Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator 2004 - Scenery | |
| Sydney CYQY in Nova Scotia Canada |
|
Images related to this file:
File Description:
Sydney is a maritime port on the east coast of Canada, on the eastern corner of Cape Breton Island. It was founded in 1785 and grew in size emormously from 1900 as a steel mill was founded that prospered along with local coal mines until 1950 or so. After that date and following the final closure of the mill in 2001 the population declined to the current 29,000 or so. The airport is 3 or 4 miles southwest and inland of a coastal urban area which stretches from New Waterford in the north through Lingan, Dominion, Reserve Mines, and Glace Bay, to Port Caledonia, and 5 miles east of the town of Sydney which is beside a sheltered deep water harbour area. This version is not from a fixed date as although I had video of some of the buildings from 2010 I inadvertently constructed part of the apron layout from 2018 information, and then decided to keep it like that either because I liked it or perhaps was too lazy to redo it. The terminal building and the garages to the east of the terminal are original and old, though renovated and maintained to a fairly good standard. The other buildings on the airport are "hangars" in the expected form, with steel frames, insulated cladding, and pitched roofs. The airport publicises it's ability to cater for all the needs of visiting aircraft, with a large FBO hanger just beside the terminal. There are (or were, before the virus came along) scheduled flights by Westjet, Air Canada Jazz, and Air North, which are included in the AI along with GA flights. The runways are 07-25 at 7,000 feet and with PAPI on 25 and ILS on 07, and 01-19 at 6,000 feet with PAPI on 01 and ILS on 19. You will see once the scenery is installed that there are two folders in Sydney CYQY called "Scenery summer" and "scenery winter". Editing the folder name down from "scenery summer" to just "scenery" results in FS9 loading the summer ground textures and parked planes etc. In February you would edit down the "scenery winter" folder to just "scenery" and the unused and unswept taxiways, runway, and aprons will be invisible under the snow, the open-topped cars will not be parked in the open, and privately-owned planes will be in the hangars. If FS9 decides that there is snow on the ground then you need the winter textures, if not then the summer textures. The winter textures are not the full-snowdrift-middle-of-Winter-gale type and are more like early or late winter. One thing you must NOT DO is to edit both folders down at the same time.
| Filename: | Sydney_CYQY_in_Nova_Scotia_Canada.zip |
| License: | Freeware, limited distribution |
| Added: | 22nd August 2020, 00:07:58 |
| Downloads: | 274 |
| Author: | Roger Wensley |
| Size: | 29.42 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Cyprus: Airfields plus landmarks and land class for all of Cyprus and AI |
|
Images related to this file:
File Description:
Cyprus, an island in the eastern Mediterranean. Without the benefit of Ultimate Terrain, which does not exist for Cyprus, the land class provided by FS9 stands out as hopelessly inadequate. I have added the extensive farmland and the larger towns and villages, plus the major roads. Four completely new airfields are included here, three in the north and one in the south. Ercan LCEN is in the north and functions as the airport for all of the north. It was recently closed for two years while a new terminal was built and the runway updated and an apron extended etc, and during that time Gecitkale LCGK functioned (barely) as the airport for the north. Gecitkale is now hardly used at all. The third northern airfield is Ilker Karter LCIK and this functions as the HQ base of the Turkish Army Corp in northern Cyprus. The last of the new airfields is Kingsfield LCRE, which is in the Sovereign Base area to the east of Larnaca and is now used for recreational purposes. Ercan is now undergoing further expansion with a new runway and a new terminal building and apron, so this scenery is for the period between 2010 to 2015. My set up of Cyprus already included a payware Larnaca by Aerosoft (now only 12 euros) plus a freeware Paphos, Nicosia, and Akrotiri; that was my starting point. Larnaca has been the major airport for Cyprus since the mid 1970's, with a huge tourist trade that peaks in the summer but which is year long (almost a million Brits visit every year, let alone the other nationalities). I have adapted this (gate sizes etc) to allow parking by a multitude of B737's and others. Nicosia is freeware (posted in 2010) and I have included modifications to reflect its now total disuse. Paphos is at the far western end of the island and freeware, and I have modified this to allow larger and military ai aircraft to function properly; the poster improved his first version to better cater for ai but I was unaware of this and I have stayed with my modifications. Akrotiri is freeware and includes a lot of library object input from MAIW. I have modified the parking somewhat and added further residential areas and munitions storage. The AI is based upon recorded take offs and landings in April, with some further additions in later months. At Ercan the visible gate numbers on the apron are as per real life, but the numbers within FS9 reflect the fact that planes are directed to gates at the centre of the terminal building and not at the far ends. Follow the pink line and obey ATC when it says taxi to gate number 2 even if it is visibly numbered 4.
| Filename: | Cyprus_Airfields_plus_landmarks_and_land_class_for.zip |
| License: | Freeware, limited distribution |
| Added: | 13th August 2017, 21:21:46 |
| Downloads: | 941 |
| Author: | Roger Wensley |
| Size: | 29.61 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Chennai airport for fs9/Fs2004 |
|
File Description:
Hi everyone
This is my first project, and it took 6 months to complete. This is a freeware airport, but I have tried to put in as much detail as I possibly can. I made this airport because FS9 did not have very many good-quality payware or freeware airports, so I decided to make an airport for my home country. Some general info for the airport is below:
Chennai International Airport (MAA), located in Meenambakkam, is the primary airport serving Chennai, Tamil Nadu, and the southern part of India. It has two terminals: Terminal 1 for domestic flights and Terminal 2 for international flights. The airport is known for its modern infrastructure and facilities, including shopping areas, lounges, dining options, and passenger services. It is an important hub for domestic and international travel, especially for travelers heading to South Asia, Southeast Asia, and the Middle East. The airport also has strong connectivity via road and metro.
Features of the scenery:
1)Has the latest terminal and airport layout since I used the latest data
2)added buildings to the surroundings (Custom 3d model made from scratch even the terminals)
3)has partial photoreal scenery(will talk about issues in bugs area)
4)has good jetbridges
5)3d volumetric grass in certain parts(will talk about issues in bugs area)
6)taxiways designed as in real life
7)Includes parked cars, lights, nearby buildings
8)Added lots of ground equipment
9)Trees around the airport
10)airport perimeter walls
11)Used Lh simulations library for some buildings and volumetric grass
Known bugs:
1)photoreal scenery has some issues since I can't get my photoreal scenery maker to work properly
2)Papi lights are kinda bugged
3)3d volumetric grass is limited to some parts due to fps loss
How to install:
1)Download file
2)Extract from rar using WinRaR or other program
3)paste vomm in the addon scenery of your flight sim installation directory and add scenery in settings once you open fs9
4)Includes better default textures for aprons and taxiways (optional!!!!!)
5)enjoy!!
Reminder: This airport does not have custom taxiways or aprons the default textures modified by me are the ones used in the picture. If you decide to replace your default files with mine all your airports globally(default) will have these textures for taxiways and aprons.
Tested to run on low-end devices with minimal lag
will run well on better devices
Hope you enjoy this completely freeware scenery and always read the above instructions to avoid unnecessary scenery limitation discussions.
Thank all you fs9 folks.
Download link: https://sharemods.com/imxa719wg065/Chennai_airport_fs9.rar.html
| Filename: | Chennai_airport_for_fs9Fs2004.zip |
| License: | Freeware |
| Added: | 18th January 2025, 01:22:51 |
| Downloads: | 242 |
| Author: | Jeremy(lol890) |
| Size: | 92.14 MB |
| Category: Flight Simulator X - Scenery | |
| KCLL Easterwood Airport College Station Texas USA |
|
Images related to this file:
File Description:
Easterwood College Station Texas Airport for FSX. Several improvements have been made to the default airport. The default terminal building has been replaced with one created in FSDS; aircraft gates have been correctly coded using Airport Design Editor 1.70.6042; a new airport vehicle network has been built to prevent airport vehicles from entering the taxiways; extra fuel trucks have been added throughout the airport; the tower view has been changed to display from the roof of the control tower; all taxiway signs are correctly placed and all taxiway designators are correctly named; there is the option to open all runways to AI traffic; optionally, a set of GA flight plans is included using all default FSX aircraft to liven up the GA area; and Jim Dhaenen's excellent ramp lights are also included. Please refer to the README.txt file to insure proper installation of all files.
| Filename: | KCLL_Easterwood_Airport_College_Station_Texas_USA.zip |
| License: | Freeware, limited distribution |
| Added: | 25th November 2017, 16:08:22 |
| Downloads: | 442 |
| Author: | Patrick Finch |
| Size: | 1.09 MB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| NZAA Afcad2 V2a - "Auckland 2005" |
|
File Description:
AFCAD2 for Auckland International Airport (NZAA) V2a! for use with the auckland2005.zip scenery which uses Shayne Butler's FS2002 airport. SCENERY NOT INCLUDED! This file is an update of my previous AFCAD for the airport (nzaa_afcad2_fs2k2_scenery.zip) and in my opinion much more detailed than the one supplied with the scenery. This file includes accurate Gate and Parking Positions, with improved night lighting, two helipads (with night lighting), totally re-done International Terminal {now including the four new hard stands recently built} and many many more great enhancements...All taxiways and runways have been created using a real life chart for the airport. This file does not work that well with the default airport and it works better without addon AI traffic, thought it is ok. Tower views are from the roof of the tower. See Readme for further details of what has been enhanced/modified.
| Filename: | NZAA_Afcad2_V2a__Auckland_2005.zip |
| License: | Freeware, limited distribution |
| Added: | 4th May 2005, 12:50:50 |
| Downloads: | 1,151 |
| Author: | Keagan Gaarkeuken |
| Size: | 342.74 KB |
| Category: Flight Simulator X - Scenery | |
| Quebec CYQB |
|
File Description:
This is the second edition of CYQB Quebec Jean Lesage Int’l airport for FSX. Countless hours over a two years period have been devoted to develop this very accurate and truly remarkable scenery. It includes more than 50 highly detailed buildings, hangars and special features making this scenery extremely realistic and for the virtual pilot a place to visit. The center piece is the new terminal shaped like an airfoil that has been inaugurated last June. Very diversified operations take place at this airport from flying school, aircraft overhaul and international charter to domestic traffic. You will find also a fleet of 14 CL215 and CL415 water bombers operated by the Service Aerien Gouvernemental. Flying to CYQB at the control of your favorite plane will be a truly enjoyable experience. After a first visit to this airport you will make Quebec one of your favorite destinations. It is guarantee.
| Filename: | Quebec_CYQB.zip |
| License: | Freeware |
| Added: | 13th April 2009, 07:58:27 |
| Downloads: | 6,781 |
| Author: | Gilles Boily |
| Size: | 12.03 MB |
| Category: Flight Simulator 2004 - Scenery | |
| KLBB - Preston Smith Intl. - Lubbock, Texas Version 2.0 |
|
Images related to this file:
File Description:
Thank you for downloading this scenery. Lubbock is another one of those little known, neglected airports that populate the
FS world. Avery simple airport, LBB somewhat feels like a little DFW. There is a very DFW-ish main terminal with fewer than
10 gates and plenty of space to grow. The only mainline service is courtesy Southwest, but several RJ's freqent Lubbock
several times per day along with the big freighters. This airport was built from the ground up with excellent detail,
and because of the sparse traffic, frame rates are excellent as well.
Update:
Recently, Lubbock has moved their east-west runway 8/26 roughly 1000 feet to the East so as to eliminate runway incursions
by separation from the north-south runway 17R-35L. Version 2.0 reflects this modificaton. Several taxiways have been removed
or modified, and airport fencing has been altered to reflect the change.
| Filename: | KLBB__Preston_Smith_Intl__Lubbock_Texas__Version_2.zip |
| License: | Freeware |
| Added: | 30th September 2012, 07:38:45 |
| Downloads: | 846 |
| Author: | FRFstudio.net / William Morgan |
| Size: | 8.09 MB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| Nigel Grant's Vancouver Int'l with X-Wind runways |
|
File Description:
A high quality AFCAD2 for use only with FS2004 Vancouver Airport scenery version 4.1 by Nigel Grant. This file has been built with the aid of charts, and features real life runway lengths - runway 08L/26R is 9940ft, runway 08R/26L is 11500ft long. Assigned parking for all airlines and cargo carriers that serve the airport is included, including regional carriers that use the south terminal. An extensive GA area is now available at the airport. Also featured is the Air Canada maintenance area, overrun areas on the runways, overflow parking and many helipads. All aprons are represented as near to real as possible. Using the crosswind runway tecnique, non parallel runway 12/30 has been activated and can be used for take-offs and landings at the same time as both the main 08/26 runways. This AFCAD is not suitable for use with the default FS2004 airport. Enjoy!!
| Filename: | Nigel_Grants_Vancouver_Intl_with_XWind_runways.zip |
| License: | Freeware |
| Added: | 2nd March 2005, 22:30:20 |
| Downloads: | 2,050 |
| Author: | Lee Brompton |
| Size: | 73.54 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| Mc Carran International Airport, Las Vegas, Nevada (KLAS) |
|
File Description:
This is an AFCAD2 file for the default FS9 Las Vegas McCarran airport. All gates in the AFCAD are indentifed properly, per the McCarran website. There are 18 America West gates, 15 Southwest gates, and all the other major airlines are there as well including the international and charter terminal. This is primarily a commercial airliner AFCAD as I did not include any executive gates or cargo gates. (Sorry UPS and FEDEX guys) I've updated and upgraded the taxiways, and even included the areas under construction. (Some of it may be done in real life by now though) I think you'll find that the aprons are done realistically as per the real Las Vegas airport, which is quite different than the FS9 default, so becareful when you're taxiing online. Otherwise, I hope this file increases your gaming experience when flying into Las Vegas. Thanks for trying it out.
| Filename: | Mc_Carran_International_Airport_Las_Vegas_Nevada_K.zip |
| License: | Freeware |
| Added: | 21st March 2005, 13:25:24 |
| Downloads: | 2,524 |
| Author: | Jaxan Prier |
| Size: | 14.2 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| KCRW - Yeager Airport, Charleston, WV |
|
File Description:
this is re make of the Default Yeager airport. i have moved the taxiways, changed widths, adjusted the runway, and added almost all of the gates exactly as in real life. this is as real is it can possibly get. All gates have airline assignment as in real life. Works great with projectai. the only thing that isnt currently there but is on my afcad is the RSA at the end of runway 5 currently under construction.
Also added is General aviation parking..some spaces clash with default scenery because they are in real life hangars. there is also correct parking for the 130th Airlift wing on the tarmac across from the main terminal. enjoy! any questions of comments feel free to and please e mail me at [email protected]. i would love some feedback as this is has been a project of mine for a while.
| Filename: | KCRW__Yeager_Airport_Charleston_WV.zip |
| License: | Freeware, limited distribution |
| Added: | 29th May 2005, 22:33:27 |
| Downloads: | 646 |
| Author: | Anthony Gilmer |
| Size: | 5.84 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |