Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Aeritalia G91Y 8 Stormo |
|
Images related to this file:
File Description:
The Fiat G91Y was a reconnaissance and ground-attack aircraft produced by Italian company FIAT as an evolution of Fiat G91. The first flight took place in 1966. It was a complete redesign, but the major difference was that G91Y installed 2 engines, in order to increase the power and the capability to survive to damages during war operations. The single Bristol Orpheus turbojet engine of G91 was then replaced by two afterburning General Electric J85 turbojets which increased thrust by 60% over the single-engined variant.
Structural modifications to reduce airframe weight increased performance further and an additional fuel tank occupying the space of the G.91T's rear seat provided extra range. Combat manoeuvrability was improved with the addition of automatic leading edge slats.
Flight testing of three pre-production aircraft was successful, with one aircraft reaching a maximum speed of Mach 0.98.
Airframe buffeting was noted and was rectified in production aircraft by raising the position of the tailplane slightly.
An initial order of 55 aircraft for the Italian Air Force was completed by Fiat in March 1971.
The order was increased to 75 aircraft with 67 eventually being delivered.
The first pre-series 'Yankee' (the nickname of the new aircraft) flew in July 1968.
AMI (Italian Air Force) placed orders for two batches, 35 fighters followed by another 20, later cut to ten.
The last one was delivered around mid 1976, so the total was two prototypes, 20 pre-series and 45 series aircraft.
No export success followed.
These aircraft served with 101° Gruppo/8° Stormo (Cervia-S.Giorgio) from 1970, and later, from 1974, they served with
the 13° Gruppo/32° Stormo (Brindisi) until the early '90s, as the only ones equipped with the 'Yankee', using them as attack/recce machines, both over ground and sea, until the AMX replaced them.
HD textures in 4096 x 4096.
complete resize and paint 32bit HD.
Virtual cockpit HD.
Native model for FSX & P3D
| Filename: | Aeritalia_G91Y_8_Stormo.zip |
| License: | Freeware |
| Added: | 15th April 2017, 19:09:42 |
| Downloads: | 1,659 |
| Author: | Massimo Grassi |
| Size: | 109.01 MB |
| Category: Miscellaneous Files - General Utilities | |
| CONCORDE PERFORMANCE SYSTEM NEW GENERATION |
|
File Description:
CONCORDE PERFORMANCE SYSTEM
NEW GENERATION
CPS-NG (Concorde Performance System New Generation) is the successor to CPS-X, the essential flight preparation utility created in 2011
and discontinued in 2018.
Since the end of its development, still present on AVSIM despite a large number of unavailable functions, it has been downloaded more
than 3000 times.
This new CPS opus will satisfy the most demanding Concorde simulation enthusiasts.
CPS-NG now makes it possible to plan Concorde flights with the following simulators:
- FsLabs Concorde X for FSX, and P3D up to version 3.
- Colimata Concorde FXP for X-Plane and Gaston Reif's beautiful mod, Heritage Concorde Avionics Package.
With these simulators, CPS-NG can export waypoints to INS, payload and fuel to aircraft.
Like its illustrious predecessors, CPS-NG uses authentic Air France data and charts.
It offers a map of the flight including the navigation points, the points to protect from the supersonic bang, on departure and on
arriva.
The flight preparation stages are done in a user-friendly way.
the subsonic steps are configurable, the anti-noise procedures are calculated as in reality. The aircraft loading is modifiable by
the user in order to obtain the ideal centering.
The fuel is calculated as in reality and its distribution in the 11 tanks of Concorde complies with the filling law of Air France and
British Airways.
CPS-NG like its previous version also offers the user a flight report in the form of a PDF document which contains all the elements
necessary for the preparation of the aircraft.
it also offers Concorde-specific settings such as
- Initial climb angle.
- Time to anti noise procedure.
- Throttle levers angle during anti noise procedure.
- Fuel flow.
- Maximum pressure in P7 compressor.
- Trim adjustment and everything a pilot and flight engineer could want for a perfect flight.
CPS-NG also offers in the flight report, Take-off and landing forms in accordance with the real documents and the user has the choice
between the Air France form and the British Airways one.
Finally, CPS-NG allows the use of real-time weather from NOAA, personalized weather or the one generated by Active Sky 2016,
Active Sky for P3D and Active Sky for X-Plane 11 or 12.
In summary, here you have the ultimate tool for Concorde simulation.
NOTE: The manual curently in writing, thanks for your patience.
You dreamed it, we did it!
Break the sound barrier.
| Filename: | CONCORDE_PERFORMANCE_SYSTEM_NEW_GENERATION.zip |
| License: | Freeware, limited distribution |
| Added: | 20th July 2023, 05:20:23 |
| Downloads: | 135 |
| Author: | Pierre Chassang |
| Size: | 19.49 MB |
| Category: Miscellaneous Files - Miscellaneous Files | |
| CPS-NG RC 5 |
|
File Description:
CPS-NG (Concorde Performance System New Generation) is the successor to CPS-X, the essential flight preparation utility created in 2011
and discontinued in 2018.
Since the end of its development, still present on AVSIM despite a large number of unavailable functions, it has been downloaded more
than 3000 times.
This new CPS opus will satisfy the most demanding Concorde simulation enthusiasts.
CPS-NG now makes it possible to plan Concorde flights with the following simulators:
FsLabs Concorde X for FSX, and P3D up to version 3.
Colimata Concorde FXP for X-Plane and Gaston Reif's beautiful mod, Heritage Concorde Avionics Package.
With these simulators, CPS-NG can export waypoints to INS, payload and fuel to aircraft.
Like its illustrious predecessors, CPS-NG uses authentic Air France data and charts.
It offers a map of the flight including the navigation points, the points to protect from the supersonic bang, on departure and on
arrival
The flight preparation stages are done in a user-friendly way.
the subsonic levels are configurable, the anti-noise procedures are calculated as in reality. The loading of the plane is modifiable by
the user in order to obtain the ideal centering.
The fuel is calculated as in reality and its distribution in the 11 tanks of Concorde complies with the filling law of Air France and
British Airways.
CPS-NG like its previous version also offers the user a flight report in the form of a PDF document which contains all the elements
necessary for the preparation of the aircraft.
it also offers Concorde-specific settings such as initial climb angle, time until anti noise procedure, throttle levers angle during
anti noise procedure, fuel flow, maximum pressure in P7,
trim adjustment and everything a pilot and flight engineer could want for a perfect flight.
CPS-NG also offers in the flight report, Take-off and landing forms in accordance with the real documents and the user has the choice
between the Air France form and the British Airways one.
Finally, CPS-NG allows the use of real-time weather from NOAA, personalized weather or the one generated by Active Sky 2016,
Active Sky for P3D and Active Sky for X-Plane 11 or 12.
In summary, here you have the ultimate tool for Concorde simulation.
You dreamed it, we did it!
Break the sound barrier.
| Filename: | CPSNG_RC_5.zip |
| License: | Freeware |
| Added: | 10th August 2023, 15:48:00 |
| Downloads: | 78 |
| Author: | Pierre Chassang |
| Size: | 19.49 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Supermarine Spitfire R7143 |
|
Images related to this file:
File Description:
Repaint for the A2A Wings of Power III Spitfire by Jan Kees Blom, based on the paintkit by Martin Catney: Supermarine Spitfire R7143 was built as a Mk.1 in 1941 as presentation aircraft 'Wallsall I', and was converted to a MK.PR IV, and flew with 140 squadron. She was involved in a landing accident in early 1942, but was repaired and shipped to Canada in january 1943. Here she served with 13 squadron in Rockcliffe, Ontario, before being damaged again in a landing accident in september 1944. Repairs kept her on the ground until june 1945. She was displayed in a silver scheme after the war during the Air Show in Toronto, 1946, and later flew Air Search Rescue missions. Her last flight was in october 1947, after which she became an instuctional airframe at the RCN air electrical school. She was scrapped here in 1950.
| Filename: | Supermarine_Spitfire_R7143.zip |
| License: | Freeware |
| Added: | 9th February 2011, 16:10:08 |
| Downloads: | 271 |
| Author: | Jan Kees Blom |
| Size: | 10.07 MB |
| Category: Civil Flight Simulators - Looking Glass Flight Unlimited 3 | |
| Visual GTL Editor |
|
Images related to this file:
File Description:
This is a standalone program that allows you to change the terrain textures of outer terrain megatiles by applying altitude based rule changes. This means that the Editor allows you to do what FU3 does through the RULES.TXT file but in visual form and on a per tile basis. The Editor converts and displays l0xxxx.gtl files and their corresponding l5xxxx.geo elevation files to 512x512 bitmaps. It also displays useful information when moving the mouse across the main display, i.e. Min Alt, Max Alt, Alt Range, Alt Index, Texture and so on. The Index value is an altitude range corresponding to the 64 colours used to create the elevation bitmap and is useful when specifying Min Alt and Max Alt values for rule changes. You can apply up to 8 rule changes at a time (just repeat until you get the desired results), either to the entire tile or to a subsection defined as X and Y co-ordinates. The Editor displays X-origin and Y-origin values within the tile as an aid to this. You can use this with the default 13 textures or with my extended 26 textures.
| Filename: | Visual_GTL_Editor.zip |
| License: | Freeware |
| Added: | 29th June 2011, 21:14:30 |
| Downloads: | 76 |
| Author: | Jonathan Stonehouse |
| Size: | 2.76 MB |
| Category: X-Plane - Original Aircraft | |
| Piaggio P180 Avanti II |
|
Images related to this file:
File Description:
Features:
-Flight model within 10% of the real aircraft (as per manual);
-Autopilot operations as the real aircraft;
-Many functions and screen indications are SASL driven;
-X-Plane 10 64 bit full compatible;
-Main landing gear object has added (was missing for XP10 in the previous version);
-Electronic checklist in MFD;
-Real clock functions;
-Engine indication turn red when limits exceeded;
-UFMC and X-FMC config files are included. Those files have been adapted specially for this aircraft;
-New 2-page checklist to be printed in a single sheet;
-Updated Operating manual;
-You can use now the condition levers and flap lever by mouse.
PAY ATTENTION:
Use caution when using the throttles! As in the real aircraft, be advancing the throttles too full, torque limits can be exceeded by a lot!
PLEASE: Any questions or problems post them to the forum for this aircraft. I'm visiting it daily so I can respond as quick as possible.
At last, I want to THANK Tony Day, who, with his experience and work, helped me to make this aircraft as real as possible.
| Filename: | Piaggio_P180_Avanti_II.zip |
| License: | Freeware |
| Added: | 24th April 2013, 23:20:42 |
| Downloads: | 631 |
| Author: | Ilias Tselios |
| Size: | 49.42 MB |
| Category: X-Plane - Scenery | |
| RAF Gutersloh ETUO |
|
Images related to this file:
File Description:
File Description:
X-Plane 11 Scenery - RAF Gutersloh AB (ICAO: ETUO)
The scenery represents the former airbase of RAF Gutersloh, one of the most populated military bases in West Germany during the Cold War, due to its location near the former East/West border. This scenery reflects the era at the end of the 1980s/beginning of the 90s, when the Harrier GR3 was in operation there, along with Chinook helicopters.
The airfield was built in 1935 and was used by the German Air Force during WW2, flying the Junkers JU-86 and Heinkel H-111. The first British squadrons were stationed there from 1947, with Mosquitos, Vampires and then Canberras.
The first Harrier arrived at Gutersloh in January 1977 and 3 and 4 Squadrons became resident until their farewell in 1993, after the cold war had ended. The airfield is currently used by the British army, but they will leave in 2014 to relinquish the area to the Government of Gutersloh for civil usage.
High detailed scenery by Manfred Schyma and Pete Beeby, supported by the Airfield Construction Group. X-Plane Version designed by Dietmar Hanne
| Filename: | RAF_Gutersloh_ETUO.zip |
| License: | Freeware |
| Added: | 25th May 2018, 23:53:43 |
| Downloads: | 265 |
| Author: | Dietmar Hanne |
| Size: | 142.94 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Modern Stripes Repaint of FSX Cessna 172 |
|
File Description:
This is a repaint only for the stock Cessna 172 in Flight Simulator X. (This will 'not' work in FS2004. This is a DDS texture set). This repaints the default Cessna to a modern Cessna paint stripe scheme. This uses the stock instrumentation, not the Garmin system, though that is very easily adapted. Remember to turn off 'Show Aircraft ID' as this aircraft features its own Registry in the paint scheme. By William Ortis. For more addons by Lionheart Creations Ltd, go here; www.lionheartcreations.com
| Filename: | Modern_Stripes_Repaint_of_FSX_Cessna_172.zip |
| License: | Freeware, limited distribution |
| Added: | 11th October 2007, 22:19:24 |
| Downloads: | 1,760 |
| Author: | William Ortis |
| Size: | 6.8 MB |
| Category: Flight Simulator X - Utilities | |
| Key2LAN Universal 1.06 |
|
File Description:
This program can be used to convert user-defined keypresses into mouse's actions or keystrokes, and to send them to remote computers. Users of multiple computers may find it useful for controlling software (for example simulated instruments and gauges) running on networked PCs. This utility has been specifically developed for Microsoft Flight Simulator X, but may work in other simulators or games as well. Used in demo mode, handles a maximum of 3 macros for 10 minutes per session (restart the program to get additional time).
| Filename: | Key2LAN_Universal_106.zip |
| License: | Shareware, time limited |
| Added: | 3rd January 2008, 14:46:41 |
| Downloads: | 217 |
| Author: | Luciano Napolitano |
| Size: | 1.94 MB |
| Category: Flight Simulator X - Scenery | |
| USA West Mountain Landclass |
|
File Description:
The Landclass File is a stand alone scenery, you can use it with the FS Standart Scenery or other Landclass files like Cloud9, FS Genesis etc.
Now you will see rocky mountain Landclasses in the USA.
Green mountains are now past!! You get now the feeling to fly over high mountains and not over green hills.
The best results you get with FS Global or another good mesh like My World X
Installation:
Extract to the folder of FSX and activate the scenery in FSX
| Filename: | USA_West_Mountain_Landclass.zip |
| License: | Freeware |
| Added: | 15th March 2008, 09:51:35 |
| Downloads: | 2,375 |
| Author: | Markus Balz |
| Size: | 148.57 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |