Category: Flight Simulator X - AFCAD Files
Mock Airport (3NJ5), NJ

File Description:
Located in Flemington, New Jersey, Mock Airport is a closed airstrip. Nowhere in the area could I find anyplace suitable for the grass strip FSX insists belongs there, and the airport has been removed from aviation databases. This scenery simply removes the grass strip so it's not sticking out atop the ground textures. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Mock_Airport_3NJ5_NJ.zip
License:	Freeware
Added:	23rd November 2010, 01:13:00
Downloads:	161
Author:	Drew Sikora
Size:	211.55 KB

Category: Flight Simulator X - AFCAD Files
Pemberton Airport (3N7), NJ

File Description:
Located 01 miles NW of Pemberton, New Jersey on 14 acres of land, Pemberton Airport is a private airstrip. Tie down areas are available at the Runway 22 end. The single parking space is a tie down - do not use if your aircraft's wingspan is greater than 50 feet. Note that the actual listing for this airport in real world databases is 3NJ1. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Pemberton_Airport_3N7_NJ.zip
License:	Freeware
Added:	23rd November 2010, 22:32:59
Downloads:	184
Author:	Drew Sikora
Size:	1.12 MB

Category: Flight Simulator X - Scenery
KAGC Allegheny County Airport. West Mifflin, PA.

File Description:
KAGC Allegheny County Airport is a complete work from scratch. I used google earth to hand place all new buildings in great detail. You will need to cruise around this one to truly enjoy the detail. All ILS/NAV correct acording to AIRNAV. Runways are correct length and width. I tried to keep the detail level real but had to keep some buildings and hangars out so the frame rate impact was low. But this airport will be a great addition to the General Aviation crowd. Enjoy, Rob.

Filename:	KAGC_Allegheny_County_Airport_West_Mifflin_PA.zip
License:	Freeware
Added:	23rd November 2010, 23:58:01
Downloads:	701
Author:	Rob Touchtone
Size:	141.07 KB

Category: Flight Simulator X - AFCAD Files
Central Jersey Regional Airport (47N), NJ

File Description:
Located 01 miles S of Manville, New Jersey on 119 acres of land, Central Jersey Regional Airport is a public asphalt strip. Hangars and tiedowns are offered for transient craft. The open hangar at the north of the airport is available for parking - it can be a bit of a tight fit taxiing in so I have disabled collision with the two planes nearby. You can also select the DOCK parking space to start inside the hangar. Fuel is available on the north tarmac by the fuel truck in front of the hangar, and on the south tarmac by the fuel tank. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Central_Jersey_Regional_Airport_47N_NJ.zip
License:	Freeware
Added:	25th November 2010, 14:15:25
Downloads:	295
Author:	Drew Sikora
Size:	1.92 MB

Category: Flight Simulator X - AFCAD Files
Perl Acres Airport (46NJ), NJ

File Description:
Located 02 miles S of Clarksburg, New Jersey on 5 acres of land, Perl Acres Airport is a private turf strip. No transient services are offered. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Perl_Acres_Airport_46NJ_NJ.zip
License:	Freeware
Added:	25th November 2010, 14:15:41
Downloads:	183
Author:	Drew Sikora
Size:	759.75 KB

Category: Flight Simulator X - AI Aircraft
Cubana Boeing 737-800

File Description:
Powerplants � 737-800 - Two 107.6kN (24,200lb) CFM56-7B24s, or two 121.4kN (27,300lb) CFM56-7B27s on high gross weight versions. 737-900 - Two 117kN (26,300lb) CFM56-7B26s, or 121.4kN (27,300lb) or 121.4kN (27,300lb) CFM56-7B27s in high gross weight versions. Performance� � � �  � Typical cruising speed Mach 0.785. Max certificated altitude 41,000ft.�  737-800 - Standard range with 162 passengers 3585km (1990nm) or 5445km (2940nm) for high gross weight version.�  737-900 - Standard range with 177 passengers 3815km (2060nm), high gross weight version 5083km (2458nm). Weights� � � �  � 737-800 - Operating empty 41,145kg (90,710lb), max takeoff 70,535kg (155,500lb), high gross weight max takeoff 79,015kg (174,200lb). 737-900 - Operating empty 42,493kg (93,680lb), max takeoff 74,840kg (164,000lb), high gross weight max takeoff 79,015kg (174,200lb). Dimensions� � � �  � 737-800 - Wing span 34.31m (112ft 7in), length 39.47m (129ft 6in), height 12.55m (41ft 2in). Wing area 125.0m2 (1344sq ft). 737-900 - Same except length 42.11m (138ft 2in). Capacity� � � �  Flightcrew of two.�  737-800 - Typical two class seating for 162 with 12 first class passengers at four abreast and 91cm (36in) pitch and 150 economy class at six abreast and 81cm (32in) pitch. Max single class seating for 189 at 76cm (30in) pitch. 737-900 - Typical two class seating for 177, with 12 first class at four abreast and 91cm (36in) pitch, max seating for 189 in a single class at 81cm (32in) pitch. Production� � � �  � 737-800 - 1028 ordered (including 8 BBJ-2s), with 664 (including 7 BBJ-2s) delivered by October 2002. 737-900 - 49 ordered, with 29 delivered by October 2002.

Filename:	Cubana_Boeing_737800.zip
License:	Freeware
Added:	25th November 2010, 14:16:53
Downloads:	418
Author:	JCGregori
Size:	4.57 MB

Category: Flight Simulator X - AFCAD Files
Inductotherm Airport (3NJ6), NJ

File Description:
Located 01 miles E of Rancocas, New Jersey, Inductotherm Airport is a private airstrip. No storage is offered for transient aircraft, although there is ample room on the tarmac if you wish to park there. You can also start from a parking spot - wingspans greater than 50 feet must start on the runway. 100LL fuel available by stopping near the fuel tank, Jet-A fuel available by landing near the fuel truck. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Inductotherm_Airport_3NJ6_NJ.zip
License:	Freeware
Added:	25th November 2010, 14:18:37
Downloads:	187
Author:	Drew Sikora
Size:	1.16 MB

Category: Flight Simulator X - AFCAD Files
Westbrook Airport (3NJ9), NJ

File Description:
No idea what this airport is - no registries list it and even Google doesn't find it. The actual 3NJ9 is Allen Airstrip Airport, a private turf strip dozens of miles south of where FSX thinks this strip is. This strip in FSX is actually right next to Hill Top Airport (JY43) - which is a private asphalt strip that isn't included in FSX. I will probably add that airport when I get to it. I tried removing this strip and changing the airport location to Allen Airstrip but that just makes the default strip override the new one. So I've simply left it where it is and removed the runway. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Westbrook_Airport_3NJ9_NJ.zip
License:	Freeware
Added:	25th November 2010, 14:18:44
Downloads:	189
Author:	Drew Sikora
Size:	192.97 KB

Category: Flight Simulator X - AFCAD Files
Punta Raisi Airport - LICJ - Palermo, Italy

File Description:
This airport was designed with the latest version of ADE(v1.47) and made only for the FSX default airport: one file with the Crosswind rwy activated and in full operation, now activated by ADE where both runways will be used for takeoff/landing and one file as the default runway operation: assigned parking with extra parking, extra fuel trucks, support vehicle roads rebuilt, helipad and many other improvements, airport views are from the roof of the control tower (when in tower view) please view the readme before installation

Filename:	Punta_Raisi_Airport__LICJ__Palermo_Italy.zip
License:	Freeware
Added:	6th August 2010, 00:43:28
Downloads:	3,439
Author:	Ray Smith
Size:	33.58 KB

Category: Flight Simulator X - AFCAD Files
M1DG Oakland Airport

File Description:
FSX AFCAD--M1DG Oakland Airport update (KOAK), Metropolitan Oakland International Airport, California (CA).

Filename:	M1DG_Oakland_Airport.zip
License:	Freeware
Added:	6th August 2010, 22:18:17
Downloads:	488
Author:	Salvador Godoy
Size:	150.82 KB