Category: Flight Simulator 2004 - Gauges
DC-3 Single IFR Panel Comms Pack Update 2.3

File Description:
This package may appeal to those who fly the DC-3 or other aircraft in multiplayer using Mark "Dark Moment" Beaumont's IFR panel. The modification was initially designed for the very active virtual airline 'DC-3 Airways' (www.dc3airways.com). It updates this panel to be able to change either preset 'Teamspeak' or 'Roger Wilco' frequencies from within the cockpit with no task switch, depending on which Comms software is in use at the time. That said, the new 'Roger Wilco' switch gauge included can be added to any panel, allowing switching of preconfigured 'Roger Wilco' frequencies with no requirement for additional software other than 'Roger Wilco' itself. Offered with choice of white or orange Bendix-style readout. To use the 'Teamspeak' gauge, which appears as a light on the COM2 panel and can be switched using dialed frequencies, 'Teamspeak' Client and 'FSTSTuner' software are required. Full details are in the README.

Filename:	DC3_Single_IFR_Panel_Comms_Pack_Update_23.zip
License:	Freeware
Added:	2nd April 2004, 00:03:26
Downloads:	801
Author:	Mark Beaumont, Matt Kaprocki
Size:	143.64 KB

Category: Flight Simulator 2004 - Gauges
Custom Ki-525 HSI

File Description:
Photoreal custom designed gauge of a Bendix-King KI-525 HSI gauge.Specially designed to be adapted on Dreamfleet A-36 Bonanza panel.

Filename:	Custom_Ki525_HSI.zip
License:	Freeware, limited distribution
Added:	20th March 2005, 23:37:14
Downloads:	2,969
Author:	Daniel Maqour
Size:	482.21 KB

Category: Flight Simulator 2004 - Gauges
Airspeed Reduction Monitor (ARM) UPDATE!

File Description:
FS2004 Gauge: Airspeed Reduction Monitor(ARM). This is an UPDATE to the ARM_1.zip file.

It corrects the reverse thrust problem with the ARM_1.cab file.The original ARM_1.cab file contained an error that only reversed one engine. This update solves that problem. The new CAB file will replace the first version. See info.txt for copy/paste instruction. By Glenn Copeland

Filename:	Airspeed_Reduction_Monitor_ARM_UPDATE.zip
License:	Freeware
Added:	16th March 2006, 00:01:22
Downloads:	2,863
Author:	Glenn Copeland
Size:	13.51 KB

Category: Flight Simulator 2004 - Gauges
FS2004 GPS Map View Gauge v3.0

File Description:
The ultimate gauge. The Map will show: Airports details (Runways ID's, length & ILS), VOR's and NDB's frequencies, Intersections and waypoints, Airspaces, Approaches and flight routes. You can toggle the view you require for your flight. Also you can zoom in/out to see the nearest airports, vor's and ndb's. The map will indicate A/C heading flightplan title and waypoints ID's. Version 3 includes more enhancements such as the ability to input the ICAO code or name of any airport and the map will show all the frequencies of that airport including ATIS, ILS, AND COM. In addition, the map will show the active runway designations, length and width. You can also input ICAO code of any VOR/NDB and the map will show their frequencies. There was a bug in v2.0, in which if you enter ( click on ENT )the ICAO code of an airport, you will lose the flight plan loaded. Now you can go back to the flight plan and with the NEXT/PREV buttons you have the choice of where to start your FP. The gauge will show Flight Plan Title, originating and destination airports, active waypoint, waypoint index and FP crusing altitude. I addition, the gauge will show various useful information, such as, Runway IDs, lenght, width and approach magnetic heading, Airport name, city, and type. NAV1/2 names, codes, distances and ETA's, ADF1/2 names and codes. Finally, the gaugee will show other information, such as, magvar, indicated airspeed, mach, ground velocity, ambient wind velocity and direction, bank angle , and a/c altitude ( radio height ). All the information above and much more on a single gauge window.

Filename:	FS2004_GPS_Map_View_Gauge_v30.zip
License:	Freeware, limited distribution
Added:	14th September 2005, 14:19:46
Downloads:	10,837
Author:	Talal Alhaj
Size:	710.05 KB

Category: Flight Simulator 2004 - Gauges
Parachute Jumper Control Gauge

File Description:
This FS2002/4 gauge automates the Parachute Jumper effect (made by Gianni Vakirtzi), and can be used for aircraft that use the Tailhook command to open aircraft doors, like Mike Stone's latest C-130. See included README for details.

Filename:	Parachute_Jumper_Control_Gauge.zip
License:	Freeware, limited distribution
Added:	24th September 2003, 21:34:17
Downloads:	3,926
Author:	Rob Barendregt
Size:	2.66 KB

Category: Flight Simulator 2004 - Gauges
AutoEnvironment v.1

File Description:

Airliner environment upgrade: Autoland and Engine Exhaust System/APU (improved), Vertical Navigation, Wingtip Vortices, Auto Cabin announcements, Co-pilot touchdown assistance, Engine abuse warning, 3D cruise level condensation trails, Cold-and-dark procedure. Full installation instructions for most common freeware passenger airliners - listings included. By Martyn Becker.
File size - 21MB

Filename:	AutoEnvironment_v1.zip
License:	Freeware
Added:	7th February 2009, 19:28:15
Downloads:	8,595
Author:	Martyn Becker
Size:	19.95 MB

Category: Flight Simulator 2004 - Gauges
WindGauge

File Description:
These gauge was written after a VFR ferryflight from Key West (Florida) to St. Johann (Austria). Often I missed wind-informations for higher or lower altitudes. Sometimes I have noticed, that if I will fly at an other altitude I will have tail wind instead of head wind. But this informations i could only got flying to this altitude and test it. You will get following informations: - Feet - Speed (in Knots) - Dir (Wind direction) - Gust (max gust speed - Turb ( Turbulence 0-4) - Shear (0-3) - Var (direction variability) - Temp (temp in Celsuis and Fahrenheit) - Var (temp variation Day/Night) - DewPoint (dewpoint in Celsuis and Fahrenheit)

Filename:	WindGauge.zip
License:	Freeware
Added:	8th November 2004, 03:23:36
Downloads:	3,043
Author:	Widmann Andreas
Size:	41.38 KB

Category: Flight Simulator 2004 - Gauges
TWiDgau

File Description:
FS2004 TWiD gauge (Track,Wind,Drift) versions 1 (corporate) and 2 (commercial/military). Both have five analog displays that show heading, course, track, drift, wind direction, and wind speed information. By keeping the Track cursor aligned with the Course cursor while flying, the course-diviating effect of wind drift will be eliminated. Also helpful for hovering/landing helicopters because of the 360-degree track presentation. By Glenn Copeland

Filename:	TWiDgau.zip
License:	Freeware
Added:	20th October 2005, 11:23:50
Downloads:	1,886
Author:	Glenn Copeland
Size:	344.26 KB

Category: Flight Simulator 2004 - Gauges
FS2K+ and CFS+ Gauge Creation Tutorial Rev.18

File Description:
Not for non-programmers but can be used by non-C programmers. Keyboard input section added. Creating static and dynamic tooltips sections added. Many other minor updates. Outdated FS98 and FS2000 info removed. FOR PROGRAMMING C-LANGUAGE GAUGES ONLY. Dai Griffiths, Dragonflight Design. (First update for two years!).

Filename:	FS2K_and_CFS_Gauge_Creation_Tutorial_Rev18.zip
License:	Freeware
Added:	18th June 2006, 01:13:49
Downloads:	1,134
Author:	Dai Griffiths
Size:	2.98 MB

Category: Flight Simulator 2004 - Gauges
TerraVue: Moving Map, Ground Proximity, Information pages

File Description:
FS2004 Gauge: TerraVue. This gauge contains a moving map display with a terrain elevation legend color-keyed to the FS9 map. The legend allows the elevation of terrain lying ahead of the aircraft to be taken into account. TerraVue can display the FS map in seven ranges from 4 NM to 160 NM. The Map mode also employs animation to show the proximity between the aircraft and ground in a graphical and digital display with indicators showing whether the distance is increasing or decreasing. The gauge can be switched to the Information mode which will display up to four individual pages of data that is created by you. These scrollable pages may contain checklists, airport diagrams, approach plates, strip charts, etc. Fully functional, free software to help quickly construct these pages is included along with an illustrated tutorial that demonstrates the simple copy/paste process that tailors these pages to include whatever data you wish. For panel or separate window installation with TerraVue Icon gauge. By Glenn Copeland

Filename:	TerraVue_Moving_Map_Ground_Proximity_Information_p.zip
License:	Freeware
Added:	24th June 2006, 15:13:12
Downloads:	5,073
Author:	Glenn Copeland
Size:	1.92 MB