Category: Flight Simulator X - AFCAD Files
Alliance Airport (23NJ), NJ

File Description:
Located 02 miles SE of Pittsgrove, New Jersey on 3 acres of land, Alliance Airport is a privately-owned turf airstrip included in FSX. If you don't plan on making any trips here, then this AFCAD file will remove the runway and prevent it from randomly sticking out on the satellite textures. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Alliance_Airport_23NJ_NJ.zip
License:	Freeware
Added:	22nd October 2010, 06:03:59
Downloads:	203
Author:	Drew Sikora
Size:	174.79 KB

Category: Flight Simulator X - AFCAD Files
Rudys Airport (25N), NJ

File Description:
Located near Newfield, New Jersey, Rudys Airport is a privately-owned turf airstrip. Trees close to the runway on one end and water on the other can provide for a challenging approach. The turf strip is 2364x100 with a heading of 08/26. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Rudys_Airport_25N_NJ.zip
License:	Freeware
Added:	22nd October 2010, 15:51:59
Downloads:	153
Author:	Drew Sikora
Size:	683.52 KB

Category: Flight Simulator X - AFCAD Files
Marlboro Airport (2N8), NJ

File Description:
Marlboro Airport in Matawan, NJ was closed in 2002. The runway has been modified to reflect its closed status and all taxiways, buildings, etc have been stripped to show satellite textures. FSX doesn't simulate old broken down runways possibly breaking your landing gear so if you still want to hit that with a Touch and Go I'm sure the virtual FAA won't notice.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Marlboro_Airport_2N8_NJ.zip
License:	Freeware
Added:	24th October 2010, 18:52:50
Downloads:	178
Author:	Drew Sikora
Size:	197.29 KB

Category: Flight Simulator 2004 - Scenery
KTOL Toledo Express Airport

Images related to this file:

File Description: This file requires RWY12 to work correctly. This updates the KTOL airport by adding jetways to the main terminal, and correct airline parking. Also added correct Cargo ramps and military ramps. Other GA General Aviation parking.

Filename:	KTOL_Toledo_Express_Airport.zip
License:	Freeware
Added:	31st January 2011, 00:59:05
Downloads:	629
Author:	Rob Touchtone
Size:	984.01 KB

Category: Flight Simulator X - AFCAD Files
Winchelsea Airport (8NJ0), NJ

File Description:
Located 01 miles W of Port Republic, New Jersey, Winchelsea Airport is a private turf strip. Pay very, very close attention to the published length of this grass runway: 980'. This is in addition to 50ft tree obstacles at either end of the runway. Double-check your aircraft's takeoff and landing distances before visiting this airfield!! A strong headwind is suggested for operations out of this location. Also take note the traffic patterns vary for each runway. There are no transient services offered and the airport is not lit at night so daytime VFR use only is suggested. There is no hard surface runway so set your terrain mesh slider as high as you can for the best effect of landing on terrain.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.

This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Winchelsea_Airport_8NJ0_NJ.zip
License:	Freeware
Added:	24th March 2011, 19:28:46
Downloads:	162
Author:	Drew Sikora
Size:	396.23 KB

Category: Flight Simulator X - AFCAD Files
Stallone Airport (9NJ5), NJ

File Description:
Located 01 miles SE of Harrisonville, New Jersey, Stallone Airport is a private turf strip 1350' in length. However it should be noted that the actual length from the road to the trees on the opposite end of the runway is actually only around 900'. It is tightly hemmed in by trees so if you are landing on Runway 29 you may want to use Slew to turn your plane around to remove the risk of bumping into a tree instead. If you land on Runway 11 you can cross the road to turn around in the field opposite the runway. The windsock can be seen from both runways. Power lines run along the heights of the trees as well for the Runway 29 approach, on the same side as the trees though so not really any additional worry there. No transient services are available. There is no hard surface runway so make sure your terrain mesh slider is set as high as possible for a suitably bumpy ground experience. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Stallone_Airport_9NJ5_NJ.zip
License:	Freeware
Added:	5th April 2011, 07:34:54
Downloads:	170
Author:	Drew Sikora
Size:	332.91 KB

Category: Flight Simulator X - AFCAD Files
Coombs Airport (7NJ7), NJ

File Description:
Located 04 miles NE of Elmer, New Jersey, Coombs Airport is a private turf field 2000' in length wilth clear 20:1 approach and departure at each end of the runway. You'll find some surrounding buildings but they are all located several hundred yards from the runway. This is a good strip to keep in mind for emergencies if you're in the area. You will be landing on terrain so having your mesh complexity set as high as possible is recommended. This airport is not lit at night, daytime VFR operations only are suggested. There are no transient services offered. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Coombs_Airport_7NJ7_NJ.zip
License:	Freeware
Added:	16th February 2011, 00:03:55
Downloads:	191
Author:	Drew Sikora
Size:	756.22 KB

Category: Flight Simulator X - AFCAD Files
Vliet Airport (6NJ1), NJ

File Description:
Located 02 miles SE of Washington, New Jersey, Vliet Airport is a private turf field. Trees border the runway on three sides, and a dirt mound and semi-truck are also obstacles to watch out for at the end of Runway 06 if you land long. At 1300' feet, it is a very short runway so make sure you check the capabilities of your aircraft before attempting to either land or take off here! Don't forget that in order to clear trees, usable runway space is closer to only 1000'. This airport has no lighting so daytime VFR operations only are recommended. Take note that there is also no wind sock, so be sure you are aware of the weather conditions prior to arriving/departing. There is also no hard-surfaced runway and you will be landing on terrain so it's suggested you have your mesh resolution slider as high as possible. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Vliet_Airport_6NJ1_NJ.zip
License:	Freeware
Added:	8th February 2011, 23:20:47
Downloads:	182
Author:	Drew Sikora
Size:	375.28 KB

Category: Flight Simulator 2004 - Gauges
Airport ID Gauge - UPDATE

File Description:
At the request of several users, I have edited the xml script for the Airport ID gauge to make the displayed text more easily read. Instead of a Green ICAO code and Red airport name and city, the text is now all Green. Also the icon has been changed to black and white so it blends with the other default icons. This is just a replacement cab file so no further editing to what you may have already installed is necessary however a previous installation of Airport_ID.zip is required. Please unzip to a temporary folder and follow the very simple installation instructions. Compiled for your flying enjoyment by David "Opa" Marshall.

Filename:	Airport_ID_Gauge__UPDATE.zip
License:	Freeware
Added:	9th February 2011, 20:27:20
Downloads:	1,400
Author:	David "Opa" Marshall
Size:	4.37 KB

Category: Flight Simulator X - AFCAD Files
Parker Airport (70NJ), NJ

File Description:
Located 02 miles S of Asbury, New Jersey on 13 acres of land, Parker Airport is a private turf strip located on residential property. This airport is challenging in many ways. For one, when approaching from the southeast the airport is located immediately after a tall ridge, so when topping this ridge at altitude you may not even see the airport over the nose of your aircraft before you overfly it. The runway for this airport is 1600' feet long but it is curved and slightly sloped perpendicular to your roll, so significant rudder will be needed to stay aligned - be careful when operating with any crosswind component! It is highly recommended that you only depart via Runway 25 and arrive via Runway 07 to avoid having to clear significant obstacles prior to landing or after taking off. This airport has no hard-surfaced runway and there is a very noticeable "bump" in the terrain halfway down the runway that will literally bounce your aircraft into the air - I tried my best to smooth it over but could not get rid of it entirely. When taking off make sure you have back pressure applied so your main gear only bounce you high enough to remain within ground effect - hitting your nose wheel can cause an extreme pitch up leading to a stall. Trees close in tight to the runway at the end of Runway 07 or the start of Runway 25, however collision has been disabled with the trees nearest the runway so you can scrape some branches if needed on the takeoff/landing rolls. The author has successfully departed and arrived on both runways in the default Cessna 172 under moderate crosswind from the northeast. This field may definitely require some practice but it is usable!! This airport has no edge lighting, so daytime VFR operations only are recommended. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Parker_Airport_70NJ_NJ.zip
License:	Freeware
Added:	10th February 2011, 05:04:30
Downloads:	215
Author:	Drew Sikora
Size:	559.02 KB