Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Miscellaneous Files - Demos from Commercial Vendors | |
| MCR - 01 Ultralight, France new |
|
File Description:
The MCR Ultralight is a side by side two-seater airplane with incredible performance and capability. Fast and agile, the VLA was specially designed to reach top speed while providing the most enjoyable experience to pilots
The MCR Sportster is a very high performance aircraft, that can cruise as fast as 300 km/h with only a 100 hp engine, at very low cost.
Thanks to the highest level of technology available, and very light material, the Sportster has a very efficient direct control system that guarantees the same satisfaction as flying a fighter jet.
The MCR Sportster can be equipped with a choice of different power plants, but may also be fitted with other options such as :
Ballistic Recovery System parachute
Extended range wing tanks.
Toe operated Hydraulic brakes
The MCR Sportster is available in kit form in respect with the CNSK regulation (specific kit airworthiness certificate) or in the "experimental" category depending on the registration country.
( Previewversion )
Panel, GAUGES, model, sound and textures by www.afs-design.de - Author: A.Meyer.
| Filename: | MCR__01_Ultralight_France_new.zip |
| License: | Commercial demo |
| Added: | 9th March 2008, 01:35:01 |
| Downloads: | 1,405 |
| Author: | Andreas Meyer |
| Size: | 13.41 MB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Germany, MCR - 01 Ultralight |
|
File Description:
The MCR Ultralight is a side by side two-seater airplane with incredible performance and capability. Fast and agile, the VLA was specially designed to reach top speed while providing the most enjoyable experience to pilots
The MCR Sportster is a very high performance aircraft, that can cruise as fast as 300 km/h with only a 100 hp engine, at very low cost.
Thanks to the highest level of technology available, and very light material, the Sportster has a very efficient direct control system that guarantees the same satisfaction as flying a fighter jet.
The MCR Sportster can be equipped with a choice of different power plants, but may also be fitted with other options such as :
Ballistic Recovery System parachute
Extended range wing tanks.
Toe operated Hydraulic brakes
The MCR Sportster is available in kit form in respect with the CNSK regulation (specific kit airworthiness certificate) or in the "experimental" category depending on the registration country.
( Previewversion )
Panel, GAUGES, model, sound and textures by www.afs-design.de - Author: A.Meyer.
| Filename: | Germany_MCR__01_Ultralight.zip |
| License: | Commercial demo |
| Added: | 11th December 2008, 08:28:21 |
| Downloads: | 2,937 |
| Author: | Andreas Meyer |
| Size: | 13.41 MB |
| Category: Flight Simulator X - Scenery | |
| FSX_MeSA_H06 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_H06 (Column H x Row 06)
covers the area inside the boundaries:
N = 11º 15' S; S = 16º 52.5' S;
W = 37º 30' W; E = 30º 0' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
| Filename: | FSX_MeSA_H06.zip |
| License: | Freeware |
| Added: | 15th June 2007, 15:19:51 |
| Downloads: | 998 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 1.61 MB |
| Category: Flight Simulator X - Scenery | |
| FSX_MeSA_H05 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_H05 (Column H x Row 05)
covers the area inside the boundaries:
N = 5º 37.5' S; S = 11º 15' S;
W = 37º 30' W; E = 30º 0' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
| Filename: | FSX_MeSA_H05.zip |
| License: | Freeware |
| Added: | 15th June 2007, 15:08:10 |
| Downloads: | 945 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 22.93 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA E03 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_E03 (Column E x Row 03)
covers the area inside the boundaries:
N = 5º 37,5' N; S = 0º 0' S;
W = 60º 0' W; E = 52º 30' W;
| Filename: | Mesh_South_America__MeSA_E03.zip |
| License: | Freeware |
| Added: | 13th June 2007, 21:41:26 |
| Downloads: | 1,256 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 83.82 MB |
| Category: Flight Simulator X - Scenery | |
| FSX_MeSA_H04 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_H04 (Column H x Row 04)
covers the area inside the boundaries:
N = 0º 0' S; S = 5º 37.5' S;
W = 37º 30' W; E = 30º 0' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
| Filename: | FSX_MeSA_H04.zip |
| License: | Freeware |
| Added: | 15th June 2007, 15:07:51 |
| Downloads: | 946 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 3.56 MB |
| Category: Flight Simulator 2004 - Sounds | |
| Rolls Royce RB211-535 Soundset for the Boeing 757 and Tupolev Tu204 |
|
File Description:
The 757 has long been on my list of to do's to update. I finally got around to the daunting task of finding all new clips, redoing the whole cfg, and finding a whole new perspective of the 757. With ultra-Realism in mind, Ive created my best work
yet for the narrow body aircraft. You can clearly hear that this set deserves the title of being a Rolls Royce. All files were recorded in full stereo and all exterior files were recorded in very close proximity to give you the most realistic simulation experience possible. The signature of this engine is the mid-spool compression grind. When the thrust of this engine hits 85% you'll gear a nose-grating grind noise that lasts for the rest of the time the engine is at that level or higher. Same for the inside, just to a lesser excent. Recomended for use with the Project Opensky Boeing 757, IFDG v2/v3 Boeing 757 and any other model of the Tupolev Tu204/Tu214 that you can find, as these engines also power that aircraft. Please Enjoy
| Filename: | Rolls_Royce_RB211535_Soundset_for_the_Boeing_757_a.zip |
| License: | Freeware |
| Added: | 22nd October 2005, 01:44:35 |
| Downloads: | 7,737 |
| Author: | Devyn Silverstein |
| Size: | 13.63 MB |
| Category: Flight Simulator X - Scenery | |
| FSX_MeSA_G08 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_G08 (Column G x Row 08)
covers the area inside the boundaries:
N = 22º 30' S; S = 28º 7.5' S;
W = 45º 0' W; E = 37º 30' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
| Filename: | FSX_MeSA_G08.zip |
| License: | Freeware |
| Added: | 15th June 2007, 15:04:47 |
| Downloads: | 1,138 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 12 MB |
| Category: Flight Simulator X - Scenery Design | |
| "Gerald R. Ford Intl "KGRR" FSX" |
|
Images related to this file:
File Description:
Microsoft Flight Simulator X Welcome to A "Fully Modeled" Gerald R. Ford International Airport (KGRR) for FSX.
All 3D Buildings including Runways, Taxiways and Photoreal, Even to the the smallest detail is custom hand made, through blender modeling tool.AI Traffic including Airport vehicles Work Perfectly. All Scenery is original work, This was a 3 year Long project, and was finally finished on 2021 of June. Main Features to this scenery is Custom 3D Building, Custom Seasonal Photoreal, Custom Fully modeled Airport, Custom Parked Static Vehicles throughout the airport, Custom Fences, Custom Runway and Taxiways, Working Ai Traffic, Custom small Detail and so much more...
Note to have it fully functional, GSX level 2 is Required to Power the Jetways, there's also a option to have static jetways, if you don't have GSX.
Please Don't Modify, Change, or Re-upload, Reuse 3d objects or Textures. The airport is intended to be Freeware. This is a Cheer-Up Gift to all Simulation Aviation community Pilots. Please enjoy! Fly lots "Keep-Climbing "Please Share the news of this Airport being released Thankyou.
| Filename: | Gerald_R_Ford_Intl_KGRR_FSX.zip |
| License: | Freeware, limited distribution |
| Added: | 7th July 2021, 15:35:39 |
| Downloads: | 980 |
| Author: | Dillon Rocque |
| Size: | 393.6 MB |
| Category: Flight Simulator X - Scenery | |
| FSX Portland International Airport KPDX |
|
Images related to this file:
File Description:
Welcome to Portland International Airport for FSX!
The City of Roses is in the process of revamping KPDX. Many of us have spent time on Concourse A
waiting for our Horizon flight. Many have utilized the ground level walkways on Concourse E to
get to their United Express flight. Both are things of the past.
KPDX is now a primary Alaska Airlines hub. This summer British Airways will start service to London
Heathrow.
The runways have been adjusted to their current length. The taxiways have been corrected (this is
particularly important at the juncture of 10L and 21 which used to overlap). A copy of the current
airport diagram is included.
All the buildings (with the exception of the tower) are custom. Airport vehicles use
the proper vehicle paths and do not use taxiways.To achieve this I had to add a vehicle path that crosses
10R and another that crosses 03.
Three scenery complexity levels are used (normal,dense, and very dense). More eye candy appears with each
increase.
| Filename: | FSX_Portland_International_Airport__KPDX.zip |
| License: | Freeware, limited distribution |
| Added: | 15th January 2020, 05:01:47 |
| Downloads: | 1,797 |
| Author: | Brett Delana |
| Size: | 12.18 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |