Where Flight Simulation Enthusiasts Gather from Around the World!

AVSIM Library - Search Results

Searching for: ' Zaklad Remontov MDM-1 Fox ' in AVSIM File Library and below.
Return to Library Index
Found 6,540 files (654 pages)

Category: X-Plane - Original Aircraft
F-111F Aardvark For X-Plane 6.40/6.51 Download

File Description:
F-111F Aardvark for X-Plane 6.40/6.51 - After a prolonged development period in which many, many problems had to be identified and fixed, the F-111 turned out to be one of the most effective all-weather interdiction aircraft in the world. Although highly critisized by some as being an unsafe and dangerous plane, the F-111 series of aircraft established the best safety record of any of the aircraft in the Century Series of fighters with only 77 aircraft being lost in a million flying hours (that's hours not miles). There was no other aircraft in service with the USAF which could carry out the F-111's mission of precise air strikes over such long ranges in all-weather conditions. Although the aircraft has left USAF service, it still serves with distinction with the Royal Australian Air Force and may very well continue there until 2020. The original concept for the F111 was for both a USAF and US Navy version. Weight problems led to cancellation of the Navy version in 1968. The F111 was the first swing wing fighter, the first with a side by side escape capsule for the operators and the first able to cruise at over mach 1 without after burning. It was also the first bomber with greater than mach 2.5 capability. The F version has a wingspan of 63.0 ft. spread, a length of 73.5 ft. and is powered by two 25,100 lb static thrust engines with afterburning. Gross takeoff weight is 100,000 lb., maximum ordinance 31,000 lb and internal fuel 5025 USgal. Range is greater than 2500 nm with internal fuel and service ceiling is above 60000 ft.


Filename: F111F_Aardvark_For_XPlane_640651.zip
License: Freeware, limited distribution
Added: 26th February 2003, 02:08:23
Downloads: 486
Author: Robert App
Size: 169.58 KB


Category: X-Plane - Original Aircraft
F-111F Aardvark v1.1 Download

File Description:
F-111F Aardvark v1.1 for X-Plane 6.40/6.51 - After a prolonged gestation period in which many, many problems had to be identified and fixed, the F-111 turned out to be one of the most effective all-weather interdiction aircraft in the world. Although vilified by some as being an unsafe and dangerous plane, the F-111 series of aircraft established the best safety record of any of the aircraft in the Century Series of fighters with only 77 aircraft being lost in a million flying hours. There was no other aircraft in service with the USAF which can carry out the F-111's mission of precise air strikes over such long ranges in all-weather conditions. Although the aircraft has left USAF service, it still serves with distinction with the Royal Australian Air Force and may very well continue until 2020. The original concept for the F111 was for both a USAF and US Navy version. Weight problems led to cancellation of the Navy version in 1968. The F111 was the first swing wing fighter, the first with a side by side escape capsule for the operators and the first able to cruise at over mach 1 without after burning. It was also the first bomber with greater than mach 2.5 capability. The F version has a wingspan of 63.0 ft. spread, a length of 73.5 ft. and is powered by two 25100 lb static thrust engines with afterburning. Gross takeoff weight is 100,000 lb., maximum ordinance 31,000 lb and internal fuel 5025 USgal. Range is greater than 2500 nm with internal fuel and service ceiling is above 60000 ft.


Filename: F111F_Aardvark_v11.zip
License: Freeware, limited distribution
Added: 12th March 2003, 04:35:23
Downloads: 1,078
Author: Robert App
Size: 160.52 KB


Category: Flight Simulator 2004 - Original Aircraft
Piaggio P-166DL3 SEM Patrol Version Download

File Description:
Thanks to Andrew Spring of www.p166.com!! The seventh of the coming P-166 aircraft series. I'm going to built the whole family of these graceful twins. The Piaggio P-166A is a light small twin. An Exotic two-engined prop that sold all over the world including America, UK, and Australia. The P-166DL3 is the actual production version of a plane that firt flew in 1957, now with turboprop engines, new avionics, increased fuel capacity, and completly new hydraulic and electric system. Its origin is traced Back to the Piaggio P-136, a light anphibian, which the P-166 keeps the wings, the engines and the tailplanes. The first P-166A flew in November 1957, and the DL3 is dated 1976. The APH version (Aero-PHotograammetric) was originally built featuring a flat bottom with opening holes for cameras and orher devices, planning to use the unit for logistic squads, that never formed. So the APH internal features were generally limited to Military high density transport, paratrooper transport, or Cargo. Units fitted with APH original projected photogrammetric capibilities are very rare. he SEM version can be esily identified by the big sonar under the nose, the FLIR under the left wing and a search light on the right wing. It' a maritime antismuggling patrol aircraft, and it's used by the italian Cost guard and "guardia Di Finanza (Finance Guard). The aircraft waits to be repalced by a new version, the P-166DP-1, with PT-6A engines. This model is 740 Kbs with c.a. 21000 polygons in c.a.160 assemblies. Features Clickable Dynamic Photoreal VC with non-planar throttle quadrant. New here is the photoreal panel. Detailed internals.


Filename: Piaggio_P166DL3_SEM_Patrol_Version.zip
License: Freeware
Added: 19th May 2004, 15:22:01
Downloads: 7,229
Author: Mario Noriega
Size: 7.41 MB


Category: Flight Simulator 2004 - Scenery Design
FSDEM 1.1 Download

File Description:
FSDEM is a graphical tool designed to help on the editing and correction of NASA SRTM (Shuttle Radar Topography Mission) terrain elevation meshes, and to create terrain mesh scenery to be used in Microsoft Flight Simulator 2002/2004.

Program main features:

  • Can read SRTM-1 and SRTM-3 HGT file types.
  • Automatic reading of HGT files from ZIP files (as distributed by USGS), saving disk space. No need for external decompressors.
  • Can read binary raster files. Useful to import DEM data from 3rd party GIS applications.
  • Easy-to-build mosaic: just select the HGT source folder and the coordinates of the bounding rectangle, and the program will join the appropriate HGT files into a single working mesh, fully editable, on-screen.
  • Ability to load adjoining tiles for better interpolation results.
  • Graphical editing of elevation data: selective area filling, offseting, clipping, etc.
  • Interpolation capability for missing data (voids) - parametric Inverse Distance Weighted Average Interpolation.
  • Edit-enabled zoom modes.
  • Multi-level "undo" capability.
  • Ability to append overlapping bands to the output BGL (useful to avoid visual glitches caused by adjoining BGL areas).
  • Creates BGL files with a single click. No need to manually create an INF file. No need to use Microsoft Resample directly.
  • Support for user-supplied additional INF files.
  • Ability to export the terrain mesh to a binary raster file for further editing in 3rd party GIS tools.
  • Can save the terrain mesh to a BMP picture for reference.
This version fixes some bugs and adds minor improvements. See the included file history.htm for details.


Filename: FSDEM_11.zip
License: Freeware, limited distribution
Added: 4th August 2004, 20:51:02
Downloads: 5,125
Author: Emerson de Oliveira
Size: 377.03 KB


Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications
AFG YS-11m V2.7 JASDF 40th anniversary Download

File Description:
for AFG`s YS-11 v2.7 ONLY. YS-11m JASDF 40th colour scheme textures and a NEW MODEL.M,which puts this aircraft on the correct model of aircraft,by giving it a rear cargo door,and a second whip aerial,you must have the AFG YS-11jac.zip for the V2.7 in fs9.in order for these textures and NEW[model m] to work. also included are the modified aircraft config text,that needs to be added to the aircraft.cfg file.for the aircraft to show in fs9. the 40th aniversary aircraft was painted with ref to photos i could find,on airliners.net,and a web site for JASDF aircraft,plus some updated info from Esa of AFG,so the textures have been updated as much as posible. The correct 402 squadron badge has been put on the tail,thanks to help from esa of AFG,for pointing me to the correct web site with JASDF squadron details. The aircraft will show in fs9 as [Japan air force 159 40th V2.7]. Also included in this package is the 159 in standard JASDF 402 SQDN colours,and it will show as [Japan air force 159 std V2.7]. MODS over original aircraft are:- 1)windows on port side reworked 2)cargo door lines added port side 3)new cargo bay textures added 4)NEW fuselage_l textures to align the NEW windows 5)NEW standard JASDF 402sqdn colour scheme included Original textures and model and the NEW [model.m] by Esa of AFG,JASDF40th and standard 402sqdn textures where done by me alan cottrill,if you have any problems with the JASDF textures,then please contact me.


Filename: AFG_YS11m_V27_JASDF_40th_anniversary.zip
License: Freeware
Added: 10th November 2006, 16:14:15
Downloads: 927
Author: Alan Cottrill & Esa Kaihlanen
Size: 11 MB


Category: Flight Simulator 2004 - Sounds
Douglas DC-6 sound.cfg V.3 Download

File Description:
This sound.cfg replaces the one uploaded in August 2008. Both the interior and exterior sounds have been improved. Please replace the sound.cfg you already downloaded by this new one. In my search for a good sound for the Douglas DC-6/-6A/-6B/-6C, XC-112A/YC-112A, VC-118, the C-118A/R6D-1 series and the Canadair C-5, I struck on the fabulous soundpack for the beautiful Douglas A-26 Invader of Milton Shupe and the Sim-Outhouse Team, made by David C. Copley. Most of the wav-files in this soundpack are recordings of the Pratt & Whitney Double Wasp R-2800 engines of an A-26 Invader. Having studied the Invaders sound pack, I discovered that by ‘tweaking’ the sound.cfg, particularly with regard to the exterior sounds, it became possible to develop a good exterior DC-6 sound (4 engines). No changes were made to the wav-files, as I didn’t want to modify them; the wav-files just sound wonderful. In order to make your system reproduce the DC-6 sound, first download from www.sim-outhouse.com the great Douglas A-26 Invader package and enjoy flying that plane. Then copy the sound pack of the A-26 to the DC-6, and replace the existing sound.cfg by the revised one you just downloaded. This DC-6 sound has been tested in FS2004 only. Special thanks to David C. Copley who gave his permission to upload the modified sound.cfg as freeware, with limited distribution, at Sim-Outhouse.com and Avsim.com. Many thanks also to Milton Shupe and to Wayne Tudor for his advise. Author of the original sound pack: David C. Copley. Modified sound.cfg: Maarten Brouwer.


Filename: Douglas_DC6_soundcfg_V3.zip
License: Freeware, limited distribution
Added: 6th October 2008, 19:20:54
Downloads: 1,043
Author: David C. Copley & Maarten Brouwer
Size: 365.92 KB


Category: Microsoft Flight Simulator (2020) - Aircraft Repaints, Textures and Modifications
Goodyear FG-1D Corsair VF-17 #29 Lt Kepford Download

Images related to this file:

File Description:
This folder contains a repaint for the FG-1D Corsair by Milviz, in the colors of F4U-1 BuNo 55995 of VF-17, the aircraft flown by Lt (jg) Ira C. Kepford, Bougainville, February 1944. Ira Cassius Kepford was born in Harvey, Illinois, on May 29, 1919, son of George Raymond and Emma McLaughlin Kepford. His family moved to Muskegon, Michigan, shortly after he was born. An all-around athlete at Muskegon High School from 1935-1937, he capped his prep career by being named an All-State back in his senior year. He enrolled at Northwestern University in 1938 to study for a dentistry career. He enlisted in the U.S. Naval Reserve on August 18, 1941, and was honorably discharged on April 29, 1942, to accept appointment as Aviation Cadet, U.S.N.R. After flight training at the Naval Air Stations, Corpus Christi, Texas, and Miami, Florida, he became a Naval Aviator on November 5, 1942, and was commissioned Ensign, U.S.N.R., with date of rank October 16, 1942. Detached from Naval Air Station, Miami, Florida, in December 1942, he served with Fighting Squadron 17 in the Pacific War Area until March 1944, where he became the U.S. Navy's leading ace, scoring a record 16 confirmed Japanese planes destroyed. That squadron won the Navy Unit Commendation and he was personally awarded the Navy Cross, a Gold Star in lieu of the second Navy Cross, the Silver Star Medal and the Distinguished Flying Cross. From March until June he was attached to the Fleet Air, Alameda, Command, and the last six months of that year served with Fighting Squadron 84. In December 1944 he was transferred to the staff of Commander Fleet Air, West Coast, and remained in that assignment throughout the remaining period of hostilities. Repaint by Jan Kees Blom.


Filename: Goodyear_FG1D_Corsair_VF17_29_Lt_Kepford.zip
License: Freeware
Added: 4th April 2021, 15:38:23
Downloads: 63
Author: Jan Kees Blom
Size: 41.83 MB


Category: Microsoft Flight Simulator (2020) - Utilities
MSFS P3D FSX FS2004 Flight Analyzer Utility FsQC V6.19 Download

File Description:
FSX Flight Analyzer Utility FsQC v7.20 Flight Data Recorder - with Logbook. FOR: P3D, FSX(Steam) and FS2004 Now MSFS2020 also supported. Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file) What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use. Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc. This is all fully freeware. Full manual at: www.fsqc.eu Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart with Touch&Go and Missed Approach. - graphical Climb-, Descent- and Full- flightchart. - and lots of more. You can better look the example of the pdf document. Requirements: Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual) Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed. Note: requires paid activation for full use of the Flight Analyzer and Logbook. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen.


Filename: MSFS_P3D_FSX_FS2004_Flight_Analyzer_Utility_FsQC_V.zip
License: Shareware, time limited
Added: 13th November 2020, 00:56:40
Downloads: 236
Author: Evander Tholen
Size: 5.54 MB


Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications
Douglas C-47 (N65276) Frontier Airlines Download

Images related to this file:

File Description:
This folder contains a repaint for version 3.14 of the Douglas C-47 by Manfred Jahn and colleagues in the colors of Frontier Airlines N65276, one of the C-47/DC-3's operated by Frontier Airlines. On April 21, 1957, at 1321 hours, N65276, operating as Frontier Airlines flight 7 departed Prescott, Arizona enroute to Phoenix under visual flight rules (VFR) with 21 passengers and one stewardess. As the flight proceeded southbound toward Phoenix the weather deteriorated to a point where the flight could no longer remain clear of clouds and maintain VFR. Captain Welling requested and received an instrument flight rules (IFR) clearance to proceed to Phoenix via Knob intersection thence to the Phoenix omni range, maintain 7000 feet. The crew never acknowledged receiving the clearance. It is suspected that the reason there was no response is that this was the precise moment that flight 7 struck the west ridge of a mountain at the 4500’ level southeast of Prescott shearing off twelve feet of the left wing and six feet of the left aileron. After declaring an emergency, flight 7 landed safely at Phoenix Sky Harbor airport without further incident. There was no injury to the passengers or crew. The wing was replaced and the aircraft continued flying for Frontier. Sadly, N65276 was lost in a tragic accident in 1967 on a snowy Denver day when a rudder-lock had been placed on an elevator and not removed prior to take-off. Both pilots were killed in the crash. More info, as well as pictures, on these incidents, and an earlier mishap with N65276 can be found here: http://fal-1.tripod.com/FL_Crash.html.Repaint by Jan Kees Blom for Manfred Jahn's C-47 version 3.14, based on the paintkit by Gman5250.


Filename: Douglas_C47_N65276_Frontier_Airlines.zip
License: Freeware
Added: 14th August 2018, 21:34:27
Downloads: 380
Author: Jan Kees Blom
Size: 13.82 MB


Category: Flight Simulator X - Gauges
TCAS and Traffic Display Gauge V2.0 Download

Images related to this file:

File Description:
This TCAS and Traffic Display Gauge Version 2.0 includes significant improvements from V1.0. It has been developed for the FSX Flight Simulator SP1/2 also. It should also work with Acceleration.The functionality for the TCAS part is based on general specs for commercial aircrafts. It does not provide in detail the function for a specific aircraft model. It is a generic gauge, and can be simple added to any aircraft as a standalone popup window. In addition the gauge provides a AI traffic display in the ranges of 10,20, and 40 miles.Within this display mode, no TCAS rules are valid, which means all AI aircraft are displayed independent of any altitude or distance. Improvements in V2.0 are: 1: Full TCAS and traffic display capability is provided even though your aircraft is on the ground. Only the trigger of the alarm/warn sound and the blinking lamp display willbe blocked. 2: An AI HDG pointer will be displayed. It shows in which direction the AI is moving. 3: A bearing pointer has been introduced. It allows the pilot to point to a specific AI.4: The AI additional text info display follows the structure of an ATC text.5:The AI additional text can be selected individually per AI with a mouse click. 6: Each AI display contains a ID index number (0 � 20).7: The design of the TCAS and Traffic Display Box has been updated.8: Increased the number of AIs displayed on the screen in display mode. For installation and functional description look at the doc inside the ZIp. CREDIT goes to : Stefan Schneider for his support on special XML issues and TCAS functionality. Bob Familton for his review of the documentation and testing for SP1 FSX. Doug Dawson for his dsd-XML-sound interface in order to generate the sounds.


Filename: TCAS_and_Traffic_Display_Gauge_V20.zip
License: Freeware
Added: 25th October 2010, 13:37:36
Downloads: 3,755
Author: Dietmar Loleit
Size: 981.32 KB


Prev Page   Next Page
AVSIM Library System Version 3.00 -- 2025-Apr
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |