Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Scenery | |
| Lost River ASU Observatories |
|
Images related to this file:
File Description:
This is a fictitous scenery of the Alaska State University operated North-Western observatories.
It is located near LSR_Lost River and AK45_Lost River_2 on the Western coast of Alaska.
LSR, AK45 and KPC_Port Clarence have been upgraded with hangers and various objects.
LSR, AK45 and the (2) mountain top observatories have been upgraded with helipads along with various ground vehicles including snocats, aircraft, misc buildings and hangers. The main observatory complex has a main rooftop pad and a heli-tower. These helipads were designed for heli practice. some are on the ground and others are a bit more challenging.
There is a map included which shows the locations of the observatory complexes in relation to the airports. There is also a small research facility located to the east which is indicated on the map. This fictional scenery was design with default FSX 3D objects and (1) addon library, fa_ez-arctic_set by Finney Air, Robert Finnegan.
| Filename: | Lost_River_ASU_Observatories.zip |
| License: | Freeware |
| Added: | 11th November 2009, 19:11:39 |
| Downloads: | 557 |
| Author: | Tim Durham |
| Size: | 3.41 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Malone Airport (NJ61), NJ |
|
File Description:
Located 02 miles E of Frenchtown, New Jersey on 45 acres of land, Malone is a private airport with two turf strips, the longest of which is 2400' in length. There are no services offered, although there is room next to the existing planes to park if you wish - collisions are disabled with the aircraft. Both runways have their hard surfaces removed so turn your mesh settings as high as possible. Both runways slope down from the hangar/house area. Airport is unlit and daytime VFR operations only are recommended.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Malone_Airport_NJ61_NJ.zip |
| License: | Freeware |
| Added: | 20th September 2011, 13:57:18 |
| Downloads: | 284 |
| Author: | Drew Sikora |
| Size: | 958.34 KB |
| Category: Flight Simulator X - Gauges | |
| Turboprop Engine Panel for FIP |
|
Images related to this file:
File Description:
For Saitek Pro Flight Instrument Panel.This is folder contains 2 panels for aircraft fitted with turboprop engine. The two panels are identical except for the number of needles, 1_turboprop_engine.xml is for aircraft with only one turboprop engine and shows a single needle for each engine parameter. 2_turboprop_engine.xml is for aircraft with two turboprop engines and
shows therefore two needles for each engine parameter, one needle for left engine (default is blue colour) and one needle for the right engine (default is pink colour).
The package includes a serie of colour needles that can be changed easily (read the pdf document).
Both panel provide: Torque, ITT, Fuel flow, Fuel quantity for left and right tanks, Propeller RPM (NP), High pressure turbine rotation (NH), Oil temperature, Oil pressure, Flaps position with a needle and in degrees,Pitch, Rudder and Aileron trims in degrees, Gears down green light, Gears in transit red light, Yellow reverse flag.
| Filename: | Turboprop_Engine_Panel_for_FIP.zip |
| License: | Freeware |
| Added: | 3rd March 2012, 03:26:53 |
| Downloads: | 423 |
| Author: | Philippe Verhaege |
| Size: | 547.84 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Myanmar Airways ATR42-320 |
|
File Description:
Myanmar Airways, the state owned national carrier was formed in the year 1948, with the name of " Union Of Burma Airways".
The domestic schedule flights were commenced in 1948, with (9) seater (6) De Havilland Dove aircrafts and was initially flying to 19 stations.
The external schedule flights were operated to Bangkok, Calcutta and Chittagong in 1950.
The airline was reformed as a board under the union of Burma Airways Acts of 1952, according to the international schedule flight extension program.
The flights were operated to Singapore, Kathmandu and later to Bangkok, Calcutta, Dhaka, Hongkong and Jakarta until 15 August 1993.
In 1989 it was renamed Myanma Airways(MA) with the new image logo. Three pillars of MA are Safety, Service and Image. Currently the daily domestic schedule flights are operating to (21) destinations.
Up to date,Myanma Airways has 3 Fokker F28s(replacing with ERJ190 in 2012/13),2 ATR72-200s,1 ATR42-300,3 MA60s and 2 Beechcraft 1900Ds.
| Filename: | Myanmar_Airways_ATR42320.zip |
| License: | Freeware |
| Added: | 14th December 2012, 09:43:06 |
| Downloads: | 90 |
| Author: | Phyo Pyae Sone |
| Size: | 1.86 MB |
| Category: Flight Simulator X - Scenery | |
| YYWG Yarrawonga Airport Victoria Australia |
|
Images related to this file:
File Description:
Airport YYWG Yarrawonga is a regional airport in Victoria Australia. IMPORTANT NOTE This is the third version of this scenery. The main difference is it includes all the textures for the libraries of objects used. The missing textures in the first/second version (and the first version of Echuca) caused problems with other sceneries using the same libraries/objects. There is large number of hangers a training school and some private residentual lots with direct access to the taxiways. These files are for Flight Simulator X. Made using Airport Design Editor using some objects borrowed from Robert Budd's excellent Baccus Marsh. The standard airport bears only a passing resemblance to the real thing so this scenery is a big improvement and accurately reproduces real world. RECOMMENDED The scenery is designed to interface with ORBX FTX_AU scenery for Australia (payware). It will work without ORBX but will interface as well with standard scenery.
| Filename: | YYWG_Yarrawonga_Airport_Victoria_Australia.zip |
| License: | Freeware |
| Added: | 1st October 2017, 18:02:20 |
| Downloads: | 556 |
| Author: | Colin Jeffery |
| Size: | 2.02 MB |
| Category: Flight Simulator X - Utilities | |
| NumberPad Control for FSX and P3D |
|
Images related to this file:
File Description:
NpC4FSX&P3D (NumberPadControl for FSX and P3D) is a more efficient (and more convenient to set up)
version of a similar NpC program that I wrote a few years ago and which to
my surprise PC Pilot magazine included on their 100th Anniversary edition Freeware CD. With
NpC4FSX&P3D you assign keys to functions like Com, Nav, Heading, Course, Altitude, VS,
Autopilot functions, etc., and then can enter the associated values (like frequencies or headings) just by typing on the
keyboard’s numberpad instead of fiddling with elusive mouse click spots. NpC4FSX&P3D is
programmed primarily for aircraft with avionics that were developed within standard FSX
programming guidelines but also supports third party add-
on aircraft such as the Flysimware L35A and MU2, PMDG 737NGX / B777, Flight1 King Air
B200, A2A Cherokee 180, and also works with GPS units like the GTN750. Setup manual included.
A registered (payware) copy of FSUIPC is required.
| Filename: | NumberPad_Control_for_FSX_and_P3D.zip |
| License: | Freeware |
| Added: | 19th February 2018, 21:21:16 |
| Downloads: | 481 |
| Author: | Al Klayton |
| Size: | 683.59 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FSX Boeing 737-800 Fixer ** Update ** |
|
File Description:
There are several issues with the DEFAULT Boeing 737-800 that Microsoft didn't ever fix. The first is the taxi light ground splash is mapped with the landing lights so you have to turn on the landing lights to see anything at night. Second, they defined 3 exits in the aircraft.cfg, but only enabled 2. Third, the switches that control the landing lights is reversed. You have to flip the switch to the OFF position to get the lights to come ON, same with the inoperable Retractable light swtiches. Lastly, the wingtip nav/strobes were poorly positioned. This package includes a reworked B737_800.mdl file that fixes the taxi light, B737_800.cab with the modified Overhead_Popup.XML to fix the gauges and a partial Aircraft.CFG that includes my modifications to the aircraft.CFG to fix the lights and exits. There is also a utility included that will self-install these items without any fuss. See the Readme.txt for more information.
| Filename: | FSX_Boeing_737800_Fixer__Update_.zip |
| License: | Freeware |
| Added: | 22nd August 2014, 09:58:20 |
| Downloads: | 1,777 |
| Author: | Aaron Parsons |
| Size: | 4.65 MB |
| Category: Flight Simulator X - Scenery | |
| YYWG Yarrawonga Airport Victoria Australia |
|
Images related to this file:
File Description:
Airport YYWG Yarrawonga is a regional airport in Victoria Australia. IMPORTANT NOTE This is the second version of this scenery. The main difference is it includes all the textures for the libraries of objects used. The missing textures in the first version (and the first version of Echuca) caused problems with other sceneries using the same libraries/objects. There is large number of hangers a training school and some private residentual lots with direct access to the taxiways. These files are for Flight Simulator X. Made using Airport Design Editor using some objects borrowed from Robert Budd's excellent Baccus Marsh. The standard airport bears only a passing resemblance to the real thing so this scenery is a big improvement and accurately reproduces real world. RECOMMENDED The scenery is designed to interface with ORBX FTX_AU scenery for Australia (payware). It will work without ORBX but will not interface as well with standard scenery.
| Filename: | YYWG_Yarrawonga_Airport_Victoria_Australia.zip |
| License: | Freeware |
| Added: | 9th April 2017, 07:35:17 |
| Downloads: | 261 |
| Author: | Colin Jeffery |
| Size: | 1.78 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Douglas C-47 (P2-002) PNG Defence Force |
|
Images related to this file:
File Description:
This folder contains a repaint for version 3.14 of the Douglas C-47 by Manfred Jahn and colleagues in the colors of C-47B-30-DK c/n# 32877 44-76545 of the PNGDF. It was built by Douglas and went to the RAAF in april 1945 as A65-84. It flew with 2 ATU with call sign VH-HJM and was later assigned to 34 squadron. After the war, it remained with the RAAF until 1975, when it was one of seven C-47's that were donated to the Papua New Guinea's Defence Force, where it was assigned the serial P2-002. It flew with the PNGDF until the late 1980's, when all C-47's were phased out. The aircraft was retained for display, and can currently been seen standing on pylons at Jackson Airport. Repaint by Jan Kees Blom for Manfred Jahn's C-47 version 3.14, based on the paintkit by Gman5250.
| Filename: | Douglas_C47_P2002_PNG_Defence_Force.zip |
| License: | Freeware |
| Added: | 16th August 2018, 16:27:48 |
| Downloads: | 208 |
| Author: | Jan Kees Blom |
| Size: | 8 MB |
| Category: Flight Simulator X - Original Aircraft | |
| Piaggio PD-808RM (Base Pack) |
|
File Description:
This is a complete simulation of the Piaggio PD-808. It includes advanced engine management, realistic systems, and some failure modeling. The model features a complete 3-D virtual cockpit,and a 2-D panel. Sounds are inculded. The external model features all typical animations plus a load of custom ones. Also incluides all custom special effects, including different selectable floodlights for the virtual cockpit (by simply flicking ON the proper light switch on the cockpit itself). Plus with a fly-on-the-numbers flight dynamics file. Includes full documentation. THIS IS THE FS-X RELEASE. IT WILL NOT WORK PROPERLY WITH FS-2004. THERE IS ALSO A FS-2004 RELEASE THAT WILL NOT WORK PROPERLY WITH FS-X. THis is the "RM" variant of the aircraft and base package. Other PD-808 variants will come next. This base package with the RM version will be needed for these to work properly.
| Filename: | Piaggio_PD808RM_Base_Pack.zip |
| License: | Freeware |
| Added: | 27th January 2009, 13:48:00 |
| Downloads: | 6,630 |
| Author: | Mario Noriega |
| Size: | 18.65 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |