Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Scenery | |
| RAF Elsham Wold |
|
File Description:
In the late 1930s with a new war on the horizon, extra airfields were again needed to accommodate an expansion of the RAF. Former First World War stations were surveyed for suitability, and an area just to the west of the original Elsham site was deemed to be better suited. work began in the winter of 1939-1940, and the station opened with the arrival in July 1941 of 103 Squadron. The station was equipped with a main runway 2,000 yards (1,829 m) long, and two subsidiaries of 1,600 yards (1,463 m) and 1,400 yards (1,280 m). Three hangars (two T-2's and one J-Type) and 27 aircraft hardstands (later increased to 36) were built. Three more T-2 hangars were built in 1944. Accommodation for around 2,500 personnel was dispersed in the nearby farmland.
No. 103 is credited with more operational sorties than any other 1 Group squadron, and consequently suffered the group's highest losses. Of the 248 bombers lost on operations flying from Elsham Wolds, 198 were from No. 103 Squadron. By type, losses were 28 Vickers Wellingtons, 12 Halifaxes and 208 Lancasters. One Elsham Wolds Lancaster, Lancaster III ED888 M2 (Mike Squared)[3] which served with both Nos. 103 and 576, held the Bomber Command record for operational sorties, having completed 140 between May 1943 and December 1944.[4] A total of 974 operational hours. Source: Wikipedia.
| Filename: | RAF_Elsham_Wold.zip |
| License: | Freeware |
| Added: | 17th October 2015, 10:26:14 |
| Downloads: | 333 |
| Author: | Terry Boissel |
| Size: | 17.4 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FSX/P3D/FS2004 Trinidad and Tobago Air Services DC-6B 1978 |
|
Images related to this file:
File Description:
This is a repaint of the Douglas DC-6B in Trinidad and Tobago Air Services - TTAS colors. The freeware CalClassic DC-6B by Greg Pepper and Tom Gibson is needed for this repaint. Trinidad and Tobago is an island nation of the southeastern West Indies, in the Caribbean. It consists of two main islands — Trinidad and Tobago — and several smaller islands. Caribbean United Airlines Ltd. was the main carrier operating a service from Trinidad, the main island, to Tobago, which is off to the North of Trinidad. However, Caribbean United Airlines - established in 1970, failed as an airline and stopped operations in 1974. The government of Trinidad and Tobago consequently formed TTAS at Port of Spain on June 12, 1974 to take over the Port of Spain to Tobago service suspended upon the failure of Caribbean United Airlines. With a pair of Douglas DC-6Bs, TTAS, became the second national carrier, and undertook air bridge flights to Tobago, as well as routes to Grenada, Martinique, and St. Lucia. The DC-6Bs were replaced between 1977 and 1978 by HS-748s. After a short lifespan of 6 years, TTAS was taken over and merged into the main Trinidad and Tobago national carrier - British West Indies Airways, in 1980. Textures are 32bit bmp. This repaint was tested on FSX-SE and should work on FSX & P3D v1-3. It should also work on FS2004.
| Filename: | FSXP3DFS2004_Trinidad_and_Tobago_Air_Services_DC6B.zip |
| License: | Freeware |
| Added: | 24th June 2019, 16:57:14 |
| Downloads: | 106 |
| Author: | Ted Giana |
| Size: | 7.53 MB |
| Category: Flight Simulator X - Utilities | |
| PJEZFSX |
|
File Description:
PETER JAMES' EZCAM .CAM FILES AS OF 3-25-10. I have made some great cams to share based on the new
Flight1 EZDOK software. Installation is a snap. Just copy these into your EZDOK root directory and you're
ready to go! As a real commercial pilot with over 7500 hours flying time, I can assure you these cams
give you the most realistic virtual cockpit views possible. I base this on proper seat position, as
well as a zoom level I have been fiddling with since the beginning of FSX.
I have here cams for the A319 by Project Airbus, the Default A321, default Beaver, the 739 by Ariane, the LDS 767-300ER,
and the great free biplane (Tigermoth) by ORBIX ...Whether you own the two payware products or not
does not matter. These cams will work well on any similar aircraft. Just use the EZDOK interface to import these cams,
and then you can edit them for any plane you want. The real thing I did was take the default cams that came with EZDOK and dampen
out the touchdown head wobble...but that's about it. I am still learning all the tweaks available
with vibrational effects, but have gotten good at setting up 9 viewpoints for each virtual cockpit
included... when you run the EZDOK interface you'll see the titles and number key for each position.
Enjoy!
Peter James / [email protected]
| Filename: | PJEZFSX.zip |
| License: | Freeware |
| Added: | 25th March 2010, 06:23:33 |
| Downloads: | 2,533 |
| Author: | Peter James |
| Size: | 16.85 KB |
| Category: Flight Simulator X - Gauges | |
| V-One Gauge for Milviz Boeing 737-200 v2.0 |
|
File Description:
The following changes are in this version release:
1) All pilot/co-pilot call-outs replaced
2) V-One XML code and sound file logic updated
3) Altitude Call-Out XML code re-written & optimized
4) Corrected setting of Airspeed Cursor when SP177 is in use during approach phase
5) Added Call-out sound toggle for: 'All', 'Altitude' or 'Off' (box in upper right of Data Card)
6) Added 'Current %N1' display to Data Card
List of features: Approximately 40 sounds integrated into gauge. Take-off V-Speeds calculated for Flaps 1, 2, 5, 10, 15 or 25 including temperature and altitude correction. Take-off speed bugs and command speed bug automatically set for: V1, Vr, V2, V2 + 15 and flaps-up maneuvering speed (clean speed). Optimum altitude and optimum EPR (EPR calc for M.74) continually calculated. Flap mis-configuration is displayed in text. Tooltip indicates overweight value (LB/KG). Take-off trim calculated for current gross weight. Current Altitude, EPR, Speed (knts), Flaps and Trim displays via toggle. Display units can be toggled between LB and KG (default LB). Re-settable flight timer. Re-settable fuel use. Selectable Vref landing configurations, Vref15, Vref30 (default) or Vref40. Approach / landing speed bugs and Command speed bug automatically set for: Vref, Vref + 5, Vref + 15 and flaps-up maneuvering speed (clean speed). ZFW, Fuel, CG, Gross Weight and Barometric Pressure MSL (QNH) displayed.
| Filename: | VOne_Gauge_for_Milviz_Boeing_737200_v20.zip |
| License: | Freeware, limited distribution |
| Added: | 1st November 2015, 18:35:29 |
| Downloads: | 2,440 |
| Author: | Paul Tally |
| Size: | 4.11 MB |
| Category: Flight Simulator X - Scenery | |
| North Central Ecuador v3, including SEQM (SEQU) and SEIB |
|
Images related to this file:
File Description:
FSX/P3D Version 3 of this scenery is a completely new build of SEQM from the ground up. The entire complex is rendered using FSX objects along with the new highway that connects to the highway infrastructure with AI road traffic. The airport is now at a mean altitude that better blends with the newly included NASA SRTM GL1 30m mesh for the region. The tower is at the correct altitude. Buildings use more accurate footprints, new models, floating jetways, and updated landclass, and work seamlessly with the roads added by FTX Global/Vector. Lakes are corrected within roughly 100 square miles. Although the Ibarra/Atahualpa (SEIB) airport no longer exists, there is an option to add it back. Startup files are included to fly from the lakes and the Ibarra/Atahualpa (SEIB) airport. As a “bonusâ€, SEQU was restored in this version, because much of the footprint of the airport still remains as part of its conversion to a park. As such, a custom and fully functional SEQU is included for users who would like to revisit the old airport. AI Traffic can be restored at SEQU by simply using the "Reversed SEQU-SEQM AI Traffic" option. Scenery was created using Airport Design Editor X v1.76.6715, SBuilderX 3.13, and the FSX Object Placement Tool. Scenery objects were added and modified from stock FSX scenery to resemble as closely as possible the actual airport. Bill Leaming's Ramp Lights for P3D/FSX illuminate the aprons.
| Filename: | North_Central_Ecuador_v3_including_SEQM_SEQU_and_S.zip |
| License: | Freeware |
| Added: | 22nd March 2020, 22:13:37 |
| Downloads: | 4,107 |
| Author: | Carlyle Sharpe |
| Size: | 29.44 MB |
| Category: Flight Simulator X - AI Aircraft | |
| AI Lineas Aereas Azteca Htai Bombardier Learjet 31 XA-OLE |
|
Images related to this file:
File Description:
This is the aircraft of the extinct mexican airline "Lineas Aereas Azteca", the Bombardier Learjet 31 with the registration: XA-OLE. LÃneas Aéreas Azteca was an airline based in Mexico City, Mexico. It operated domestic scheduled services and international services to the USA. Its main base was Mexico City International Airport, with a hub at General Abelardo L. RodrÃguez International Airport, Tijuana. The airline was established on 9 May 2000 and started operations on 1 June 2000, operating domestic services with Boeing 737 aircraft. It started up after TAESA closed down and some of the staff and assets were taken over. The airline's operations were suspended by the government in March 2007 due to safety problems, and in October 2007 the Mexican government permanently revoked its air operator's certificate because the company hadn't solved those problems. On 10 October 2007, the General Civil Aeronautics Directorship (DGAC) of Mexico's Communications and Transport Secretariat permanently revoked LÃneas Aéreas Azteca's air operator's certificate, because the airline did not have a sound financial statement after the previous suspension. The fleet consisted in 6 Boeing 737-300 (XA-AAU, XA-AAV, XA-CAS, XA-TWG, XA-UCL, XA-UCP), 3 Boeing 737-700 (XA-AEP, XA-AEQ, XA-TWF), and 1 Bombardier Learjet 31 (XA-OLE). The models of this traffic are HENRY TOMKIEWICZ AI (HTAI) Bombardier Learjet 31. This is my website: https://el-mundo-de-los-aviones-ai-traffic.jimdosite.com I hope you enjoy it!
| Filename: | AI_Lineas_Aereas_Azteca_Htai_Bombardier_Learjet_31.zip |
| License: | Freeware |
| Added: | 29th May 2023, 21:00:06 |
| Downloads: | 72 |
| Author: | Jesus Gibran Soriano Solleiro |
| Size: | 23.97 MB |
| Category: Flight Simulator X - Utilities | |
| FSX SDK Toolbox |
|
File Description:
The FSX SDK ToolBox is a handy application for those of us who need to delve again and again into the SDK for Microsoft's new release of Flight Simulator X. It's basically an in-house tool used by TweakFS and we thought it would be nice to make it available to other FS developers as well as the general simming community. Quick links to frequently-accessed key FSX folders such as the Main FSX, ApplicationData and MyDocuments folders are also included, as are direct links to major FSX configuration files like fsx.cfg, scenery.cfg, dll.xml, exe.xml files and many more. It also includes an integrated GUID generation tool that can create single or multiple GUID lists for use with Cameras and Missions.
Mmain Features: 1) FSX SDK Browser, 2) Web Browser, 3) Browser supports HTML, DOC, RTF, TXT, XML & PDF documents, 4) The browser will also support images: JPG, GIF, PNG, SWF and BMP, 5) Direct Folder Links to Several Key FSX folders, 6) Ability to add unlimited Custom Folder Links, 7) Code Editor with File Explorer and Syntax Highlighting, 8) Direct Links to 16 Key FSX files (e.g. DLL.XML, SimConnect.Cfg, etc), 9) Ability to add unlimited Custom File Links, 10) Tool to Quickliy Enable/Disable Key FSX files (DLL.XML, EXE.XML, SimConnect.XML), 11) Tool for generating single and multiple GUIDs (for Cameras and Missions) 12) Six Themes to choose from (Win XP, Vista, Mac OS, MSN, MP 10 and Longhorn).
| Filename: | FSX_SDK_Toolbox.zip |
| License: | Freeware |
| Added: | 14th December 2007, 02:09:17 |
| Downloads: | 3,795 |
| Author: | TweakFS (Fermin Fernandez) |
| Size: | 1.04 MB |
| Category: Flight Simulator X - AI Aircraft | |
| Aerolineas Damojh Boeing 737-200 Advance Full Fleet Pack |
|
Images related to this file:
File Description:
This are the aircrafts of the extinct mexican charter airline Aerolineas Damojh, the Boeing 737-200Adv full fleet pack contain the next airlines and aircrafts that used the Aerolineas Damojh aircrafts and paints with the registrations:
Conviasa: XA-TWR (With Albine Livery), XA-UBB (With Global Air livery and Conviasa Tail Logo).
Global Air: N213PP, XA-TWR (With Acapulco Fest 2002, Acapulco Fest 2003, Acapulco Fest 2005, Bunbury, New Colors, Old Colors, and White Colors), XA-UBB
(New Colors, Old Colors, and United Airlines Albine), XA-UHY (With Blue Tail, New Colors, No Tail Logo), XA-UHZ (With Benin Golf Air, Big Easy Sky Titles,
Aero Caribbean, EasySky, National Airways Cameroon (Nacam), New Colors, Small EasySky Titles), XA-UKW (With Dark Blue Engines, and Sol America), XA-UMP,
XA-UMQ (With Albine Colors, Corona Sunsets, SNTS2011 Sticker, Tail Logo, Top Air), YV206T.
Sinami: XA-TWR, XA-UHZ, XA-UMQ
Aerolineas Damojh ceased operations in 2019 after the accident in "La Habana Cuba" were it crashed the XA-UHZ in take off maneuvers, moving all the operations and the new aircrafts "Boeing 737-5Y0" to Ecuador, abandoning all the 3 "Boeing 737-200Adv" that were from this airline, they were "XA-UHY", "XA-UMQ", and "XA-TWR". AerolÃneas Damojh, S.A. de C.V. is the official name of this company, the commercial name that had was "Global Air". The models of this traffic are FSX AI BUREAU (FAIB) Boeing 737-200 Passenger. This is my website: https://el-mundo-de-los-aviones-ai-traffic.jimdosite.com I hope enjoy it!
| Filename: | Aerolineas_Damojh_Boeing_737200_Advance_Full_Fleet.zip |
| License: | Freeware |
| Added: | 25th June 2022, 15:57:48 |
| Downloads: | 69 |
| Author: | Jesus Gibran Soriano Solleiro |
| Size: | 211.15 MB |
| Category: Flight Simulator X - Utilities | |
| FSX Zip Utility |
|
File Description:
FSX Zip is a useful tool for unpacking Zip files downloaded from FS file libraries without the need for an existing 3rd-party Zip application, but the big handy feature is that it has a tree display of the Zip folder structure giving you a clear view of how the files will unpack and into which location. This folder layout display is also be useful for developers creating Zips to distribute their own work and aids in checking that no files are missing from the archive. It is "FSX aware" and can automatically detect the FSX folder location. Due to this feature it has several handy folder location presets making it quick and easy to install aircraft, scenery and other add-ons which come in Zip files that include folder path information. Many Zip files downloaded from FS libraries have a specific folder structure which the author has included and is required so all files go into their correct locations, and with this utility generally all you will need to do is: 1) Drag and Drop the Zip file onto the "Extract Zip" page, 2) Select the "Extract & Preserve Folder Structure" option, 3) Check the "Extract to Specific FSX Folder" option, 4) Select the preset folder location from the drop-down box and 5) Click the "UnZip" button. It has a small file size when zipped (around 940 KB) and can be freely distributed by freeware/commercial developers to help users install their files. The Create Zip tab also supports Zip Comments for adding any other information such as copyright notices.
| Filename: | FSX_Zip_Utility.zip |
| License: | Freeware |
| Added: | 14th December 2007, 02:08:34 |
| Downloads: | 2,471 |
| Author: | TweakFS (Fermin Fernandez) |
| Size: | 963.79 KB |
| Category: Flight Simulator X - AFCAD Files | |
| MRLB - Daniel Oduber Quiros International Airport / Liberia, Guanacaste, Costa Rica |
|
Images related to this file:
File Description:
MRLB - Daniel Oduber Quiros International Airport / Liberia, Guanacaste, Costa Rica.
This airport update was made with the latest version of ADE (Airport Design Editor) and made for FSX as a replacement for the stock (default) airport. I found that most stock airports in FSX lack a decent amount of character and realism and I've tried to fix that a little bit. The stock airport file for the Liberia airport was sub par to say the least. There were absolutely no parking spots for commercial aircraft and no terminal buildings.
I've done major reworking to this airport and added the brand new terminal, which opened several months ago, I hope you enjoy. Below is a list of changes/additions. All these enhancements are as close to the real airport as I can get with stock library objects. I've used satellite images, terminal photos and maps throughout the whole process so building locations are as accurate as possible. Happy landings in Costa Rica!
Features:
*Greatly expanded parking apron
*Old terminal building added with GA parking area
*Brand new terminal building added with its 4 jetways and 3 additional ramp parking spots
*Parking lots with static vehicles
*Small current construction area
*Road that connects the airport to the main highway w/ static vehicles
*Hilton Garden Inn hotel south of runway 25
*Static vehicles and GA aircraft on the ramp
*Fire station
*Birds in the vicinity of the airport
| Filename: | MRLB__Daniel_Oduber_Quiros_International_Airport__.zip |
| License: | Freeware |
| Added: | 12th July 2012, 16:35:27 |
| Downloads: | 879 |
| Author: | Jaison Diaz |
| Size: | 7.63 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |