Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Utilities | |
| FS2004/FSX Flight Analyzer Utility V2.04 |
|
Images related to this file:
File Description:
NOW ALSO WORKING WITH FS2004
What this program do:
- quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc.
- start a failure sytem, such as gear, flaps, engine, etc.
- freeze the time, so you can fly in a for everlasting sunset.
- runway detecting system to see wich runways are in use.
- a flight analysis system, this is automaticly started when you start FsQC.
- When flight analysis is finished you can print a report, the report is automaticly saved as pdf File.
- flight analysis is finished when you parked your aicraft with the parking brakes set for more then 5 seconds.
- graphical landingchart.
- load a existing flight or flightplan.
- quickly look to your CFG (settings) files (only FSX) and change them even before the flight simulator is running.
- After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.
- for properly working, flight analysis require a fsx/fs2004 flightplan.
Flight analysis:
Flight analysis start recording at the moment when you begin taxiing.
It gives you huge information such as:
- takeoff- and landing-weight
- takeoff roll in m. or ft.
- separate fuel consumption in taxi, climb, cruise and descent.
- maximum banking in flight
- which speed you using the flaps and gear
- when autopilot on or off
- vertical speed on touchdown
- reverser set after landing
- wich speed you cancel reverser
- bouncing at landing
- graphical landingchart.
- and lots of more
You can better look the example of the pdf document located in the 'Flight Reports' folder.
Failures:
In the settings menu you can select the kind of failures you want to occur and when they must occur.
At this moment 10 failures are possible:
-altitude
-attitude
-heading
-airspeed
-vertical speed
-pitot
-fuelleak
-flaps
-engine
-gear
Recommended:
For more easy use, run this program on a second monitor or much better on a second computer(laptop) where FSUIPC-client is running in the same network where FSX/FS2000 is running and FSUIPC WideFs is registered.
See also the pdf Manual.
Also look at www.FsQC.eu for more information.
If you have a problem look first on www.fsqc.eu/faq.html
If you have questions please contact [email protected]
| Filename: | FS2004FSX_Flight_Analyzer_Utility_V204.zip |
| License: | Check within download |
| Added: | 5th March 2018, 22:40:20 |
| Downloads: | 330 |
| Author: | Evander Tholen |
| Size: | 2.45 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FSX/P3D TAI DC-3 1962 |
|
Images related to this file:
File Description:
This is a repaint of the DC-3 in TAI (Transports Aeriens Intercontinentaux) colors. The freeware DC-3/C-47 v3 by Manfred Jahn is needed for this repaint. In 1946 the French government allowed the creation of some independent air carriers. On June 1 of that year TAI (Transports Aeriens Internationaux) was formed, and was based in Orly, France. Flights began on July 1, with a Junkers Ju-52. The following year they purchased 7 ex KLM DC-4s, along with 3 Bristol 170 freighters. In 1954 DC-6Bs started to replace the DC-4s. Their route network serviced mainly Africa, the Far East, the French Pacific territories, and Australasia. Prior to 1956 their network wa mainly in Africa, and Asia. On May 6, 1960, a partnership was formed with Air France, whereby TAI flew the South Pacific leg of the state carrier’s around the world service via New Caledonia and Tahiti. Later, on September 4 1960, TAI began a Douglas DC-8-32 service from Paris to Darwin via Athens, Teheran, Karachi, Bangkok, Phnom Penh, and Saigon, and on September 12, it inaugurated a route from Sydney to Los Angeles via Noumea, Nandi, Papeete, and Honolulu with the DC-8. On September 14 1961, TAI agreed, in principle, to a future merger with Union Aeromaritime de Transport (UAT). The two airlines integrated their schedules in 1962 and the amalgamation of TAI and UAT was completed on October 1, 1963, resulting in a new airline: UTA (Union de Transports Aeriens). This DC-3, F-BGXN, flew for TAI from 1956 to 1959. Textures are DXT5. This repaint was tested on FSX-SE and should work on FSX & P3D v1-3.
| Filename: | FSXP3D_TAI_DC3_1962.zip |
| License: | Freeware |
| Added: | 19th March 2019, 17:01:24 |
| Downloads: | 185 |
| Author: | Ted Giana |
| Size: | 8.29 MB |
| Category: Prepar3D V1-4 - AI Aircraft | |
| FSX/P3D FAIB A320IAE Avia Traffic |
|
Images related to this file:
File Description:
Textures only for FAIB A320 IAE. Model and paint kit by FAIB. Tested day and night with P3Dv4. Painted by Joel Branchu for real traffic with the registrations. June 2019.
| Filename: | FSXP3D_FAIB_A320IAE_Avia_Traffic.zip |
| License: | Freeware |
| Added: | 17th June 2019, 17:05:54 |
| Downloads: | 172 |
| Author: | Joel Branchu |
| Size: | 1.16 MB |
| Category: Flight Simulator X - Scenery | |
| FSX An Idaho Mountain Flying adventure |
|
Images related to this file:
File Description:
Welcome to the Heart of Idaho!
The mountain country has to be seen to be believed. As one who grew up exploring
this part of the US I had the fortunate opportunity to do things that most just dream about. Who wouldn't want to
swim in hot-spring fed lakes, or pools? Idaho has more hot springs than any other state. Have you ever climbed up
to a pass at 10,000 feet? And then looked down at those who chose not to climb 1500 feet below, looked left at your
brother, and then looked over the pass at the mountain basin that begged to be explored. I did these things 58 years
ago. You can do it tomorrow if you want to.
This FSX adventure will take you to many places I have visited. It will also take you to places that I have not yet
visited. Some of the strips are difficult to get into. That is typical of mountain flying. Some are reasonable.
Your flying skills will be tested as you figure out the best approach.
The simulation consists of 19 airports in Central Idaho. Twelve existing strips have had improvements consisting of
strip surface improvements to allow all-season activity, and some eye candy. Seven new air facilities have been
added to the area.
| Filename: | FSX_An_Idaho_Mountain_Flying_adventure.zip |
| License: | Freeware, limited distribution |
| Added: | 29th January 2019, 18:38:19 |
| Downloads: | 188 |
| Author: | Brett Delana |
| Size: | 3.94 MB |
| Category: Flight Simulator X - Scenery | |
| FSX Grand Canyon North Rim Simulation |
|
Images related to this file:
File Description:
Welcome to the North Rim of the Grand Canyon!
This scenery is a mostly fictitious representation of what the North Rim might look like of it had been developed like the South rim. A new airport (KKPA, Kaibab Plateau Airport) is the centerpiece. It sits at 8,730 ft MSL so density altitude is a real issue. Runway 17/35 is 6,500ft long so biz jets can get in and out safely. A new resort sits atop the ridge to the east [Eagle's Nest]. There is a helipad for access. An NDB makes finding it easier [AZ95 220.9 kHz]. Or you can just follow the traffic on the access road that branches off from highway 67 just south of the airport. To the north I have added a gravel strip to Jacob Lake where 67 joins 89A. Runway 14/32 is 3000 ft long and sits at 7900 ft MSL. An NDB [AZ93 393 kHz] is included. At the south end of Highway 67 sits the North Rim Visitor Center. There is a helipad on the roof for those who like rotary wing challenges. The NDB is AZ94 at 423.4 kHz. The entire length of Highway 67 is represented with traffic going both ways. You will see
air traffic from KGCN at the South Rim and traffic between KKPA and Jacob Lake.
| Filename: | FSX_Grand_Canyon_North_Rim_Simulation.zip |
| License: | Freeware, limited distribution |
| Added: | 19th May 2021, 19:28:12 |
| Downloads: | 99 |
| Author: | Brett Delana |
| Size: | 16.26 MB |
| Category: Flight Simulator X - Scenery Design | |
| Flag Animation Tutorial for FSX Scenery |
|
Images related to this file:
File Description:
At the start it looked almost impossible.
I was one of many scenery creators who
kept asking and spending valuable time for
the creation of flag animation for FSX.
This tutorial will help you to understand
the principals and the procedure of creating
and importing group of animated flags into FSX.
| Filename: | Flag_Animation_Tutorial_for_FSX_Scenery.zip |
| License: | Freeware |
| Added: | 3rd May 2010, 00:45:12 |
| Downloads: | 1,263 |
| Author: | Serdar Nuzhet |
| Size: | 1.17 MB |
| Category: Flight Simulator X - Flight Plans | |
| FSX World Explorers Lewis and Clark |
|
Images related to this file:
File Description:
The Lewis and Clark Expedition from May 1804 to September 1806, also known as the Corps of Discovery Expedition, was the first American expedition to cross the western portion of the United States. The Corps of Discovery was a selected group of US Army volunteers under the command of Captain Meriwether Lewis and his close friend Second Lieutenant William Clark.
President Thomas Jefferson commissioned the expedition shortly after the Louisiana Purchase in 1803
| Filename: | FSX_World_Explorers_Lewis_and_Clark.zip |
| License: | Freeware |
| Added: | 27th February 2020, 19:37:04 |
| Downloads: | 55 |
| Author: | Nis Verkijk |
| Size: | 115.1 KB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| FSX/P3D TWA 727-231 1978 |
|
Images related to this file:
File Description:
This is a repaint of the 727-231 in TWA 'Star Stream' Double Globe colors. The freeware 727-200 by Thomas Ruth is needed for this repaint. The 727-200 was definitely the airliner of the 1970s through to the 1990s. It was everywhere. There were not many airlines without it, and TWA was no exception. They operated a total of 61 727-200s from 1968 to the new millennium in 2000. N54326, was purchase new from Boeing in February 1970 and released by the carrier in 1997. Textures are 32bit DDS. This repaint was tested on P3Dv3. It should work on FSX & FSX-SE.
| Filename: | FSXP3D_TWA_727231_1978.zip |
| License: | Freeware |
| Added: | 27th November 2019, 18:57:29 |
| Downloads: | 149 |
| Author: | Ted Giana |
| Size: | 10.35 MB |
| Category: Prepar3D V1-4 - Aircraft Repaints, Textures and Modifications | |
| FSX/P3D Dassault Falcon 50 (N5107) |
|
Images related to this file:
File Description:
Textures only - requires original model from Flysimware. Paint is based on a real world aircraft N5107 based out of Portland OR. Thanks to Steve Drabek and Marius Krämer for input on painting techniques. Enjoy - she's a fantastic plane...
| Filename: | FSXP3D_Dassault_Falcon_50_N5107.zip |
| License: | Freeware |
| Added: | 3rd December 2018, 17:16:57 |
| Downloads: | 565 |
| Author: | Scott Brunner |
| Size: | 4.2 MB |
| Category: Flight Simulator X - Scenery | |
| FSX Scenery--Landclass For Santa Barbara |
|
Images related to this file:
File Description:
FSX Scenery--Landclass For Santa Barbara, CA. Scenery and landclass for Santa Barbara California. This is a detailed landclass and scenery add-on to use with FSX CCCFSX Scenery by Al Wheeler. The scenery and landclass will work without adding Al's scenery. The changes that have been created will make for excellent VFR flying. Hundreds of objects have been added that reflect the real layout and scenery for this location.
| Filename: | FSX__SceneryLandclass_For_Santa_Barbara.zip |
| License: | Freeware |
| Added: | 5th September 2012, 00:23:45 |
| Downloads: | 540 |
| Author: | Charles Reid |
| Size: | 5.24 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |