Where Flight Simulation Enthusiasts Gather from Around the World!
| Category: Flight Simulator 2004 - Utilities | |
| Gau Cleaner 4.0 |
|
File Description:
Anytime you install a panel, a lot of .GAU files are copied into the GAUGES
directory of your Flight Simulator.
Then when you delete a panel, a consistent number of gauges still remains in
your hard disk.
GAU Cleaner will help you to remove these unused gauges.
It can find missing gauges too.
| Filename: | Gau_Cleaner_40.zip |
| License: | Shareware, time limited |
| Added: | 23rd December 2003, 00:14:09 |
| Downloads: | 6,926 |
| Author: | Nicola Marangon |
| Size: | 45.04 KB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Harbin Y-12 |
|
File Description:
Re-upload. Harbin Y-12
The Harbin-Y12 is a Chinese-made aircraft. It has twin turboprops, a crew of two and can carry up to 17 passengers. It is designed to operate from short airstrips.
This aircraft has been constructed using Gmax v1.2 and is designed for AI use. However it also flies well as a normal GA aircraft. The aircraft is constructed with as few polygons as possible and with a single texture file to ensure the absolute minimum impact on your framerates. There are two models included. The default has a three-bladed prop, and there is also a four-bladed prop model. Each has a total of 6 LOD models. There are three liveries included. A paintkit for this aircraft has been uploaded also.
| Filename: | Harbin_Y12.zip |
| License: | Freeware, limited distribution |
| Added: | 3rd June 2010, 03:26:50 |
| Downloads: | 22,793 |
| Author: | Mike Cronin |
| Size: | 384.52 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Emerald Lake |
|
File Description:
"Emerald Lake" (YEWA), Queensland, Australia.
Emerald Lake is the international headquarters and home base for EastWest Airlines VA and is situated 18 kilometres from Emerald. Emerald Lake is nestled on the foreshores of Lake Maraboon, Queensland's second largest lake. It is 265 km west of Rockhampton and 900km from Brisbane. The lake is a massive 15000 hectares surface area.
Emerald Lake consists of two ILS runways 13000’ & 6000’ a space-age international and domestic terminal cluster using 8 Skyways, super sized hangars to accommodate future super jets, a flying club, cargo division, RFDS Base and a fully manned tower, a water runway and amphibian base.
There is a resort, a marina, residential area (under construction) on the shores of the lake adjacent to the airport and connected by a road network.
| Filename: | Emerald_Lake.zip |
| License: | Freeware |
| Added: | 2nd January 2006, 21:31:42 |
| Downloads: | 1,544 |
| Author: | Gregg Kirkwood |
| Size: | 4.83 MB |
| Category: Flight Simulator X - Original Aircraft | |
| Germany UHT, EC-505 TIGER |
|
File Description:
The UHT (from Unterstützungshubschrauber Tiger; Ger. supporting helicopter Tiger) is a medium-weight multi-role fire support helicopter built for the Bundeswehr (German Army).The Tiger UHT is a multi-role fire support helicopter. The Trigat Fire and Forget missiles and/or the Hot missiles it carries offer anti-tank capability, while 68-mm rockets ensure air-to-ground fire support. A 12.7 mm air-to-air gun pod and air-to-air Stinger missiles can also be installed. The helicopter also features a mast-mounted sight with a second-generation IRCCD infrared channel and a TV channel, as well as a nose-mounted IRCCD control FLIR for the pilot. Countermeasures include radar/laser/missiles launch/missile approach warning receivers and decoy launchers.
This is a demo version purchase is required for full functionality
| Filename: | Germany_UHT_EC505_TIGER.zip |
| License: | Commercial demo |
| Added: | 2nd November 2008, 01:28:59 |
| Downloads: | 1,057 |
| Author: | Andreas Meyer |
| Size: | 3.79 MB |
| Category: Flight Simulator X - Utilities | |
| Flight Trip Chooser 2.0 FSX |
|
File Description:
Flight Trip Chooser 2.0 FSX is a new version of Flight Trip Chooser 1.0, the old version is obsolete and no longer needed.
Flight Trip Chooser 2.0 FSX is a simple tool to suggest you a departure airport by random and a selection of destination airports (all available FSX airports, more than 24.000) within a given and adjustable distance you can choose from. Detailed information about the airports (runway, map, charts, etc.) and the flight area (weather radar, map, GoogleMap, etc.) is available with just one click for every single airport.
NEW! In addition the user can pick a departure airport and define a range of distance to show available destinations around the departure airport.
You will need MSExcel to use this tool and a internet connection to get detailed information.
| Filename: | Flight_Trip_Chooser_20_FSX.zip |
| License: | Freeware |
| Added: | 14th February 2009, 11:57:41 |
| Downloads: | 2,311 |
| Author: | Gerhard Scheuerecker |
| Size: | 11.04 MB |
| Category: Flight Simulator X - Helicopters | |
| Bundeswehr (German Army), EC-505 TIGER UHT |
|
File Description:
--This file is a COMMERCIAL DEMO--
The UHT (from Unterstützungshubschrauber Tiger; Ger. supporting helicopter Tiger) is a medium-weight multi-role fire support helicopter built for the Bundeswehr (German Army).The Tiger UHT is a multi-role fire support helicopter. The Trigat Fire and Forget missiles and/or the Hot missiles it carries offer anti-tank capability, while 68-mm rockets ensure air-to-ground fire support. A 12.7 mm air-to-air gun pod and air-to-air Stinger missiles can also be installed. The helicopter also features a mast-mounted sight with a second-generation IRCCD infrared channel and a TV channel, as well as a nose-mounted IRCCD control FLIR for the pilot. Countermeasures include radar/laser/missiles launch/missile approach warning receivers and decoy launchers.
| Filename: | Bundeswehr_German_Army_EC505_TIGER_UHT.zip |
| License: | Commercial demo |
| Added: | 26th March 2009, 21:19:43 |
| Downloads: | 852 |
| Author: | Andreas Meyer |
| Size: | 3.79 MB |
| Category: Flight Simulator 2004 - Utilities | |
| Flight Trip Chooser 2.0 FS9 |
|
File Description:
Flight Trip Chooser 2.0 FS9 is a new version of Flight Trip Chooser 1.0, the old version is obsolete and no longer needed.
Flight Trip Chooser 2.0 FS9 is a simple tool to suggest you a departure airport by random and a selection of destination airports (all available FS9 airports, more than 23.000) within a given and adjustable distance you can choose from. Detailed information about the airports (runway, map, charts, etc.) and the flight area (weather radar, map, GoogleMap, etc.) is available with just one click for every single airport.
NEW! In addition the user can pick a departure airport and define a range of distance to show available destinations around the departure airport.
You will need MSExcel to use this tool and a internet connection to get detailed information.
| Filename: | Flight_Trip_Chooser_20_FS9.zip |
| License: | Freeware |
| Added: | 14th February 2009, 11:58:32 |
| Downloads: | 1,455 |
| Author: | Gerhard Scheuerecker |
| Size: | 10.49 MB |
| Category: Microsoft Flight Simulator (2020) - Utilities | |
| Flightplan Visualizer 1.22 |
|
Images related to this file:
File Description:
Flightplan Visualizer (FV) version 1.22. Copyright 2018-2022 by Pelle F. S. Liljendal ([email protected]), all rights reserved.
FV comes with 1599 pre-imported AI flightplans (of which +726 are BizJet flightplans, the rest are commercial, government and military). However you are able to import additional (AI) flightplans yourself. Once imported these (AI) flightplans can be visualized on a map-view, and the user will be able to search accross all these. Hence you can use the program as inspiration as to which routes to fly. E.g. you can search across all imported flightplans to find all flights in an A321 flying into/out from LDDU, or simply to look for all flights in a Boeing 747-8F.
Simply run the included installer to install the software. The program will be installed into "C:\Program Files (x86)\Flightplan Visualizer" and all datafiles will be installed into: "C:\Users\[UserName]\AppData\Roaming\FlightplanVisualizer". The program comes with a full manual explaining everything, and a 3 page quick manual to get you started. The first 3 times you run the program the quick manual will automatically open. The forum is hosted here: https://forum.aerosoft.com/index.php?/forum/919-flightplan-visualizer/
Version 1.22 Contains the following changes:
- I had initially added a feature to download AIG airline-logos, however a later change in AIG's server setup rendered this feature useless. In stead you can now specify the local folder holding AIG's airline logo's (if/when you are using AIG AIM on your computer for AI-traffic). If specified, airline-logo's will be obtained from this folder.
- On the same note, I had to remove the menu-item to download AIG flightplans, as this program no longer have directly access to the AIG servers. For the same reason the menu-item to access the index with flightplans (up to summer 2021) was re-enabled.
- In the past when opening the Airport-Info form it defaulted to show in-/out-going traffic for the selected flightplan or active leg-search only. Now there is a new setting where you can set it up to in stead default to showing all traffic in/out of the airport (the Airport-info form still contains a combobox where you maually can choose what to see).
- "Owned aircraft" was renamed into "Simulator-aircraft", as these are the (flyable) aircraft you have available within your simulator of choise.
- When choosing to use calculated flight-times in a leg-search, you can now specify a percentage-difference (between leg-time and calculated-time). Only when the difference between leg-time and calculated-time exceeds this specified value will the calculated time be used during leg-search (e.g. "only use calc-times if diff. exceeds 50%, otherwise use leg-times").
- Began using (aircraft) short-names many places where the program in the past used IATA/ICAO-code (e.g. when hovering the mouse over a route, or list of aircraft servicing specific airports when editing flightplans). Also added short-name columns to aircraft browser and when choosing favorites (these stil contains columns for IATA/ICAO-codes).
- Pressing the "Usage" button when editing/viewing an aircraft-type or right-clicking an aircraft-type in the browser and choosing "View usage-report..." from the context menu, you will be shown a report that inform you how that aircraft-type is used: which simulator-aircraft are based on that type, which owned aircraft that have been marked as substitute for that type, which airlines are using that type (as carrier/operator), and finally in which (active) flightplans that type is used.
- Items in airline-browser are now by default sorted by (airline) name, and the usage-column shows the size of the airline if its in use. If available a logo for the selected airline is displayed in the upper/right corner.
- Improved performance when searching for ICAO-codes in the airport-browser. Also improved priority of the default selected item, in cases when an airport had a 3 letter ICAO-code, and another was using the same 3 leters for its IATA code.
- When searching for ICAO/IATA-codes in the airline-browser, it will now prioritize non-defunct airlines, if multiple airlines share the same ICAO/IATA-code.
- When enabling/disabling flightplans, you can now select all BizJet flightplans (those prefixed with "Bz_"), all Military (prefixed with "Ml_") or all Goverment (prefixed with "Gv_").
- Individual FP sub-folders can now be setup to leave (not move) defunct- and/or obsolete FP, even if the settings to automatic move these to the disabled folder is set.
- Performing "Search legs" you can now filter on aircrafts you are allowed to fly via type-ratings ("Must be type-rated").
- Performing a substitute of a user-airline, that airline will remain selected (previously the list scrolled to the top, and selected the 1st item).
- Added new check-box to "Search legs" that can exclude round-trips (legs taking-off and landing at same airport).
- Airline/Aircraft-repaint -filter can now filter on size of airline (e.g. "size=major"). Size is determined from usage as carrier/operator in active flightplans. Airlines not in use by active flightplans are listed with a size of "unknown").
- Added GPS-conversion (deg deg,min,sec) to the conversion-form, as requested by a colleague. You can either manually enter lat/lon or look-up an airport to get it. There is both a primary lat/lon and a secondary, and the form will show the (GC)distance between these and the initial/final course.
- Added new "Max airport-distance" for airport-redirections. At the same time added new feature when importing/editing airports to permanent change an airport. If used, it is not saved/handled as a redirection (can't be restored) but rather as a perpament change.
- Reordered- and renamed some of the tab-pages in the Airport-info form.
- Reordered the length/distance-fields in the unit-conversion form.
- The Wind-calculator have been removed from the main-menu, in stead wind-calcuations can now be performed using the unit-conversion form. Also now the speed of the wind is always displayed as a positive value, and in stead the label will either say "Head-wind" or "Tail-wind".
- Added new "Country list" menu-item in the misc-menu. Will list all countries twice (sorted by names, and sorted by ISO3-codes).
- Showing airport-marker tool-tips on the main-map is now prioritized over showing route tool-tips.
- Added "Min take-off fuel ("MTFL") field to user-aircraft weight-fields. As of now its not set for any aircraft in the database, however it can be estimated as 60 minutes of flight at cruise.
- Moved several group-boxes of the settings-form to the 2nd tab-page, and added new fields for defalt simulator/logging-environment based on the File-prefix used when starting the program.
- Also now the header-names that was previous fixed to "Rank" and "Traffic-density" can be changed, so the selectable 6 values can be used for something entirely different, if anyone have the need for this. If/when changed, these new names are shown when editing an airport, or when performing a leg-search (as the leg-search can filter on these fields).
- MakeRunways (MkRwy) by Pete Dowson is challenged handling unicode in the scenery it scans/writes to XML. E.g. the Icelandic airport (BIFL) "Flúðir Airport" is exported by MkRwy as "Flúðir Airport". In this version FV will try to identify when this happens, and then it will fall back using the airport/city-names from the databases bundled with FV. This is not a perfect solution, but at least it improves the result.
- Various minor changes and tweaks to multiple forms (e.g. Unit conversion form can now be closed with ESC, renamed log-archives and so on).
- Fixed: If the main-form had an active flightplan filter when using the search-legs feature the flightplan combo-box still only contained the filtered context. Pressing the Clear button did not resolve the issue.
- Fixed: Since adding support for the AIGFP file-format, there could be flights departing from- and arriving at the same airport (e.g. helicopter flights). In previous versions the calculated flights-time would only consist of taxi-out/in times. In this version the flightplan leg-time will now also be uses for the calculated time, when the same airport is used both for departure and destination.
- Fixed: In some cases re-processing flightplans (resetting and performing redirection) could corrupt the flightplans and remove airport-data from the flightplans. This version will also try to add any missing airport-data to flightplans when re-processing them.
- Fixed: Selecting "only show favorites" in the Search aircraft-type form would filter out all aircraft (including those marked as favories).
- Fixed: In the leg-info form the fields to show times (Out, Off, On, In) were too narrow for multi-week flights, when showing the week-number (e.g. "TH7/14:37").
- Fixed: Issues when estimating cruise/taxi fuel-burn for user-aircraft, where in some cases some fields were not saved, and wrong calcuation if setup to show weight in Kg.
- Fixed: In some cases wrong TimeZone was used when calculating local time for OUT, OFF, ON, IN-times.
- Data: The airport redirection file ("UserAirportRedirect.xml") in the UserData folder have been updated to match the latest MSFS world update. However this new file is only installed by the installer if it does not already exists (in case you made your own changes), hence you need to delete this file manually prior to running the version 1.22 installer.
- Data: Quite a few airports in the airport-database were updated (had wrong names due to issues with unicode-letters). Also some additional airports were added.
- Data: The installer comes bundled with +300 airline-logos (optional install), and a separat package of +1400 airline-logos are avilable for download from AVSIM (in both cases these are encoded into a propriotary format using the ".CAL" extension).
- Data: Added the P2F (Passenger-to-Freighter) versions of the Airbus A320, A321 and A330. Also added the package freighter versions of CRJ100 and CRJ200.
- Data: Improved detection of Boeing 737-700/800 BCF/BDSF when importing flightplans utilizing these (passenger aircraft converted into freighters). Also improved a few other freighter detections.
- Data: Changed a few (aircraft) short-names to either shorten them a bit, or make them "more readable".
- Flightplans: All new/updated flightplans have been added to the installer, and all obsolete/defunct have been marked/removed. A total of 1599 active flightplans are bundled with the installer.
| Filename: | Flightplan_Visualizer_122.zip |
| License: | Freeware, limited distribution |
| Added: | 18th October 2022, 23:31:28 |
| Downloads: | 395 |
| Author: | Pelle Liljendal |
| Size: | 45.57 MB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Druine Turbulent |
|
File Description:
A 'generic' Turbulent, representing no particular aircraft, this is a relatively basic AF99 model, (no animations), dusted down and re-polished for FS2004, and fitted out with a custom set of xml gauges on an aluminium panel. This is definitely an aircraft to be sat in and flown, not examined in detail from the outside, the features just aren't there. An old favourite of mine, first designed "way back when" in A&AF for FS4, now dragged back out of the hanger and used as an ideal "lo & slo" aircraft with photographic VFR scenery and/or a good terrain package, the small panel allowing a much better view in flight than many other aircraft. With a cruise speed of 80kts you'll not be in a hurry to get anywhere, but with a landing speed of around 30kts and a take-off roll of "not a lot" you can operate into and out of any farmstrip. These slow speeds, combined with the relatively good visibility from the cockpit, also make this an ideal aircraft for "tailwheel conversion" ... great if you have problems landing the Extra 300 or possibly even the Cub.
| Filename: | Druine_Turbulent.zip |
| License: | Freeware, limited distribution |
| Added: | 29th May 2006, 12:37:45 |
| Downloads: | 829 |
| Author: | Chris Eve |
| Size: | 1.43 MB |
| Category: Flight Simulator X - Scenery | |
| MYXY - Duncan Town, Ragged Island Chain, Bahamas - Version 2 |
|
File Description:
The Ragged Island Chain consists of a string of small islands in the Bahamas. Only one island, Ragged Island, has a settlement on it which is known as Duncan Town. This FSX scenery improves the airstrip at Duncan Town and creates a new private airstrip on Nurse Cay. The airstrip at MYXY (Duncan Town) has been lengthened by 500 feet and widened by 25 feet. Six parking ramps now exist as well as a fuel pump and helipad. Additional taxiways have been added and lights for the runway, taxiways and apron. A small building has been added to serve as a combined terminal, control tower, and customs office. There is also a hangar to protect your plane from tropical storms. These improvements were necessary to accomodate the increased air traffic due to the new high rise tropical hotel, the Ragged Island Resort. There is also a lighthouse on the island and a cruise ship with helipad just off to the east. A large private yacht just to the north also has a helipad. You can watch dolphins swim at both of those locations - the helipads make great viewing spots. About 20 miles north of Ragged Island is Nurse Cay (MYXN). This is where my private airstrip and villa are located. The airstrip has a 2500 ft concrete runway and a parallel taxiway as well as a helipad. The runway, taxiways, and apron are all lit for night operations. The airstrip was built right on a marsh so wandering off the runway or taxiways could result in getting wet. You will find a variety of birds flying around at various locations throughout this scenery. A flight plan is also included for a dusk flight from Ragged Island (MYXY) to Nurse Cay (MYXN). So come on out to Ragged Island, because it's better in the Bahamas! This is version 2 and supercedes my original file - this version corrects the runway numbers at MYXN.
| Filename: | MYXY__Duncan_Town_Ragged_Island_Chain_Bahamas__Ver.zip |
| License: | Freeware |
| Added: | 24th August 2007, 15:55:49 |
| Downloads: | 2,408 |
| Author: | Mike Lanza |
| Size: | 13.43 KB |