Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Scenery | |
| SeaTac Area Airports |
|
Images related to this file:
File Description:
This scenery is a revision of the default Seattle-Tacoma (SeaTac), Boeing Field, Renton and Paine Field airports to work with MegaScenery Earth. The artificial plateau that Seatac is built on has been expanded and the new 3rd runway added. Runways, taxiways and various structures have been revised and/or relocated to match MegaScenery Earth ground textures. Default objects have been used in many cases to minimize FPS impact. MegaScenery Earth Washington-001 (KSEA, KBFI, KRNT) and -002 (KPAE) are required.
| Filename: | SeaTac_Area_Airports.zip |
| License: | Freeware |
| Added: | 11th December 2009, 09:51:46 |
| Downloads: | 5,562 |
| Author: | Al Wheeler |
| Size: | 2.48 MB |
| Category: Flight Simulator X - Flight Plans | |
| UK Island Hopping Phase (2) |
|
File Description:
UK Island Hopping (UKIH) is a series of flights exploring many of the islands off the coasts of the UK. Phase(1) started on the most northerly of the Shetland Islands, Unst, and finished in Kirkwall, the capital of the Orkney Islands, visiting many islands in between. This Phase(2)continues with the Western Islands of Scotland. Phase(3) will include the islands of England and Wales. Some payware and freeware scenery is required (see the Readme for details). By Gordon Wilkinson.
| Filename: | UK_Island_Hopping_Phase_2.zip |
| License: | Freeware |
| Added: | 11th March 2012, 00:40:34 |
| Downloads: | 1,063 |
| Author: | Gordon Wilkinson |
| Size: | 4.1 MB |
| Category: Flight Simulator X - Scenery | |
| EGNM Leeds Bradford Intl., West Yorkshire, UK |
|
Images related to this file:
File Description:
This update is for EGNM, Leeds Bradford Intl airport and made only for FSX: the terminal is completely remodeled, new control tower, taxiways and taxi signs updated to the latest charts, the PAPI for R14 now on the correct side of the runway, fire station added, fuel trucks and vehicle service paths included and many other scenery objects, 11 general aviation parking spots, airport views are from the roof of the control tower (when in tower view) please view the readme before installation.
| Filename: | EGNM_Leeds_Bradford_Intl_West_Yorkshire_UK.zip |
| License: | Freeware, limited distribution |
| Added: | 14th December 2013, 01:17:45 |
| Downloads: | 13,913 |
| Author: | Craig Scott |
| Size: | 644.92 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Orlando Intl. Airport |
|
File Description:
Orlando Intl. Airport for FSX. Several improvements were made, including: the addition of more default FSX jetways to now include all gates as at the real life airport; assigning all gates to specific airlines using Afcad2; the vehicle paths were rebuilt, which prevents airport vehicles from accessing the taxiways, which can result in traffic delays; and settings were edited so that as long as the scenery complexity slider in FSX is set at Normal or higher, all jetways will display at this airport.
| Filename: | Orlando_Intl_Airport.zip |
| License: | Freeware, limited distribution |
| Added: | 20th July 2007, 01:16:56 |
| Downloads: | 2,242 |
| Author: | Patrick Finch |
| Size: | 25.51 KB |
| Category: Flight Simulator X - Scenery | |
| TKB Object Library 2 |
|
File Description:
Introducing my second scenery objects library for the enjoyment of the Sim community. There are a variety of buildings which I am sure will be useful to you.
MY usual thanks to Peter Broom for checking out the models before publishing and of course the author’s for their books that I referenced to ensure I got my models reasonably accurate, British Military Airfield Architecture by Paul Francis and Graham Buchan Innes and his British Airfield Buildings Vols 1 & 2.
| Filename: | TKB_Object_Library_2.zip |
| License: | Freeware |
| Added: | 2nd October 2017, 18:59:40 |
| Downloads: | 279 |
| Author: | Terry Boissel |
| Size: | 6.14 MB |
| Category: Flight Simulator X - Scenery | |
| Project OTHH - Hamad International Airport (New Doha), Qatar |
|
Images related to this file:
File Description:
Hamad International Airport (New Doha). Ground surrounding is photoreal captured with FS Earth Tiles. It includes GMAX Main terminal, Concourses A, B, C, Tower, biggest hangars. All additional objects have been placed with Instant Scenery 2 from (Flight 1). Airport ground textures are made with SBuilderX & FS Earth Tiles. Dedicated AFCAD is set to "OTBD" ICAO to use actual AI Flightplans. Include official OTHH ATC frequencies, rwy lightning, runway settings, ILS, and approaches and many other surprises... Visit my web site www.christophebouville.com
| Filename: | Project_OTHH__Hamad_International_Airport_New_Doha.zip |
| License: | Freeware, limited distribution |
| Added: | 5th October 2013, 18:28:56 |
| Downloads: | 42,670 |
| Author: | Christophe Bouville |
| Size: | 54.41 MB |
| Category: Flight Simulator X - Scenery Design | |
| Terrain Design |
|
Images related to this file:
File Description:
Terrain Design for Flight Simulator X
This simple illustrated document explains the basic concepts in Flight Simulator X terrain, and how to change them using SBuilder for FS X. Make new water bodies, roads, vehicle traffic, airport flattens, remove autogen, add more detail - anybody can do it easily and quickly.
My most sincere apologies - I am unable, for lack of free time, to offer support of any kind. For questions or problems, please post in the Avsim scenery design forum.
| Filename: | Terrain_Design.zip |
| License: | Freeware |
| Added: | 14th December 2009, 13:29:15 |
| Downloads: | 18,386 |
| Author: | Luis Feliz-Tirado |
| Size: | 3.9 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Parker Airport (70NJ), NJ |
|
File Description:
Located 02 miles S of Asbury, New Jersey on 13 acres of land, Parker Airport is a private turf strip located on residential property. This airport is challenging in many ways. For one, when approaching from the southeast the airport is located immediately after a tall ridge, so when topping this ridge at altitude you may not even see the airport over the nose of your aircraft before you overfly it. The runway for this airport is 1600' feet long but it is curved and slightly sloped perpendicular to your roll, so significant rudder will be needed to stay aligned - be careful when operating with any crosswind component! It is highly recommended that you only depart via Runway 25 and arrive via Runway 07 to avoid having to clear significant obstacles prior to landing or after taking off. This airport has no hard-surfaced runway and there is a very noticeable "bump" in the terrain halfway down the runway that will literally bounce your aircraft into the air - I tried my best to smooth it over but could not get rid of it entirely. When taking off make sure you have back pressure applied so your main gear only bounce you high enough to remain within ground effect - hitting your nose wheel can cause an extreme pitch up leading to a stall. Trees close in tight to the runway at the end of Runway 07 or the start of Runway 25, however collision has been disabled with the trees nearest the runway so you can scrape some branches if needed on the takeoff/landing rolls. The author has successfully departed and arrived on both runways in the default Cessna 172 under moderate crosswind from the northeast. This field may definitely require some practice but it is usable!! This airport has no edge lighting, so daytime VFR operations only are recommended.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Parker_Airport_70NJ_NJ.zip |
| License: | Freeware |
| Added: | 10th February 2011, 05:04:30 |
| Downloads: | 215 |
| Author: | Drew Sikora |
| Size: | 559.02 KB |
| Category: Flight Simulator X - Scenery | |
| POLISH AIRPORTS VOL.1 X v4 DEMO |
|
Images related to this file:
File Description:
POLISH AIRPORTS VOL.1 X v4 DEMO is the 4th version of detailed sceneries of EPGD Gdansk, EPKT Katowice, EPRZ Rzeszow (+EPRJ) and EPLB Lublin (+EPSW) airports in Poland, fully compatible with FSX/FSX:SE/P3Dv1/P3Dv2/P3Dv3/P3Dv4 and FSW by Dovetail.
Gdansk Lech Walesa Airport (GDN/EPGD) is an INT airport, the 3rd largest airport in Poland, often used as a diversionary airport for Warsaw Frederic Chopin Airport in the event of poor weather or emergencies.
Katowice International Airport (KTW/EPKT) is an INT airport, which service both passenger flow and cargo flights. Its concrete runway is 3,200 m and can accommodate even heavy transports such as An-124 or An-225.
Rzeszow-Jasionka Airport (RZE/EPRZ) is an INT airport located in southeastern Poland. Near to EPRZ there is located a smaller Rzeszow Jasionka Airport (EPRJ) used by Rzeszow Aeroclub (900x30m lightened asphalt runway, 700x100m grass strip).
Lublin Airport (Port Lotniczy Lublin) (LUZ/EPLB) has a 2520m runway, and the terminal facilities are capable of handling 4 x B738/A320.
This Demo version of the commercial product features same airport layout as in the full version but with limited 3D objects and low resolution textures. Using this free demo ensures no problems with online (VATSIM, IVAO, multiplayer etc.) flying in case some users use the payware scenery and some don't.
The product is equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all versions of included airports you may have installed before, prior to installing this product. Please also make also sure that no duplicated AFCAD files are installed.
Enjoy your virtual flying with Drzewiecki Design!
| Filename: | POLISH_AIRPORTS_VOL1_X_v4_DEMO.zip |
| License: | Freeware, limited distribution |
| Added: | 23rd August 2017, 01:41:12 |
| Downloads: | 5,103 |
| Author: | Drzewiecki Design |
| Size: | 36.58 MB |
| Category: Flight Simulator X - Scenery | |
| FSX-LIEO-Olbia-Sardinien |
|
File Description:
Now, after a long construction period and many hours of free time,
the new FSX airport LIEO-Olbia-Sardinia is finally finished, of
course as always with lots of details and a few extras.........
So off we go, off to Sardinia to the Costa Smeralda, preferably
with an A 321 or a Boeing 737, where you switch to a helicopter or
a smaller aircraft and explore the landscape in detail, including
the port, which has a heli pad for them VIP guests or you can take
a fire-fighting plane and help put out the fire. Of course, in the
direction of the hot air balloons, please first fill up with water
in the sea.............
Installation:
Unpack the zip folder: then copy the FSX-LIEO-Olbia folder into
the FSX addon folder, start the FSX, go to settings, scenery
library, add area, press OK, then you can start.
Extras:
! If you already have one of these files activated in your scenery
library, you do not need to install it again.
For all extras, the respective file must be copied individually
into the Addon Scenery folder and activated individually in FSX as
described during installation.
File: 3DPeople_Lib............ (to see people)
File: ObjLib-Large-Car-Parking-FSX.............(parking spaces and
vehicles)
File: PKP...........(to see trains and wagons)
File: Cobus.........(to see buses)
File: FSX_LTS......(lights and light poles)
File: EZ object Library.......(! Most important file for numerous
accessories + buildings)
! Note whoever installed the old EZ Object Library from me before
October 25th, 2023 should install this new one here and delete the
old one in FSX because I have completely revised it!
Candy:
As a treat, I'll give you the Canadair CL215 firefighting plane
that is stationed in Olbia 1x as AI traffic + 1x for flying
yourself..............
You can find more information on my YouTube channel
https://www.youtube.com/channel/UC7vHXQMa3hhU2iGtODXlkHw/videos
| Filename: | FSXLIEOOlbiaSardinien.zip |
| License: | Freeware |
| Added: | 29th October 2023, 12:01:15 |
| Downloads: | 608 |
| Author: | Ewald Wagner alias Jamaika |
| Size: | 251 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |