Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Scenery | |
| Cushman Air Park (WACP) |
|
File Description:
This is a new “fictitious" Air Park in the State of Washington designed specifically for FSX. It serves as the Fire Base Air operations in the Pacific North West. Designed for use with Ultimate Terrain X (UTX-USA), Mesh Resolution set to 10m, and Mesh Complexity set to 80.
Some older (FS9) object libraries have been used but are not required(see the readme). Includes AI and a special Fire Spotter repaint of the default Cessna 208B.
| Filename: | Cushman_Air_Park_WACP.zip |
| License: | Freeware, limited distribution |
| Added: | 14th September 2007, 18:24:31 |
| Downloads: | 1,200 |
| Author: | Bill Dick and Phil Cayton |
| Size: | 527.58 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Redwing Airport (2N6), NJ |
|
File Description:
Located 01 miles S of Jobstown, New Jersey on 53 acres of land, Redwing Airport is a small dual turf strip that hosts both single engine craft and gliders. No services are provided to transient aircraft, you can park over near the hangars (no visible tie downs). The Runway 11/29 edge lights are adjustable low-high in real life but for the sim I've set them at medium. Trees are summer ONLY.
Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Redwing_Airport_2N6_NJ.zip |
| License: | Freeware |
| Added: | 15th October 2010, 15:34:10 |
| Downloads: | 329 |
| Author: | Drew Sikora |
| Size: | 527.92 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Weidel Private Airport (2NJ3) NJ |
|
File Description:
Located 03 miles W of Pennington, New Jersey, Weidel/Private/ Airport is a private turf strip. No transient services are offered. Trees are summertime ONLY. A fence completely borders the runway and there are 30ft trees on one approach and 30ft power lines immediately before the runway threshold on the other end, offering some casually challenging approaches. You can pull off the runway to park near the barn if you must rest briefly before heading out again.
Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Weidel_Private_Airport_2NJ3_NJ.zip |
| License: | Freeware |
| Added: | 29th October 2010, 03:37:26 |
| Downloads: | 204 |
| Author: | Drew Sikora |
| Size: | 421.43 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Inductotherm Airport (3NJ6), NJ |
|
File Description:
Located 01 miles E of Rancocas, New Jersey, Inductotherm Airport is a private airstrip. No storage is offered for transient aircraft, although there is ample room on the tarmac if you wish to park there. You can also start from a parking spot - wingspans greater than 50 feet must start on the runway. 100LL fuel available by stopping near the fuel tank, Jet-A fuel available by landing near the fuel truck. Trees are summertime ONLY.
Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Inductotherm_Airport_3NJ6_NJ.zip |
| License: | Freeware |
| Added: | 25th November 2010, 14:18:37 |
| Downloads: | 187 |
| Author: | Drew Sikora |
| Size: | 1.16 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA B13 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_B13 (Column B x Row 13)
covers the area inside the boundaries:
N = 50º 37,5' S; S = 56º 15' S;
W = 82º 30' W; E = 75º 0' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
TerraBrasilis: www.terra-brasilis.org
| Filename: | Mesh_South_America__MeSA_B13.zip |
| License: | Freeware |
| Added: | 11th June 2007, 22:12:07 |
| Downloads: | 1,160 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 1.82 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA C08 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_C08 (Column C x Row 08)
covers the area inside the boundaries:
N = 22º 30' S; S = 28º 7,5' S;
W = 75º 0' W; E = 67º 30' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
TerraBrasilis: www.terra-brasilis.org
| Filename: | Mesh_South_America__MeSA_C08.zip |
| License: | Freeware |
| Added: | 12th June 2007, 14:20:06 |
| Downloads: | 1,236 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 30.37 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA C09 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_C09 (Column C x Row 09)
covers the area inside the boundaries:
N = 33º 45' S; S = 39º 22,5' S;
W = 75º 0' W; E = 67º 30' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
TerraBrasilis: www.terra-brasilis.org
| Filename: | Mesh_South_America__MeSA_C09.zip |
| License: | Freeware |
| Added: | 12th June 2007, 16:29:54 |
| Downloads: | 1,276 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 41.01 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA D08 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent
of South America and some islands, divided in tiles identified in a map by its
column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed
with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal
resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM
files in threads and only the closer terrain (about 5-10 NM from the point of view)
is rendered in high detail, while at far distances FSX shows up its default low
resolution mesh, when there is not a third part terrain mesh compiled in all
others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_D08 (Column D x Row 08)
covers the area inside the boundaries:
N = 22º 30' S; S = 28º 7.5' S;
W = 67º 30' W; E = 60º 0' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
TerraBrasilis: www.terra-brasilis.org
| Filename: | Mesh_South_America__MeSA_D08.zip |
| License: | Freeware |
| Added: | 13th June 2007, 12:36:30 |
| Downloads: | 1,168 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 58.82 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA B09 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5-10 NM from the point of view) is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD).
THIS FILE:
FSX_MeSA_B09 (Column B x Row 09
covers the area inside the boundaries:
N = 33º 45' S; S = 39º 22,5' S;
W = 82º 30' W; E = 75º 0' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
TerraBrasilis: www.terra-brasilis.org
| Filename: | Mesh_South_America__MeSA_B09.zip |
| License: | Freeware |
| Added: | 11th June 2007, 22:11:00 |
| Downloads: | 1,197 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 1.53 MB |
| Category: Flight Simulator X - Scenery | |
| Mesh South America / MeSA A01 |
|
File Description:
FSX Mesh South America Project:
This terrain mesh file is a part of a whole project covering all the Continent of South America and some islands, divided in tiles identified in a map by its column (letters) and rows (numbers).
Those files were multi-LOD compiled from 90m SRTM2 source data, reprocessed with 3DEM to remove voids and spikes, providing a 76.4m (LOD9) horizontal resolution topography intended for use only in FSX updated with SP1.
Although not well documented, to improve performance, the updated FSX loads DEM files in threads and only the closer terrain (about 5 NM from the point of view)is rendered in high detail, while at far distances FSX shows up its default low resolution mesh, when there is not a third part terrain mesh compiled in all others intermediate level of details (multi-LOD).
THIS FILE: FSX_MeSA_A01
(Column A x Row 01)
This file covers the area inside the boundaries:
N = 16º 52,5' N; S = 11º 15' N;
W = 90º 0' W; E = 82º 30' W;
AUTHORS:
Hely Heck Junior - Magrao ( [email protected] )
and Jose Lobo ( [email protected] )
TerraBrasilis: www.terra-brasilis.org
| Filename: | Mesh_South_America__MeSA_A01.zip |
| License: | Freeware |
| Added: | 11th June 2007, 00:03:00 |
| Downloads: | 1,960 |
| Author: | Hely Heck Jr. and José Lôbo |
| Size: | 49.55 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |