channel region installation.
A fast Internet connection is needed to download the maps also.
Tool references:
maps2bgl.zip (DLID=120356)
maps2bgl__how_to_.zip (DLID=121257)
| Filename: | Channel_Islands_add_on_region.zip |
| License: | Freeware, limited distribution |
| Added: | 22nd May 2008, 11:31:31 |
| Downloads: | 257 |
| Author: | André Meystre |
| Size: | 22.91 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Anaktuvuk Pass PAKP in Alaska |
|
Images related to this file:
File Description:
Anaktuvuk Pass is a village located 85 miles north of Bettles and just north of the Brooks Range, in a valley that is a route between north and south. The inhabitants are mainly Numamiut, a section of the Inupiat that existed in history (and until today) away from the coastal food supply of fish etc. The current population is around 350. The airport has one gravel runway, aligned 1-19 with PAPI at both ends, and 5,500 feet long as there is no connection to the outside world other than the runway for all necessities that are not available on the tundra. There are two aprons, with light planes and passengers at the northern end of the runway and the Everts cargo flights unloading at the mid runway apron. A note here about my scenery making. There will not be many more to follow this as I am almost at the end of the photos I either took or found for scenery purposes, plus I expect to move on from FS9 at some point during next year.
| Filename: | Anaktuvuk_Pass_PAKP_in_Alaska.zip |
| License: | Freeware, limited distribution |
| Added: | 25th November 2019, 17:51:38 |
| Downloads: | 242 |
| Author: | Roger Wensley |
| Size: | 8.59 MB |
| Category: Prepar3D V1-4 - Scenery | |
| Piarco International Airport - TTPP V1.2 |
|
File Description:
TTPP v1.2 - In this version, problems with markings in tax lanes have been fixed. The textures of the taxi stands have also been redone. More vehicles and vegetation were included.
Piarco International Airport (IATA: POS, ICAO: TTPP) is an international airport serving the island of Trinidad and is one of two international airports in Trinidad and Tobago. The airport is located 30 km (19 mi) east of Downtown Port of Spain, located in the adjacent town of Piarco. It is the seventh busiest airport in the Caribbean in terms of passengers served[6] and third busiest in the English-speaking Caribbean, after Sangster International Airport and Lynden Pindling International Airport. The airport is also the primary hub and operating base for the country's national airline, as well as the Caribbean's largest airline, Caribbean Airlines.
Piarco International Airport has direct scheduled service to destinations in the United States, Canada, Central America, South America and Europe. It is also a significant transit hub for the Southern Caribbean and serves as the primary connection point for many passengers travelling from Guyana.
| Filename: | Piarco_International_Airport__TTPP_V12.zip |
| License: | Freeware |
| Added: | 4th February 2022, 03:49:10 |
| Downloads: | 559 |
| Author: | Eduardo Puelker |
| Size: | 53.65 MB |
| Category: Flight Simulator X - Scenery | |
| John F. Kennedy International Airport (KJFK) New York |
|
Images related to this file:
File Description:
This is an accurate and up-to-date version of JFK Intl Airport with two optional files and made only for FSX users, do not use in P3D: There is one version with the Crosswind runways activated and in full operation where all 4 runways will be used for takeoff/landing and one version as the default airport runway operation: assigned parking now updated as per their website including gates for the A380, runway 4L/22R now at its new length of 3682m, the new terminal extension updated for Terminal 4 concourse B, and allocated only for Delta connection, Terminal 5 and 8 have also been remodeled, taxiways and taxi signs updated to the latest charts, the freeway traffic that crosses taxiways A and B now ends before these taxiways, Autogen around the water edges of the airport removed, support vehicle roads rebuilt and many other scenery improvements and objects added, airport views are from the roof of the control tower (when in tower view) please view the readme before installation.
| Filename: | John_F_Kennedy_International_Airport_KJFK_New_York.zip |
| License: | Freeware, limited distribution |
| Added: | 4th May 2018, 04:47:55 |
| Downloads: | 53,445 |
| Author: | Ray Smith |
| Size: | 5.49 MB |
| Category: Flight Simulator X - Scenery | |
| KCOS - Colorado Springs Municipal Airport/Peterson AFB - Colorado Springs, CO |
|
File Description:
Following the tragic passing of Shelly Johnson, I was contacted by Dakota Smith (Smith Graphics) about
upgading Colorado Springs Municipal Airport for the VATSIM Fly-In on November 15, 2008 in Shelly's honor.
Dakota did the "afcad" for the airport, packing in as many parking spaces as possible to accomodate the
Fly-In attendees. He then sent the file to me and I replaced most of the default buildings and added many
more. I adjusted some aprons, added others, added some roads, and static scenery objects.
Please note that the "afcad" was designed for the Fly-In and does not provide accurate airline assignments,
military parking, etc. As stated above, Dakota packed in as many parking spaces as possible, and assigned
many gates to Continental, Shelly's favorite airline.
A second "afcad" will be released by Dakota Smith the day after the Fly-In that will have more realistic
parking.
| Filename: | KCOS__Colorado_Springs_Municipal_AirportPeterson_A.zip |
| License: | Freeware |
| Added: | 8th November 2008, 14:46:50 |
| Downloads: | 2,396 |
| Author: | Jim Cook and Dakota Smith |
| Size: | 29.23 KB |
| Category: Flight Simulator X - Missions | |
| The Most Dangerous Airports: Toncontin |
|
Images related to this file:
File Description:
I have created the next in, The Most Dangerous Airport Mission Series: namely Toncontin. The missions are real and hectic, both for you and the aircraft. The flight is a scheduled Continental Airlines flight. The Toncontin Intl is rated by some as the most dangerous airport, due to it's approach, it has a 180�° left bank, just before landing on runway 02. The airport is not so famous for this approach and numerous accidents have closed the airport in 2008 but it has been reopened after a serious upgrade.
The setting are as follows: Time and weather are set as Online Day Weather and Stormy FSX Day weaqther. Due to the runway 02 approach not being programmed into FSX, ignore the ATC vectoring and fly the approach indicated on the GPS and mission pointer. The approach is adapted from the real approach charts.
| Filename: | The_Most_Dangerous_Airports_Toncontin.zip |
| License: | Freeware |
| Added: | 24th February 2010, 05:10:45 |
| Downloads: | 2,187 |
| Author: | Robbie Albers |
| Size: | 15.9 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Fokker 100 Repaint Mega Pack Part One |
|
Images related to this file:
File Description:
This is a repaint pack for the Digital Aviation Fokker 100. I have included 44 repaints of airlines from all over the world. There are some fictional and some real repaints included, so you can fly with this aircraft everywhere! The following airlines are included: China Eastern, Skyways, Merpati Nusantara, Carpatair, Belleair, Air France by Regional, Dutch Antilles Express, Korean Air, Montenegro Airlines, Skywest, Spanair, South African Airways, ANA, Tunisair, Nigerian Eagle, Aerolineas Argentinas, Royal Jordanian, Fly Be, United, S7, TAME, PIA Pakistan International, Precision Air, Thai International Airlines, Alaska Air, Olympic Air, Delta, Air Baltic, TAM, Kenya Airways, Iberia, Lan, British Airways, Air Canada, Alitalia, Philippine Airlines, SAS, Lufthansa, Air Caraibes, Continental, UTair, Air China, Dragonair and Turkish Airlines!
IMPORTANT: This is part one of the repaint pack, you will need part two, in order to have all repaints: DA_Fokker100_repaintmegapack_part_TWO.zip
By Sebastian Szucs
| Filename: | Fokker_100_Repaint_Mega_Pack_Part_One.zip |
| License: | Freeware, limited distribution |
| Added: | 11th May 2010, 21:31:44 |
| Downloads: | 7,158 |
| Author: | Sebastian Szucs |
| Size: | 84.6 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |