Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - AFCAD Files | |
| ZSGS - Zhuhai Janwan Airport - Zhuhai, China |
|
File Description:
The Zhuhai Sanzao airport (ZGSD/ZUH, China), close to Macao, was built on request of someone who found it included in the FMC of PMDGs 737NGX, but missed in FSX. I used ADE and the Google based old version 2 of Plan-G (thanks to both authors) and some charts being available in the internet. However, it is equipped with standard buildings which are roughly adapted to the real dimensions well. Lighting, windsocks, taxisigns and moving jetways. Of course I added both ILS as well. There is a big exhibition apron on the airport which is modeled but blocked for AI traffic. You will see the lines of the taxiways nevertheless. The latest temporary chart (Nov 2012) shows a third apron which is not realised and I'm not planning to do so (obviously the whole site is still under construction).
As being built on a FSX island (which is now a peninsula) and default coast lines not fitting to the real position of the airport (Rwy05 was hanging in the water) I decided to compromise in a way that I corrected the area in the vicinity of the airport but respected the remaining part as it was in the default scenery. The attached pictures should give an impression even if I'm not using the pure default scenery. Therefore this little patch should be compatible to advanced mesh sceneries.
| Filename: | ZSGS___Zhuhai_Janwan_Airport__Zhuhai_China.zip |
| License: | Freeware |
| Added: | 2nd May 2013, 07:56:18 |
| Downloads: | 688 |
| Author: | Axel Birsul |
| Size: | 614.11 KB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Grumman Albatross version 2.1 |
|
Images related to this file:
File Description:
Grumman HU-16 Albatross 2.1
Greg Pepper, Michael Verlin
May 18, 2012
I am privileged to be honored with the custodianship of this model.
Greg Pepper is no longer with us. I wish to honor his memory and I've made a few modifcations to enhance this aircraft.
WHAT'S NEW FOR 2.1
The flight model is the most significant change. The flight model has been enhanced by the use of Jerry Beckwith's AirWrench.
The performance of the Albatross is now much closer to the parameters published for it. I've also adjusted the contact points for the hull.
Please make sure you adjust the fuel and payload before flying. This is a very heavy aircraft, and will be very sluggish if you attempt flight with full tanks and a full payload.
I've also added a few liveries, and modified several others. The colors and lettering of the U.S. Navy versions have been revised. The font the Navy uses is USN Long Beach. The paint colors are accurate now as well. You will also find new spin prop textures.
I've also slightly revised the original U.S. Air Force HU-16B and two of the U.S. Coast Guard liveries.
New for this release: U.S. Navy VXE6 UF-1L triphibian that served in the Antarctic, Chalk's G-111 and two new private liveries.
Michael Verlin
May 18, 2012
[email protected]
| Filename: | Grumman_Albatross_version_21.zip |
| License: | Freeware, limited distribution |
| Added: | 19th May 2012, 05:08:32 |
| Downloads: | 3,468 |
| Author: | Greg Pepper Michael Verlin |
| Size: | 88.13 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Global Airways Douglas C-54 |
|
Images related to this file:
File Description:
The repaint features Global Airways' N79000, an early production Douglas C-54 (c/n 3058) built at the Douglas factory at Santa Monica, CA, and delivered to the USAAF on February 8, 1943 as 41-37272. In 1946 the Civil Aviation Administration took her over as NC79000. Having been converted to DC-4 standard, she was bought on April 11, 1951 by Eastern Air Lines as N79000 '721'. In May 1955 she was sold and served many users such as Northwest, Transocean and World. In 1960 California Airmotive became the owner of the C-54. During September and October 1960 the C-54 was leased by Global Airways, a company based in Philadelphia, PA, from 1946 to around 1960. (founded by Simon Bolnick and Joseph Raphael; passenger charter operations included fishing and hunting charters to Canada.) In May 1961 the C-54 was sold as D-ADAM to Continentale in Germany. Already in December 1962 Continentale went bankrupt and the aircraft was stored in the open at Hamburg. In July 1963 Aviation Traders (Engineering) Ltd purchased the C-54 for conversion to Carvair car-ferry aircraft. As it turned out, the condition of the C-54 was extremely poor (corrosion on many places on the wing spars) so makeshift repairs were done before the aircraft was ferried to Stansted for its rebuild to Carvair G-ASKN.
Textures only. You will need Jens B. Kristensen's FSX Douglas DC-4 & C-54 (DC4_V30X.ZIP). Repaint by Maarten Brouwer.
| Filename: | Global_Airways_Douglas_C54.zip |
| License: | Freeware, limited distribution |
| Added: | 19th November 2012, 12:46:35 |
| Downloads: | 127 |
| Author: | Maarten Brouwer |
| Size: | 1.23 MB |
| Category: Prepar3D V1-4 - Aircraft Repaints, Textures and Modifications | |
| North American T-6 Harvard (F-BJBF) |
|
Images related to this file:
File Description:
This folder contains a repaint for the A2A North American T-6 Texan/Harvard in the colors of North American T-6G F-BJBF, 1970. Originally built as 41-33931 (c/n 88-14948), it went to the RAF as EX959. It was used by the 20 Service Flying Training School in Rhodesia from January 1943 onwards. After the war, it was transported back to the UK, where it was sold to the Belgian Air Force, where it became H-9. It flew from Brustem until 1959. The Belgian Air Force then sold it to Air France, with 14 other Harvards, for use at its flight school in Pontoise Cormeilles en Vexin, west of Paris. It flew with Air France until 1965, when it was sold to Mr Urbain of Cannes, who flew it in bare metal with a checkered rudder until 1971. This is the paintscheme depicted here. It then went to the UK, becoming G-AZJD. It remained based at Biggin Hill until 1984, when it went back to France as F-AZDU, being bought by Guy Robert, a former Mirage pilot who recieved his training in the '50's on a Harvard in Marocco. In 2001 it was sold to John Colors SL in Barcelona, but it retained its French registration of F-AZDU. It is still airworthy, based at Sabadell in Spain. Repaint by Jan Kees Blom, based on the paintkit by A2A.
| Filename: | North_American_T6_Harvard_FBJBF.zip |
| License: | Freeware |
| Added: | 27th July 2020, 21:30:04 |
| Downloads: | 43 |
| Author: | Jan Kees Blom |
| Size: | 24.19 MB |
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Global Airways Douglas C-54 |
|
Images related to this file:
File Description:
The repaint features Global Airways' N79000, an early production Douglas C-54 (c/n 3058) built at the Douglas factory at Santa Monica, CA, and delivered to the USAAF on February 8, 1943 as 41-37272. In 1946 the Civil Aviation Administration took her over as NC79000. Having been converted to DC-4 standard, she was bought on April 11, 1951 by Eastern Air Lines as N79000 '721'. In May 1955 she was sold and served many users such as Northwest, Transocean and World. In 1960 California Airmotive became the owner of the C-54. During September and October 1960 the C-54 was leased by Global Airways, a company based in Philadelphia, PA, from 1946 to around 1960. (founded by Simon Bolnick and Joseph Raphael; passenger charter operations included fishing and hunting charters to Canada.) In May 1961 the C-54 was sold as D-ADAM to Continentale in Germany. Already in December 1962 Continentale went bankrupt and the aircraft was stored in the open at Hamburg. In July 1963 Aviation Traders (Engineering) Ltd purchased the C-54 for conversion to Carvair car-ferry aircraft. As it turned out, the condition of the C-54 was extremely poor (corrosion on many places on the wing spars) so makeshift repairs were done before the aircraft was ferried to Stansted for its rebuild to Carvair G-ASKN.
Textures only. You will need Jens Kristensen's FS2004 Douglas DC-4 & C-54 (DC4_V30.ZIP). Repaint by Maarten Brouwer.
| Filename: | Global_Airways_Douglas_C54.zip |
| License: | Freeware, limited distribution |
| Added: | 19th November 2012, 12:47:37 |
| Downloads: | 142 |
| Author: | Maarten Brouwer |
| Size: | 2.23 MB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| RFS New improved and realistic Afcads for TNCM,TFFJ, and SABA/TNCS |
|
File Description:
Make the three FlyTampas airports even more realistic. These Files are for Flight simulator enthusiasts, who prefer realism. These Afcads are optimized for AI Traffic. FlyTampas FlyMarten is very realistic yet, but these files even optimize this very good scenery addon.
These files are improved afcads for the three FlyTampa FlyMarten airports St. Marten (TNCM), St. Barthélemy (TFFJ) and Saba (SABA/TNCS). They are on the basis of the three original afcads from Flytampa, but there are a few differences between the old and the new version: 1. AI Traffic does not make the u-turns in the grass, but they make the u-turns on the provided u-turn areas at the ends of the runways 9 in TNCM, 10 in TFFJ and 12 und 30 SABA. 2. Landing and Takeoff on runway 27 in TNCM and Takeoff on runway 28 in TFFJ is forbidden; it is not possible to prohibit landing, but allow takeoff. So I compound, that all flight movements in TNCM will be performed on RWY 9. 3. At all of the three airports tower frequencies replace AFT, e. g. "Saba Traffic". 4. In SABA and TFFJ I removed few gates, because the pushbacking aircrafts taxied into each other when using the old file. Important: These Files are functional only if FlyTampa-Marten is installed on your computer. There are also the original files in the backup folder.
RFS Real Flight Simulation
| Filename: | RFS_New_improved_and_realistic_Afcads_for_TNCMTFFJ.zip |
| License: | Freeware |
| Added: | 13th August 2008, 19:39:19 |
| Downloads: | 1,802 |
| Author: | Ernst Kamuschke |
| Size: | 1.8 MB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Airspeed AS.5 Courier |
|
File Description:
FSDS V3.0 Airspeed Courier.
Has reflective Textures, usual animations, 2D Panel using all default Gauges plus a VC.
The Airspeed AS.5 Courier was a British six-seat single-engined light aircraft that saw some use as an airliner. Production aircraft were built by Airspeed (1934) Limited at Portsmouth. It first flew on 10 April 1933 and was the first British type with a retractable undercarriage to go into production, with a total of 16 built.
The prototype Courier was designed by Hessell Tiltman (co-founder of Airspeed Limited) and was built in 1932 by Airspeed at York for an attempt by Sir Alan Cobham to carry out a non-stop flight to India, using airborne refuelling. Airspeed moved from York to Portsmouth before the Courier G-ABXN first flew on 10 April 1933. The Courier was a wooden low-winged cabin monoplane; it had a novel feature for the day of a retractable undercarriage. The prototype was powered by an Armstrong Siddeley Lynx engine. The prototype had two minor accidents, in April 1933 at Portsmouth and in June 1933 at RAF Martlesham Heath. The aircraft was repaired on both occasions.
After a year spent perfecting airborne refuelling, Alan Cobham took off from Portsmouth in the prototype Courier on an attempted flight to India on 24 September 1934, being refuelled from a Handley Page W.10 before making a forced landing at Malta due to a broken throttle.
| Filename: | Airspeed_AS5_Courier.zip |
| License: | Freeware |
| Added: | 16th April 2017, 08:48:20 |
| Downloads: | 412 |
| Author: | Julian Higgs |
| Size: | 10.09 MB |
| Category: Flight Simulator 2004 - Scenery | |
| PAKN - King Salmon - Alaska, US V1 |
|
Images related to this file:
File Description:
This is the final version, complete in itself and incorporating the two modifications posted separately. King Salmon is a town with a population of just under 400, on the north bank of the Naknek River and 15 miles from the sea. The airport is adjacent to the town and was originally an airforce base; the military hangars on the airport are still usable. The airport, with its long runway (11-29 and 8,500 feet with an ILS, and a second runway 18-36 and 4,000 feet) is a transportation hub for the area in general and in particular for the salmon industry. Along the Naknek River there are numerous canneries and there are also fishing lodges on the river and nearby lakes; to speed up transportation to the lodges there are float bases on the river to the south of the airport. King Salmon has three tiers of scheduled flights: Alaska Air direct from Anchorage in a 737 (passengers and cargo), PenAir (Saab turboprop) as part of their flights up and down the peninsula, and Grant Air serving nearby small towns. There are also PenAir flights, both scheduled and unscheduled, in smaller aircraft (Piper Navajo for instance) to smaller airports for the fishing season, plus cargo flights in larger aircraft by the lowest bidder (Everts and Northern). To complete the mix the AI includes a pair of F15s. The runways cross (see the airport diagram) so read the notes re long taxi routes. There is AI for PAKN, plus revised AI made for Dutch Harbor which includes flights by PenAir to King Salmon, plus revised parking for Dutch Harbor with new replacement bgls to cater for more flights. There is also AI for the float bases on the river; I have made two runways separated into two float bases for river AI, called King Salmon Floats and King Salmon River; more AI for these will be added when other scenery along the river is made. Just land according to the wind and taxi to whatever dock takes your fancy.
| Filename: | PAKN__King_Salmon__Alaska_US_V1.zip |
| License: | Freeware, limited distribution |
| Added: | 11th April 2015, 06:20:40 |
| Downloads: | 503 |
| Author: | Roger Wensley |
| Size: | 23.67 MB |
| Category: Flight Simulator 2004 - Scenery | |
| CYKF - Kitchener, Regional Muni of Waterloo - Ontario Canada |
|
Images related to this file:
File Description:
The town of Kitchener is in southern Ontario, 40 miles southwest of Toronto. The population is just over half a million, including the adjoining Cambridge and Waterloo which are known locally as the Tri Cities. The Kitchener name was adopted in 1916, replacing the former "City of Berlin".
The airport is on the northeastern side of the town, with the main runway aligned 08-26 and just over 7,000 feet of asphalt 150 feet wide, lit, with PAPI at both ends and approach lighting and ILS on 26. The second runway is aligned 14-32 and is 4,100 feet long, lit and with PAPI at both ends; right hand circuits for 32. The airport is being steadily enlarged and improved, with new hangars for rental, operators, and maintenance companies. The largest and most visible presence is the training operation located just off the southwest end of taxiway A, where there are 14 Cessna 172, 2 Cessna 152, 2 Piper Seminole, and others. These are represented in the AI. There are morning and evening scheduled flights by Westjet to Calgary and American Eagle to Chicago, also in the AI. To the southwest, past taxiway C, there is GA parking; request taxi to what is named here "southwest parking" where there are spaces on both grass and asphalt. To the southeast, along a taxiway off the southeast corner of the main apron, are mainly operators and maintenance facilities. This version of CYKF includes the new(ish) terminal, the first of the new central rental hangars alongside the new taxiway and access road, and the very new large hangar off taxiway C, but not the new airport services building (fire and snow clearance) that is off to the southeast of taxiway A, and not the new car park to the south of the airport access road. So an uncertain and possibly historically innacurate date, but with the correct taxiway lighting and signage, and building textures from photographs.
| Filename: | CYKF__Kitchener_Regional_Muni_of_Waterloo__Ontario.zip |
| License: | Freeware, limited distribution |
| Added: | 7th May 2016, 21:13:28 |
| Downloads: | 548 |
| Author: | Roger Wensley |
| Size: | 28.69 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FSX Canadian Airlines (Concept) Boeing 737-MAX10 |
|
Images related to this file:
File Description:
This is a repaint for the amazing TDS Boeing 737-MAX10. It includes the base model, high-quality textures, a VC, and custom ground service vehicles.
Canadian Airlines never flew the Boeing 737-MAX10, as by the time the company was absorbed by Air Canada in 1999 the aircraft did not exist. Canadian Airlines did fly a fleet of 77 737-200's and -300's. However, in our new universe, Canadian Airlines has taken delivery of one single Boeing 737-MAX10, available to fly any route of your choice. It flies under the registration C-FCDS and the tail number 731.
Livery Info
This is a concept livery created completely by me. I'd like to think if Canadian Airlines still existed, they would be thinking about rebranding into this wonderful, modern livery. It features Canada Goose on the tail and red and blue styling representing the mountains and sea; two of Canada's most stunning natural features. The engines are also splashed with some red, and the Canadian Airlines Chevron adorns the belly of the aircraft, as well as on the Sharklet wingtips.
MAX VC and Cockpit Info
This aircraft includes a VC updated to closer resemble the true-to-life MAX cockpit. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 including gauges by G. Munro. I have also modified the 2d panel. I increased the size of the PFD and MFD to better fill the panel. If you don't like this modification, you can search for the original panel included in the base model.
| Filename: | FSX_Canadian_Airlines_Concept_Boeing_737MAX10.zip |
| License: | Freeware, limited distribution |
| Added: | 26th April 2024, 13:36:31 |
| Downloads: | 148 |
| Author: | Julian Flight |
| Size: | 81.27 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |