Category: Flight Simulator X - AFCAD Files
Peaslees Airstrip Airport (NJ25), New Jersey

File Description:
Located 01 miles SW of Clarksboro, New Jersey on 8 acres of land, Peaslees Airstrip is a private turf field 2207' in length. The hard surface runway has been removed to allow for landings on terrain, so have your terrain mesh set as high as possible. The surrounding area of rural farmland and houses has been filled in to provide an encompassing ground environment with as few breaks to the horizon as possible. There are no services at this airport - if you arrive there is room past the hangar to park and tie down although no tie downs are available in real life, thus you can only start from this airport on the runway. The windsock is located approximately midfield of the runway, as in real life. A second hangar has been constructed nearby the current one, but MSE textures do not reflect this and it was not included. This airport is not lit and daytime VFR operations only are recommended. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Peaslees_Airstrip_Airport_NJ25_New_Jersey.zip
License:	Freeware
Added:	20th August 2011, 19:56:22
Downloads:	160
Author:	Drew Sikora
Size:	1 MB

Category: Flight Simulator X - AFCAD Files
Warren Grove Range Airport (NJ24), New Jersey

File Description:
Located 03 miles SW of Burlington County, New Jersey, Warren Grove Range is a private concrete airfield 1800' in length. It is owned by the Department of Defense and exists in a restricted flight area. The bare sand of this area has washed out the satellite images tremendously from over-exposure thanks to reflected sunlight - you can't even make out the runway (which FSX places incorrectly over a mile away). Due to lack of ground definition and primary use as a military facility, this airport has not been developed by MSEAirports and the concrete runway has been removed. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Warren_Grove_Range_Airport_NJ24_New_Jersey.zip
License:	Freeware
Added:	20th August 2011, 19:58:05
Downloads:	174
Author:	Drew Sikora
Size:	153.47 KB

Category: Flight Simulator X - AFCAD Files
Malone Airport (NJ61), NJ

File Description:
Located 02 miles E of Frenchtown, New Jersey on 45 acres of land, Malone is a private airport with two turf strips, the longest of which is 2400' in length. There are no services offered, although there is room next to the existing planes to park if you wish - collisions are disabled with the aircraft. Both runways have their hard surfaces removed so turn your mesh settings as high as possible. Both runways slope down from the hangar/house area. Airport is unlit and daytime VFR operations only are recommended.

Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Malone_Airport_NJ61_NJ.zip
License:	Freeware
Added:	20th September 2011, 13:57:18
Downloads:	284
Author:	Drew Sikora
Size:	958.34 KB

Category: Flight Simulator X - AFCAD Files
Peters Airport (4NJ8), NJ v1.1

File Description:
Located 05 miles W of Somerville, New Jersey on 70 acres of land, Peters Airport is a private turf strip that will test your short field skills to the max. The published runway dimensions for this strip are 1700x200 feet, and for the most case this is fairly accurate - however at the ends of both runways you have tree obstacles to overcome so this can shorten the amount of usable runway significantly, although the tree obstacles are no higher than 12-14m. There is no hardened runway surface so you will be landing/taking off on terrain. Depending on how high your mesh resolution is, this can be a significant factor, as Runway 31 is mainly uphill enough that you will need to power up with parking brakes on if you want to make it in the air. Runway 13 is the best since you are going downhill and the trees at the end are fewer and smaller. Pay close attention to the pattern! Runway 13 is Left and Runway 31 is Right - this airport is within 2 miles of Solberg-Hunterdon (N51) and you don't want to get in the way of that field's traffic! The runway is not lit, so daytime VFR operations only. There are no services at this strip for transient aircraft.

Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Peters_Airport_4NJ8_NJ_v11.zip
License:	Freeware
Added:	20th September 2011, 14:08:43
Downloads:	405
Author:	Drew Sikora
Size:	461.03 KB

Category: Flight Simulator X - AFCAD Files
Somerset Airport (KSMQ), NJ

File Description:
Located 03 miles N of Somerville, New Jersey on 210 acres of land, Somerset is a public airport with one asphalt and two grass runways, the longest of which is 2733' in length. The turf runways have no hard surfaces and you will be landing on terrain so have your mesh set as high as possible - both runways are still selectable in the ATC window for landing/takeoff announcements. AI aircraft will not use them. The helipad is a start location in front of the main terminal if a parking location is not wanted to begin helicopter flights. Parking is divvied up into three categories - GA_SMALL spots will accommodate aircraft with wingspans no greater than 40 feet. GA_MEDIUM spots will accommodate aircraft with wingspans no greater than 60 feet. GA_LARGE spots are named to identify locations suitable for starting in a glider if you wish to do so. They can also accommodate aircraft with wingspans no greater than 60 feet. In addition to tie downs, there are 13 hangars open for parking in various locations - they can be identified by GA_DOCK. Only the N Parking hangar can accommodate aircraft with wingspans no greater than 60 feet - all other hangers are suitable only for aircraft with wingspans no greater than 40 feet. Several of the hangars have attendants - look beside the doors for the NAV2 frequency to set for opening them. AI aircraft will only spawn on the north tarmac/hangars (largely to prevent AI traffic crossing the runway on taxi). All objects and static aircraft in the immediate vicinity of parking and taxiways have collision disabled. If your aircraft has a wingspan greater than 40 feet it is NOT recommended that you taxi down the middle taxiway leading to the main tarmac from N Parking as you will not clear the hangars - go either via the NW taxiway past the grass tie downs (NW Parking) or around East to the next taxi way on the other side of the east hangars (E Parking) which has more wing clearance. Fuel is available on both tarmacs north and south of the runway by stopping on the asphalt in front of the tanks/pump. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Somerset_Airport_KSMQ_NJ.zip
License:	Freeware
Added:	27th September 2011, 01:15:53
Downloads:	306
Author:	Drew Sikora
Size:	1.47 MB

Category: Flight Simulator X - AFCAD Files
Greenwood Lake Airport (4N1), NJ

File Description:
Located 01 miles E of West Milford, New Jersey on 150 acres of land, Greenwood Lake Airport is a public asphalt strip that services small to medium GA air traffic. The second runway that used to be there has been re-paved and now serves as extra aircraft parking. You can park anywhere on the closed runway, along the edge of the main tarmac where the terminal building is, or between any two white cones (50 foot max wingspan) that mark tie-down locations in the middle of the main tarmac. A helicopter start is provided as well. For parking, Small GA spaces are for craft with wingspans of less than 50 feet; Medium GA spaces are for craft with wingspans from 50-60 feet. The glide slope for Runway 24 has been adjusted up from 3.5 degrees to 4 degrees as in real life the runway sits higher than the ground the trees grow from so this will give you proper clearance on approach. Fuel is available by stopping near the tank on the main tarmac. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Greenwood_Lake_Airport_4N1_NJ.zip
License:	Freeware
Added:	22nd July 2011, 03:59:26
Downloads:	479
Author:	Drew Sikora
Size:	1.98 MB

Category: Flight Simulator X - AFCAD Files
Robert J. Miller Air Park Airport (KMJX), NJ

File Description:
Located 05 miles SW of Toms River, New Jersey on 232 acres of land, R.J. Miller Air Park is a public asphalt strip 5949' in length. The airport buildings and immediate surrounding area have been included, magnetic variation adjusted, PAPI properly placed, taxiway lines drawn accurately, beacon properly placed, lit winsock and wind tee (both functional). The parking available has been matched to the current configuration of the airport, which is still undergoing renovation. Not included is the under-construction building just to the south of the terminal and the additional large hangar just north of the already-existing one. Taxiway lighting could not be seen in aerial photos - complete liberty on behalf of the author was taken when placing taxiway lights. Helipad is lit at night although the real world pad is not. Tiedown parking is available on the main tarmac in three sections: Southwest, Northeast, and regular Parking which is in the middle. RAMP_GA_SMALL parking spots are for aircraft with wingspans no greater than 40 feet. RAMP_GA_MEDIUM parking spots are for aircraft with wingspans no greater than 60 feet. RAMP_GA parking spots are occupied/blocked by static objects and should not be chosen as a start location (although collision detection with all such objects has been disabled). There are 4 open hangars - three to the Southwest are for RAMP_GA_SMALL aircraft while the Northeast one is for RAMP_GA_MEDIUM aircraft or smaller. All hangar parking spots are labeled DOCK_GA. A hangar on the main tarmac and a hangar on the tarmac to the south and west removed from the airport have attendants that can be called on NAV2 - this appears to be FS9 only. Both hangars have undecorated interiors and no parking spots to start from. There is only one helipad to start on but helicopters can also start in any RAMP_GA_MEDIUM location with no problem. Fuel for aircraft/helicopters is available by stopping next to the fuel pumps (not the fuel tank) at the north end of the main tarmac. The helipad will supply fuel when landed on. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Robert_J_Miller_Air_Park_Airport_KMJX_NJ.zip
License:	Freeware
Added:	4th August 2011, 21:45:08
Downloads:	372
Author:	Drew Sikora
Size:	2.22 MB

Category: Flight Simulator X - AFCAD Files
Paramount Bistcho, Alberta, Canada

File Description:
The AFCAD (ADE) for Paramount Bistcho was left out of our Sunwest Aviation Summer 2011 flightplan & repaint package. One of the destinations for Sunwest's B1900Ds is Paramount Bistcho in Northern Alberta. It's assigned designator is CPB8 but in both FS9 & FSX CPB8 is given to Rodney, Ontario (which should be CPU3). It is impossible to change a "stock" airport's designator in FS so we have designated Paramount Bistcho as CPB1 which is a designator not used in the real world at this time. Produced with ADE v1.50.01.

Filename:	Paramount_Bistcho_Alberta_Canada.zip
License:	Freeware
Added:	10th September 2011, 16:39:08
Downloads:	176
Author:	Steve Lewis & Darren Belanger
Size:	3 KB

Category: Flight Simulator X - AFCAD Files
KGRB - Green Bay Wisconsin Austin Straubel International U.S.A. - Updated

Images related to this file:

File Description: A complete re-make of the default airport from scratch utilising Airport Design Editor 1.47.11. Newly modeled terminal buildings were added (modeled for the airport in FSDS) and aprons and taxiways adjusted along with new taxi signs and lights added to aprons. Gates are accurately numbered and coded for correct use and all approaches have been re-written to the current Jeppesen plate. Many buildings and airport scenery elements, including a landclass, are incorporated. The file has very specific installation instructions - please read and follow these carefully. Visit us at www.alpha-india.net. This update corrects a compile error for non-crosswind runway users and corrects hangar texture issues on the GA area for all users.

Filename:	KGRB__Green_Bay_Wisconsin_Austin_Straubel_Internat.zip
License:	Freeware, limited distribution
Added:	2nd July 2011, 20:15:04
Downloads:	1,385
Author:	Patrick Finch & Alpha India Group
Size:	1.89 MB

Category: Flight Simulator X - AFCAD Files
KHSV - Updated

File Description:
This is the update of my previous FSX AFCAD for the default airport KHSV (Huntsville-Intl-Jones-Airport) located at Huntsville, Alabama. The AFCAD was modified using ADE v1.37 and includes changes per FAA charts, and as seen from above using Google Earth. The original control tower has been removed, a helipad with night lights and some static aircraft have been added in its place. The real airport does not have a helipad. Also I added a Fire Station and roadways like the real airport. Additional information is included in the AFCAD readme!.txt zip file. This AFCAD has not been tested in Flight Simulator 2004 and you do not need my previous KHSV files for this AFCAD update to work.

Filename:	KHSV__Updated.zip
License:	Freeware
Added:	3rd July 2011, 03:16:57
Downloads:	376
Author:	Leroy Mears
Size:	32.68 KB