Category: Flight Simulator 2004 - Flight Plans
RTW-K4-08

File Description:
An FS2K4 GPS flight and plan by the Ancient Brit and the RTW-K4 Team for the FS2K4 default aircraft (B737-400) and scenery. Depart Zurich (LSZH) runway 16, Switzerland and arrive 59 minutes later at Zeltweg A.B (LOXZ) runway 08, Austria. The plan is fully flight briefed with Word and text briefings and kneeboard in-flight briefing. A start-up flight that loads the plan, weather and kneeboard flight briefing is included; also a short Finals practise flight is included. A low level departure through an Alpine valley is followed by a frolic between mountain tops before the flight concludes with another valley approach and a non-ILS landing.

Filename:	RTWK408.zip
License:	Freeware
Added:	1st December 2003, 02:46:37
Downloads:	741
Author:	Denis Egan
Size:	114.83 KB

Category: Flight Simulator 2004 - Scenery
Russia & Middle Asia Airports

File Description:
These files enable the FS2002 scenery collection of Russia & Middle East Republic Airports Part 1 by Vladimir Svobodfor - rusnew.zip - to work with FS2004. Also included are EditVoicepack files to provide proper names on the ATC system for the airports concerned. The new AFCAD files will allow you to plan routes, and take off and land at all but one of the airports in the scenery collection, and ATC will route you appropriately. Several of the airports have ILS landing systems. AI aircraft can be added, and will land, taxi, park and take off in the correct locations. Many thanks to Vladimir for his original work.

Filename:	Russia__Middle_Asia_Airports.zip
License:	Freeware
Added:	8th May 2004, 18:16:47
Downloads:	2,476
Author:	John Hinson
Size:	118.76 KB

Category: Flight Simulator 2004 - Original Aircraft
Beech 18 Volpar

File Description:
The Beech 18 was one of Beechcraft's most enduring designs. In production from the late 1930's until the early 60's many are still in use all over the world. This plane represents a late Model Super H with the Volpar Trigear conversion. The Volpar kit added an extended nose and converted the plane to a tri-gear configuration rather than the stock taildragger landing gear. Features: Full FS 2004 control surface animation, Opening door (shift-E) Dynamic shine, Reflective textures, Panel, Virtual cockpit, Rolling wheels and of course full lighting. A paint kit is also included and repaints are encouraged but please only upload textures, not the whole plane.

Filename:	Beech_18_Volpar.zip
License:	Freeware, limited distribution
Added:	12th October 2004, 15:28:58
Downloads:	11,572
Author:	Brian Gladden
Size:	5.19 MB

Category: Flight Simulator 2004 - AFCAD Files
EKHG Herning, Denmark

File Description:
AFCAD file for FS2004 EKHG Herning Denmark This is one of the airports I fly from my self, and therefor I have made a more presice AFCAD file for use. I have extended the grass runway 09/27, which is used for gliders, and made small fixes for the parking area at the hangers. Furthermore I have included a helipad, because it's very common that small helo's are landing at Herning. I have also made one parking spot to the north of the gliderstrip, which normally are used for motorgliders. I haven't been able to make new hangers yet, but this will be added at a later time. Easy to install.!

Filename:	EKHG_Herning_Denmark.zip
License:	Freeware
Added:	12th February 2005, 17:30:45
Downloads:	510
Author:	Richardt Raymond Andersen
Size:	2.77 KB

Category: Flight Simulator 2004 - Gauges
VTOL/Hover gauge for Alphasim's V22-Osprey

File Description:
This freeware gauge adds new VTOL & Hover features to Alphasim's V22-Osprey. Besides true vertical takeoff&landing, it allows you to fly forward, backward, sideways and turn, while in a hover. This solution is based on overriding the normal FS flightdynamics while in a hover, simular to the implementation of catapult launch / cable arrest in my Carrier Operation Package; in short, it's a VTOL&Hover FDE coded in a gauge. Special thanks to Doug Dawson, who created a gauge that provides for overriding FS2004 variables from an XML gauge. Requires FSUIPC (registered or unregistered). The README includes extensive installation and flying instructions. By Rob Barendregt.

Filename:	VTOLHover_gauge_for_Alphasims_V22Osprey.zip
License:	Freeware, limited distribution
Added:	27th November 2005, 22:49:41
Downloads:	1,382
Author:	Rob Barendregt
Size:	66.21 KB

Category: Flight Simulator 2004 - Scenery
Bay Bridge Airport (W29) - Stevensville, Maryland, USA

File Description:
This file updates Bay Bridge Airport (W29) with some enhanced scenery. Bay Bridge is a smaller airport at the base of the Chasapeake Bay bridge. The approach to this airport gives an amazing view of the bridge and the bay. One interesting note about this airport is that it lies within the Washington Air Defense Identification Zone (ADIZ). This means that special procedures are required departing and landing at this airport in real life. Of course, in FS2004, it doesn't matter, but try to follow the proper procedures as much as possible in the game for a challenge. This file includes a custom afcad and optional static aircraft.

Filename:	Bay_Bridge_Airport_W29__Stevensville_Maryland_USA.zip
License:	Freeware, limited distribution
Added:	22nd April 2006, 19:14:12
Downloads:	1,159
Author:	Craig Swartzlander
Size:	6.83 KB

Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications
LADU-Colombia Douglas DC-3

File Description:
FS2004. Texture sets only, requiring the base model of the GMAX MAAM-SIM R4D/DC-3 available from www.maam.org. Based on original textures by Jan Visser. Cargo Model. LADU-Colombia from Historic Airways (Breathing new live into old planes). Not much is know about LADU-Colombia, internet research listed some planes, but nothing on the airline itself. This plane (A Super DC-3) was left at the cargo ramp at Jose Maria Cordova (MDE / SKRG), Colombia (reasons unknown) and over the years is now overgrown. From the picture, it looks like the landing gear has been removed and now sits on blocks. Photo taken 27 July 2005.

Filename:	LADUColombia_Douglas_DC3.zip
License:	Freeware
Added:	5th October 2005, 14:55:49
Downloads:	478
Author:	Tim Trivett
Size:	4.8 MB

Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications
CS Legendary C-130, RAF Mk 1 Rough Strip Prep

File Description:
This paint scheme was worn on RAF C130's during most of the 1970's to early 90's. This is an updated and modified version of my orignal repaint. Please read the Read Me file located in this Zip file to veiw changes.This particular scheme is in the configuration of "Rough Strip Prep". The belly of the aircraft is covered in black rubber matting to give extra protection form flying debris encountered during landings on unprepared landing strips. It also included armour plating to the main undercarriage doors, cables and brake lines.This repaint requires Captains Sims Legendary C130 Packageand is fully ACE compliant.

Filename:	CS_Legendary_C130_RAF_Mk_1_Rough_Strip_Prep.zip
License:	Freeware
Added:	5th January 2006, 03:11:39
Downloads:	1,591
Author:	David (Dax) Sweetman
Size:	5.83 MB

Category: Flight Simulator X - Original Aircraft
Sky Arrow 650 TCNS

File Description:
FSX Aircraft - The Sky Arrow 650 TCNS is a tandem seat aircraft designed and manufactured in Italy by Iniziative Industriali Italiane (Meteor) S.p.A., a company manufacturing gliders, airplanes and Remotely Piloted Vehicles since 1947. This version of the Sky Arrow has been designed as sport and recreational aircraft, as well as for training, research and aerial surveillance. The Sky Arrow 650 TCNS, being almost entirely made of carbon fiber in epoxy resin, features a strong composite structure and therefore has a very high strength to weight ratio. It is a single engine, high wing, T-tail and fixed tricycle landing gear aircraft. Created with FSDSv2.10 by John B. Loney, Jr.

Filename:	Sky_Arrow_650_TCNS.zip
License:	Freeware, limited distribution
Added:	31st July 2007, 22:08:52
Downloads:	2,046
Author:	John B. Loney, Jr.
Size:	2.29 MB

Category: Flight Simulator 2004 - Original Aircraft
Sky Arrow 650 TCNS

File Description:
FS2004 Aircraft - The Sky Arrow 650 TCNS is a tandem seat aircraft designed and manufactured in Italy by Iniziative Industriali Italiane (Meteor) S.p.A., a company manufacturing gliders, airplanes and Remotely Piloted Vehicles since 1947. This version of the Sky Arrow has been designed as sport and recreational aircraft, as well as for training, research and aerial surveillance. The Sky Arrow 650 TCNS, being almost entirely made of carbon fiber in epoxy resin, features a strong composite structure and therefore has a very high strength to weight ratio. It is a single engine, high wing, T-tail and fixed tricycle landing gear aircraft. Created with FSDSv2.10 by John B. Loney, Jr.

Filename:	Sky_Arrow_650_TCNS.zip
License:	Freeware, limited distribution
Added:	31st July 2007, 22:09:29
Downloads:	1,192
Author:	John B. Loney, Jr.
Size:	1.76 MB