Category: Miscellaneous Files - Demos from Commercial Vendors
Eurofighter: Germany Bundeswehr - Laage

File Description:
Germany Bundeswehr Eurofighter, station in Rostock - Laage, for FS2004 , 5 single seater (30+06, 30+08, 30+09, 30+11,98+39) 5 two seater (30+10, 30+03,98+03, 98+31, 98+33) and new flight dynamics (update: trim, gear and aileron) Eurofighter is a single-seat, twin-engine, agile combat aircraft which will be used in the air-to-air, air-to-ground and tactical reconnaissance roles. The design of Eurofighter Typhoon is optimised for air dominance performance with high instantaneous and sustained turn rates, and specific excess power. Special emphasis has been placed on low wing loading, high thrust to weight ratio, excellent all round vision and carefree handling. The use of Stealth technology is incorporated throughout the aircraft’s basic design. The new AFS - Eurofighter has flightdynamics of real Eurofighter. This has a new panel with new gauges and a new high textures virtual cockpit. (INFO: Panel is FREEWARE, virtual cockpit and external model is free trialware !!) Model, panel, sounds, textures and gauges by www.afs-design.de - Author: A.Meyer.

Filename:	Eurofighter_Germany_Bundeswehr__Laage.zip
License:	Commercial demo
Added:	10th December 2005, 18:28:59
Downloads:	1,305
Author:	Andreas Meyer
Size:	13.64 MB

Category: Flight Simulator X - Original Aircraft
Cessna Citation Sovereign

File Description:
This VJPL production of the Cessna Citation Sovereign comes fully loaded with all the features one could expect of a 16 million dollar business jet Custom designed to be frame rate friendly using a "Lite" switch that during use in high density scenery hides the passenger cabin in an instant and reduces the load on the computer, further this model performs better in the VC than with the 2D panel in view, interior appointments include a high detail passenger cabin with running water in the lavatory and a flushing toilet, all tables extend for use and include wine for the animated passenger, a functional bar, an operational computer and all cabin doors including closet open and close and leather seating, animated copilot, fully click able Virtual Cockpit animated down to the visors, and custom cabin lighting, the exterior has all control surfaces and exits animated and thrust reverser's. PDF documents for this model include performance data, flight instructions and FMC operations manual, My thanks to Glenn Copeland for the computer display, the good Friar and all those who helped with specifications and layout.

Filename:	Cessna_Citation_Sovereign.zip
License:	Freeware
Added:	11th May 2007, 14:39:41
Downloads:	27,063
Author:	Chuck Jodry VJPL WestcoastATC.com
Size:	9.8 MB

Category: Flight Simulator X - Scenery
Mesh South America / MeSA E03

File Description:
FSX Mesh South America Project: This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers). Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1. Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5-10 NM from the point of view) is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD). THIS FILE: FSX_MeSA_E03 (Column E x Row 03) covers the area inside the boundaries: N = 5º 37,5' N; S = 0º 0' S; W = 60º 0' W; E = 52º 30' W;

Filename:	Mesh_South_America__MeSA_E03.zip
License:	Freeware
Added:	13th June 2007, 21:41:26
Downloads:	1,255
Author:	Hely Heck Jr. and José Lôbo
Size:	83.82 MB

Category: Flight Simulator X - Scenery
FSX_MeSA_G08

File Description:
FSX Mesh South America Project: This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers). Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1. Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5-10 NM from the point of view) is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD). THIS FILE: FSX_MeSA_G08 (Column G x Row 08) covers the area inside the boundaries: N = 22º 30' S; S = 28º 7.5' S; W = 45º 0' W; E = 37º 30' W; AUTHORS: Hely Heck Junior - Magrao ( [email protected] ) and Jose Lobo ( [email protected] )

Filename:	FSX_MeSA_G08.zip
License:	Freeware
Added:	15th June 2007, 15:04:47
Downloads:	1,133
Author:	Hely Heck Jr. and José Lôbo
Size:	12 MB

Category: Flight Simulator X - Scenery
FSX_MeSA_H04

File Description:
FSX Mesh South America Project: This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers). Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1. Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5-10 NM from the point of view) is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD). THIS FILE: FSX_MeSA_H04 (Column H x Row 04) covers the area inside the boundaries: N = 0º 0' S; S = 5º 37.5' S; W = 37º 30' W; E = 30º 0' W; AUTHORS: Hely Heck Junior - Magrao ( [email protected] ) and Jose Lobo ( [email protected] )

Filename:	FSX_MeSA_H04.zip
License:	Freeware
Added:	15th June 2007, 15:07:51
Downloads:	944
Author:	Hely Heck Jr. and José Lôbo
Size:	3.56 MB

Category: Flight Simulator X - Scenery
FSX_MeSA_H05

File Description:
FSX Mesh South America Project: This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers). Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1. Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5-10 NM from the point of view) is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD). THIS FILE: FSX_MeSA_H05 (Column H x Row 05) covers the area inside the boundaries: N = 5º 37.5' S; S = 11º 15' S; W = 37º 30' W; E = 30º 0' W; AUTHORS: Hely Heck Junior - Magrao ( [email protected] ) and Jose Lobo ( [email protected] )

Filename:	FSX_MeSA_H05.zip
License:	Freeware
Added:	15th June 2007, 15:08:10
Downloads:	943
Author:	Hely Heck Jr. and José Lôbo
Size:	22.93 MB

Category: Flight Simulator X - Scenery
FSX_MeSA_H06

File Description:
FSX Mesh South America Project: This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers). Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1. Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5-10 NM from the point of view) is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD). THIS FILE: FSX_MeSA_H06 (Column H x Row 06) covers the area inside the boundaries: N = 11º 15' S; S = 16º 52.5' S; W = 37º 30' W; E = 30º 0' W; AUTHORS: Hely Heck Junior - Magrao ( [email protected] ) and Jose Lobo ( [email protected] )

Filename:	FSX_MeSA_H06.zip
License:	Freeware
Added:	15th June 2007, 15:19:51
Downloads:	997
Author:	Hely Heck Jr. and José Lôbo
Size:	1.61 MB

Category: Flight Simulator 2004 - AI Aircraft
Microlights- Vol.2

File Description:
Three more low-polygon count models for AI use in F2004, all tail-draggers, one based on the AirBike, with two seats, the second based on the Weedhopper, the third based on the Affordaplane. I've only included one or two texture sets for each aircraft, but I have included basic repaint templates for the Airbike and the Weedhopper, so you can generate a multitude of brightly-coloured aircraft to your own taste in a few minutes. Each model includes three LOD models and a reduced-detail shadow model, for improved visual performance, and to this end I have also included updated models for my previous "Microlights for AI" upload (required for the textures if you want these aircraft). Although the model file size will be bigger, because FS only loads the LOD model it requires for the given range of the aircraft, once the aircraft is more than a few hundred feet away from the viewpoint, it will affect the frame-rate less than the originals. Please see the enclosed text file for further details.

Filename:	Microlights_Vol2.zip
License:	Freeware, limited distribution
Added:	24th June 2007, 21:49:45
Downloads:	522
Author:	Chris Eve
Size:	607.56 KB

Category: Fly! II - Aircraft
De Havilland Canada DHC2 Beaver (on floats with retracts)

File Description:
IBM PC VERSION ONLY. This file contains DLL's that are not Mac. compatible. A total of over 1500 aircraft were built. With double slotted full span flaps (drooping ailerons) and 1000lbs payload, its STOL capability, along with having a float version with retracts, made it an ideal "Bushplane" with unparalelled performance from any contempory aircraft. Many Beavers are still in use today. The model was built using Truespace 4.3 and Chris Wallace's 3ds to S3d converter. Photorealistic interior views are used with auto switching day-time/night-time main panel. The model requires that you have the Tri default aircraft installed. A few non-standard features have been included to improve the ease of operation. 1. nose wheel steering (the original uses differential braking and castoring nose gears) 2. an electric pump for hydraulics (optional on the original ) 3. a simple GPS that can be slaved to the auto pilot. (unheard of during the production life of the original but very likely to be found on any survivng present day aircraft. 4. a transponder has been added to enable IFR flights

Filename:	De_Havilland_Canada_DHC2_Beaver__on_floats_with_re.zip
License:	Freeware, limited distribution
Added:	31st August 2008, 07:45:53
Downloads:	314
Author:	Paul Simpson, Laurent Claudet, Randall Rocke, Roger Mazengarb
Size:	4.85 MB

Category: Flight Simulator 2004 - Miscellaneous Files
Project Opensky Boeing 777 Series FDE Service Pack D

File Description:
This package may NOT BE ALTERED, MERGED, REEDITED, REDISTRIBUTED OR UPLOADED AS PART OF ANY PAYWARE OR FREEWARE PACKAGE. LEGAL IMPLICATIONS EXIST! This revised 777 package inclues: - Correct 777 performance and feel based on airline FAA Level D simulators and documentation. - Use of MSFS payload and fuel editor. - Use of MSFS flight planner and Navigation Log for flight/fuel planning. - Use of true 777 landing gear footprint as default gear points. Standard 3-wheel points have been included as an additional option [courtesy of Philip Foglar, POSKY] in this update along with more new variants of 777-200ER [PW4098, GE90-90B]. Engine start-up time has been modified again for more realistic timing [YouTube Video was used as a reference]. Also included are the FDEs for the recently released 777-300 series. AES Compatability files included. The FDEs included for this series are copyrighted by Project Opensky, Brandon D. Henry, and Warren C. Daniel. They may not be merged, altered and/or used for other uploads to any other aircraft [or website] without Authors' permission.

Filename:	Project_Opensky_Boeing_777_Series_FDE_Service_Pack.zip
License:	Freeware, limited distribution
Added:	30th December 2008, 18:06:51
Downloads:	4,007
Author:	Brandon D. Henry
Size:	246.66 KB