Category: Flight Simulator X - AFCAD Files
Marlboro Airport (2N8), NJ

File Description:
Marlboro Airport in Matawan, NJ was closed in 2002. The runway has been modified to reflect its closed status and all taxiways, buildings, etc have been stripped to show satellite textures. FSX doesn't simulate old broken down runways possibly breaking your landing gear so if you still want to hit that with a Touch and Go I'm sure the virtual FAA won't notice.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Marlboro_Airport_2N8_NJ.zip
License:	Freeware
Added:	24th October 2010, 18:52:50
Downloads:	178
Author:	Drew Sikora
Size:	197.29 KB

Category: Flight Simulator X - AFCAD Files
Flying W Airport (N14), NJ

File Description:
Located 01 miles SW of Lumberton, New Jersey on 170 acres of land, Flying W Airport services small to medium GA aircraft as well as helicopters. Transient storage are tie downs only. There are plenty of places to park. The main parking area in on the west side of the airport on the south end of the north tarmac and can handle wingspans of up to 50 feet. You can also park slightly north among the static aircraft or east of the runway on the grass. Collisions are disabled with static craft in these areas to assist with parking. Both 100LL and Jet-A are available by stopping at the south tarmac next to the fuel tank or the north tarmac by the fuel trucks in front of the terminal. Trees are summertime ONLY.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Flying_W_Airport_N14_NJ.zip
License:	Freeware
Added:	24th October 2010, 18:53:47
Downloads:	217
Author:	Drew Sikora
Size:	805.7 KB

Category: Flight Simulator X - AFCAD Files
Atlantic City International Airport (KACY), NJ

File Description:
Located 09 miles NW of Atlantic City, New Jersey on 5000 acres of land, Atlantic City International Airport is a major airport serving the southern portion of New Jersey. It is also one of the main gateways for tourists looking to vacation in nearby Atlantic City, famous for its boardwalks and casinos. This airport has been very heavily modeled with many surrounding buildings and all aprons properly placed. Gates are all properly located and labeled according to the terminal chart (there are, however, no jetways like in the default scenery). General Aviation parking is available in its proper area � all aircraft in the parking area (middle of the tarmac) have collision disabled. If you select Military Cargo parking you will start on one of the helipads in the Coast Guard section. If you select Military Combat parking you will start next to the line of F-16s on ready-alert over on the Air National Guard tarmac. You can also start on a helipad north of the airport. This airport also features completely custom taxiway line and edge lighting. Because this airport uses ATC, it suffers the same bug as my KEWR airport, which is that you cannot receive taxi in directions from ATC � to gate, parking or fuel. Almost all arriving AI aircraft will also disappear from the taxiway after radioing in to ATC and failing to receive taxi instructions to the gate/parking. All traffic and instructions taxiing out works fine. All gate parking spaces have fuel, as well as the military parking and north helipad. GA aircraft can get fuel by taxiing over to the fuel station north of the GA tarmac. Taxiing onto a closed runway (marked with an �X�) will cause a crash. Broken-down taxiways are not good for your undercarriage! Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Atlantic_City_International_Airport_KACY_NJ.zip
License:	Freeware
Added:	1st February 2011, 10:28:53
Downloads:	1,355
Author:	Drew Sikora
Size:	5.12 MB

Category: Flight Simulator X - AFCAD Files
Windward Farms Airport (4NJ0), NJ

File Description:
Located 02 miles NW of Rosemont, New Jersey, Windward Farms Airport is a private turf strip. Like most small private turf strips this one can prove to be slightly challenging when it comes to taking off and landing - especially in a crosswind. The runway threads between two separate stands of trees to either side, and 1/4 of the Runway 11 left side is hedged by small trees and bushes. While the published dimensions for this strip are 3500x150 feet, in reality the usable runway space is really 3000x100 feet due to vegetation. This airport as rendered in FSX does not have an actual runway surface, so when you land you will be landing on actual terrain. There isn't a noticeable slope but it can be bumpy so use caution! Edge lighting is provided for the runway, although night landings/takeoffs are not recommended. There are no services provided by this airfield. After landing why not taxi over to the hangar and feed the sheep grazing in the pasture? Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Windward_Farms_Airport_4NJ0_NJ.zip
License:	Freeware
Added:	1st February 2011, 10:29:23
Downloads:	201
Author:	Drew Sikora
Size:	563.16 KB

Category: Flight Simulator X - AFCAD Files
Herr Mountain Airport (5NJ2), NJ

File Description:
Located 02 miles N of Stanton, New Jersey, Herr Mountain Airport is a private turf strip. No aircraft are based here, so don't expect much except for ample room to land and take off again. There is a residence on the property, but no hangar or storage facilities. The runway is 2800x100 feet so not too hard to arrive and depart from. Approaching Runway 25 can be a slight challenge given that you need to level off your descent to cross over a mountain top before diving in to land. There is no hard surface runway, so you will be landing on terrain - be gentle! It's recommended to have your mesh complexity set as high as possible to get the full effect. The runway is not lit so daytime VFR operations only are allowed at this airport. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Herr_Mountain_Airport_5NJ2_NJ.zip
License:	Freeware
Added:	1st February 2011, 23:06:28
Downloads:	187
Author:	Drew Sikora
Size:	422.37 KB

Category: Flight Simulator X - AFCAD Files
Thomas Browne Airpark Airport (61NJ), NJ

File Description:
Located 02 miles W of Glassboro, New Jersey, Thomas Browne Airpark Airport is a private turf strip 2000��80 feet. There is no hard-surfaced runway, which means you will be landing on terrain so it is recommended you set your mesh resolution as high as possible. Watch out for trees and buildings alongside and at opposite ends of the runway. Crop fields are planted to the south of the runway and border the runway. You won't crash if you run into them but it certainly won't put you in good favor with the field owners! Take caution to avoid the transmission line towers as they are not lit at night! Neither is the runway, for that matter, so daytime VFR operations only are recommended for this airfield. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Thomas_Browne_Airpark_Airport_61NJ_NJ.zip
License:	Freeware
Added:	4th February 2011, 02:47:24
Downloads:	166
Author:	Drew Sikora
Size:	1.41 MB

Category: Flight Simulator X - AFCAD Files
Mount Pleasant Landing Strip Airport (67NJ), NJ

File Description:
Located 01 miles S of Hainesburg, New Jersey on 192 acres of land, Mount Pleasant Landing Strip Airport is a private turf field. The strip itself is 2100 feet in length over fairly level ground. There is no hard-surfaced grass runway in place, so setting your mesh to the highest resolution is recommended as you will be landing on bare terrain. Next to Runway 06 is a path through the trees you can taxi along to get to a hangar - although it is not available for transient aircraft and is closed. Collision with the trees along the path near the hangar and the static aircraft parked near it is disabled to make it easier to move through this relatively tight area. Immediately beyond the hangar is a clearing with ample room to turn around to taxi back out. You can also start parked in front of the hangar. The windsock is located a few feet west of the hangar and is not lit. The runway also has no edge lighting so daytime VFR operations only are recommended for this airfield. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Mount_Pleasant_Landing_Strip_Airport_67NJ_NJ.zip
License:	Freeware
Added:	7th February 2011, 23:49:26
Downloads:	198
Author:	Drew Sikora
Size:	468.64 KB

Category: Flight Simulator X - AFCAD Files
Correction of Taxiway signs for Aerosoft's Mega Airport Frankfurt (EDDF) according to new ground layout 2010

Images related to this file:

File Description: In 2010 Fraport introduced alphanumerical taxiway designators for EDDF. Hence almost all taxiway signs needed to be modified. Unfortunately the present Aerosoft scenery does not reflect this change. The BGL included allows you to update your MAF scenery to the current state. This addon of course does not contain the Aerosoft scenery itself!

Filename:	Correction_of_Taxiway_signs_for_Aerosofts_Mega_Air.zip
License:	Freeware
Added:	26th February 2011, 22:34:21
Downloads:	1,306
Author:	Michael Henseler
Size:	8.88 KB

Category: Flight Simulator X - AFCAD Files
Correction of ILS 08R frequency in Leipzig (EDDP) for Aerosoft Scenery

File Description:
In November 2009 the frequency of the localizer 08R EDDP changed from 111.9 to 111.750. The supplied BGL file will apply this change to Aerosoft's German Airports 2 X and Leipzig X for MS Flight Simulator X. This addon of course does not contain the Aerosoft scenery itself!

Filename:	Correction_of_ILS_08R_frequency_in_Leipzig_EDDP_fo.zip
License:	Freeware
Added:	26th February 2011, 22:38:21
Downloads:	751
Author:	Michael Henseler
Size:	43.84 KB

Category: Flight Simulator X - AFCAD Files
Fly-N-D Landing Strip Airport (92NJ), NJ

File Description:
Located 01 miles E of Kingwood Township, New Jersey on 121 acres of land, Fly-N-D Landing Strip Airport is a private turf field with a 2200' runway. There is no hard surface runway so setting your mesh as high as possible will lead to the best effects of landing on terrain. No transient storage or services are offered, and the airfield is not lit, so daytime VFR operations are recommended only.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.

This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	FlyND_Landing_Strip_Airport_92NJ_NJ.zip
License:	Freeware
Added:	23rd March 2011, 13:33:27
Downloads:	174
Author:	Drew Sikora
Size:	474.94 KB