Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator 2004 - Aircraft Repaints, Textures and Modifications | |
| Trans Orient Pacific (TOPAC) Douglas DC-4 N4665V |
|
File Description:
This is a repaint of one of the 2 aircraft used in the film "The High and The Mighty" (John Wayne and Robert Stack - 1954). This aircraft actually flew in this paint around Los Angeles and the bay area of southern California in November of 1953 for in-flight footage, so it's entirely fictional...but the airline was.
The original repaint was by Dave McQueen for Jens B. Kristensen's DC-4/C-54 version 2.0. I have updated it to make it compatable with the Jens' new version 2.1 (DC4_v21.zip) to use the DC-4-1009 airfile. Load your plane with 3050 gallons of fuel and balance out passengers and cargo to total 73,000 lbs. and you can duplicate flight #420 in the film! If you wish to shut down engine #1 and dump 200 gallons of fuel from the left wing and see if you can still get to San Fransico from Honolulu, that's up to you..but it is a challenge. Enjoy!This repaint requires Jens B. Kristensen's DC-4/C-54 version 2.1 (DC4_v21.zip)
| Filename: | Trans_Orient_Pacific_TOPAC_Douglas_DC4_N4665V.zip |
| License: | Freeware |
| Added: | 22nd July 2008, 14:04:16 |
| Downloads: | 470 |
| Author: | Randy Cain, Dave McQueen |
| Size: | 1.61 MB |
| Category: Flight Simulator X - Scenery | |
| YBLT - Ballarat Aerodrome - Victoria, Australia |
|
Images related to this file:
File Description:
YBLT (Ballarat Aerodrome) is a regional 'airport' in the central west of the State of Victoria, Australia and utilises infrastructure from the days of RAAF operations which lasted till the early 1960's. Thus the buildings are now a bit outdated but this file does not reflect that as I have not done any custom texturing so everything in this package tends to look a bit new and crispy.
Note the name of this 'airport'. The locals are adamant it is an aerodrome, not an airport. I have not found any freeware or commercial offerings for an alternative to the default and so I have put one together.
This is a reasonable approximation of the airport /aerodrome but is not entirely accurate as the hangars/buildings I have modelled myself are generic ones I have done and do not look exactly like the ones at that facility. The connecting road is not in true alignment as I have created it so as it blends into the surrounding default scenery.
| Filename: | YBLT__Ballarat_Aerodrome__Victoria_Australia.zip |
| License: | Freeware |
| Added: | 21st October 2014, 01:51:16 |
| Downloads: | 839 |
| Author: | Robert Budd |
| Size: | 4.43 MB |
| Category: Prepar3D V1-4 - Scenery | |
| Piarco International Airport - TTPP V1.2 |
|
File Description:
TTPP v1.2 - In this version, problems with markings in tax lanes have been fixed. The textures of the taxi stands have also been redone. More vehicles and vegetation were included.
Piarco International Airport (IATA: POS, ICAO: TTPP) is an international airport serving the island of Trinidad and is one of two international airports in Trinidad and Tobago. The airport is located 30 km (19 mi) east of Downtown Port of Spain, located in the adjacent town of Piarco. It is the seventh busiest airport in the Caribbean in terms of passengers served[6] and third busiest in the English-speaking Caribbean, after Sangster International Airport and Lynden Pindling International Airport. The airport is also the primary hub and operating base for the country's national airline, as well as the Caribbean's largest airline, Caribbean Airlines.
Piarco International Airport has direct scheduled service to destinations in the United States, Canada, Central America, South America and Europe. It is also a significant transit hub for the Southern Caribbean and serves as the primary connection point for many passengers travelling from Guyana.
| Filename: | Piarco_International_Airport__TTPP_V12.zip |
| License: | Freeware |
| Added: | 4th February 2022, 03:49:10 |
| Downloads: | 560 |
| Author: | Eduardo Puelker |
| Size: | 53.65 MB |
| Category: Flight Simulator 2004 - AI Flight Plans | |
| United States Coast Guard USCG CGAS Borinquen |
|
Images related to this file:
File Description: Welcome to the first release of the United States Coast Guard complete Air
http://www.hovercontrol.com/cgi-bin/ifolio/imageFolio.cgi?action=view&link=FS9_Helicopter_Downloads&image=uscghh65pack.zip&img=0&search=Keith%20Devins&cat=all&tt=zip&bool=phrase
Station package. All 25 Air Stations plus 2 Air Facilities and will be
included as the releases come out weekly. All rotor and fixed wing aircraft and
their respective stations are included with complete custom paints and
flightplans! A number of people have assisted in this endeavor that started 11
months ago but my biggest thanks goes to LCDR. Wilson of the United States Coast
Guard. This first package requires a one time download of the file only
from Antti Pankkonen remodeled into the Dolphin by John Devins and Keith Devins.
You must read the readme files! Enjoy, Semper Paratus!
For FS2004 and FSX
Base file package required can be found here:
uscghh65pack.zip
| Filename: | United_States_Coast_Guard_USCG_CGAS_Borinquen.zip |
| License: | Freeware, limited distribution |
| Added: | 13th September 2013, 08:05:27 |
| Downloads: | 904 |
| Author: | Ryan Cobb |
| Size: | 948.9 KB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Piaggio P-166A |
|
File Description:
The second of the coming P-166 aircraft series. I'm going to built the whole family of these graceful twins.
The Piaggio P-166A is a light small twin. An Exotic two-engined prop that sold all over the world including America, UK, and Australia. Its origin is traced Back to the Piaggio P-136, a light anphibian, wich the P-166 keeps the wings, the engines and the tailplanes. The first P-166A flew in November 1957. The aircraft is still in production in a slightly modified turboprop version, the P-166D-P1.
This model is 788 Kbs with c.a. 23000 polygons in c.a.170 assemblies. (see something in common with the previous one? YES: 99%...) Features Clickable Dynamic VC with non-planar throttle quadrant. Detailed internals. Fully compatible with FS 2002 (pro edition)
Not said about the M version!! The flight Dynamics is based on real data, provided by Piaggio Itself: control surfaces, engines, weights, etc...
Paints:
1)FIAT - I-NCAS
2)AGIP Mineraria I-MINT
3)Papuan Airlines VH-PND
4)Northrop corp. - N7651E
| Filename: | Piaggio_P166A.zip |
| License: | Freeware |
| Added: | 1st November 2003, 19:12:21 |
| Downloads: | 4,938 |
| Author: | Mario Noriega |
| Size: | 7.72 MB |
| Category: Flight Simulator X - Sounds | |
| Douglas DC-8-63 P&W JT3D-7 Sound Pack |
|
File Description:
SkyHigh Audio Simulations is proud to present what is quite possibly the most realistic sounding Pratt & Whitney JT3D-7 Turbofan sound pack available! This sound pack is designed to work with Historic Jetliners Group's Douglas DC-8-63 model. There are two versions of this sound pack, one interior point of view from the cockpit, and the other being the passenger cabin POV in front of the engines. This sound pack includes many unique and realistic features, including realistic 3D sound cones giving a very realistic exterior sound experience, especially in the fly-by view mode. Also using the cone technology, realistic distant taxi howling and distant rumbling sounds are included. The plane could be heard loud and clear from up to 2km away in tower view! Realistic start up sounds featuring external air cart compressor howling noises are included. Realistic interior ambience noises such as the inverter noise and touchdown, flaps, gear sound with chime, and more are featured in this sound pack. Please visit our website at: www.skyhighflightsim.webs.com for more info and sound packs!
| Filename: | Douglas_DC863_PW_JT3D7_Sound_Pack.zip |
| License: | Freeware |
| Added: | 3rd September 2011, 04:27:55 |
| Downloads: | 3,082 |
| Author: | Adam Murphy and Jesse Casserly - Skyhigh Audio Simulations |
| Size: | 43.51 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Atlantic City International Airport (KACY), NJ |
|
File Description:
Located 09 miles NW of Atlantic City, New Jersey on 5000 acres of land, Atlantic City International Airport is a major airport serving the southern portion of New Jersey. It is also one of the main gateways for tourists looking to vacation in nearby Atlantic City, famous for its boardwalks and casinos. This airport has been very heavily modeled with many surrounding buildings and all aprons properly placed. Gates are all properly located and labeled according to the terminal chart (there are, however, no jetways like in the default scenery). General Aviation parking is available in its proper area � all aircraft in the parking area (middle of the tarmac) have collision disabled. If you select Military Cargo parking you will start on one of the helipads in the Coast Guard section. If you select Military Combat parking you will start next to the line of F-16s on ready-alert over on the Air National Guard tarmac. You can also start on a helipad north of the airport. This airport also features completely custom taxiway line and edge lighting. Because this airport uses ATC, it suffers the same bug as my KEWR airport, which is that you cannot receive taxi in directions from ATC � to gate, parking or fuel. Almost all arriving AI aircraft will also disappear from the taxiway after radioing in to ATC and failing to receive taxi instructions to the gate/parking. All traffic and instructions taxiing out works fine. All gate parking spaces have fuel, as well as the military parking and north helipad. GA aircraft can get fuel by taxiing over to the fuel station north of the GA tarmac. Taxiing onto a closed runway (marked with an �X�) will cause a crash. Broken-down taxiways are not good for your undercarriage!
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Atlantic_City_International_Airport_KACY_NJ.zip |
| License: | Freeware |
| Added: | 1st February 2011, 10:28:53 |
| Downloads: | 1,355 |
| Author: | Drew Sikora |
| Size: | 5.12 MB |
| Category: Miscellaneous Files - General Utilities | |
| CONCORDE PERFORMANCE SYSTEM NEW GENERATION |
|
File Description:
CONCORDE PERFORMANCE SYSTEM
NEW GENERATION
CPS-NG (Concorde Performance System New Generation) is the successor to CPS-X, the essential flight preparation utility created in 2011
and discontinued in 2018.
Since the end of its development, still present on AVSIM despite a large number of unavailable functions, it has been downloaded more
than 3000 times.
This new CPS opus will satisfy the most demanding Concorde simulation enthusiasts.
CPS-NG now makes it possible to plan Concorde flights with the following simulators:
- FsLabs Concorde X for FSX, and P3D up to version 3.
- Colimata Concorde FXP for X-Plane and Gaston Reif's beautiful mod, Heritage Concorde Avionics Package.
With these simulators, CPS-NG can export waypoints to INS, payload and fuel to aircraft.
Like its illustrious predecessors, CPS-NG uses authentic Air France data and charts.
It offers a map of the flight including the navigation points, the points to protect from the supersonic bang, on departure and on
arriva.
The flight preparation stages are done in a user-friendly way.
the subsonic steps are configurable, the anti-noise procedures are calculated as in reality. The aircraft loading is modifiable by
the user in order to obtain the ideal centering.
The fuel is calculated as in reality and its distribution in the 11 tanks of Concorde complies with the filling law of Air France and
British Airways.
CPS-NG like its previous version also offers the user a flight report in the form of a PDF document which contains all the elements
necessary for the preparation of the aircraft.
it also offers Concorde-specific settings such as
- Initial climb angle.
- Time to anti noise procedure.
- Throttle levers angle during anti noise procedure.
- Fuel flow.
- Maximum pressure in P7 compressor.
- Trim adjustment and everything a pilot and flight engineer could want for a perfect flight.
CPS-NG also offers in the flight report, Take-off and landing forms in accordance with the real documents and the user has the choice
between the Air France form and the British Airways one.
Finally, CPS-NG allows the use of real-time weather from NOAA, personalized weather or the one generated by Active Sky 2016,
Active Sky for P3D and Active Sky for X-Plane 11 or 12.
In summary, here you have the ultimate tool for Concorde simulation.
NOTE: The manual curently in writing, thanks for your patience.
You dreamed it, we did it!
Break the sound barrier.
| Filename: | CONCORDE_PERFORMANCE_SYSTEM_NEW_GENERATION.zip |
| License: | Freeware, limited distribution |
| Added: | 20th July 2023, 05:20:23 |
| Downloads: | 130 |
| Author: | Pierre Chassang |
| Size: | 19.49 MB |
| Category: Flight Simulator 2004 - Original Aircraft | |
| Caproni-Vizzola C-22J Ventura |
|
Images related to this file:
File Description:
The Machine:
A fully aerobatic, very-light Jet that compares to the Bede BD-5J, but heavier and sporting two instead of one TRS-18 turbojets. Up to Mach 0.47 and 650 NM of range, with a service ceiling of 25000ft. A low stall speed (for a jet) makes the aircraft good for short field operations.
Certified for VFR operations only, yet includes a good avionics suite.
This is a "Classic" aircraft featuring "Steam" gauges and radios. Yet, controls and systems are easy to operate.
The History:
The C-22J is the last aircraft to be adorned with the legendary Caproni name. Originally known as "Caproncino", then marketed as "Ventura". A very-light jet developed in the 1980s as a military trainer, surveillance and reconnaissance aircraft. Powered by two TRS-18 turbojets fed from a dorsal NACA intake, the aircraft reached Mach 0.47 and was fully aerobatic. The airframe shows its origin in a glider design, the Caproni A-21 Calif. After the merger with SIAI Marchetti, the project was cancelled in favor of the SF-260.
The Simulation - 3D Model:
This aircraft ships with a 3-D cockpit, that incorporates realistic night lighting, in the form of a dim dome flood light, backlit gauges and luminous digital displays. The flight crew of 2 is affected by your input in the payloads menu of Flight Simulator, allowing to choose between male, female or empty seats. The Copilot Figure can be hidden with a quick click in the internal 3D view as well.
The Simulation - Realism:
This aircraft has been tuned with the invaluable help of Engineer Carlo Ferrarin, who created the real aircraft. Unique and one-off documentation has been kindly provided, and used extensively, for the creation of this product!
Just like the real aircraft, the systems are simple and of easy operation. Engines can be started with the press of a button. Systems modelling allows the following of real-world checklists as closely as Flight Simulator allows. An in-sim checklist is included, as well as a full flight manual.
The flight model is tuned with advanced aerospace techniques, resulting in a highly realistic aircraft, yet, it is very pleasant to fly, both during aerobatic displays or "A to B" cruising.
Highlights:
- High-Resolution 3D cockpit
- Full Documentation
- Aerobatic
FS-2004 Version comes with limited support and is free due to platform limitations. See Readme. FS-X & P3Dv4 (64-bit) versions are commercial products.
| Filename: | CaproniVizzola_C22J_Ventura.zip |
| License: | Freeware, limited distribution |
| Added: | 7th November 2020, 18:31:45 |
| Downloads: | 677 |
| Author: | Mario Noriega |
| Size: | 157.85 MB |
| Category: Miscellaneous Files - Miscellaneous Files | |
| CPS-NG RC 5 |
|
File Description:
CPS-NG (Concorde Performance System New Generation) is the successor to CPS-X, the essential flight preparation utility created in 2011
and discontinued in 2018.
Since the end of its development, still present on AVSIM despite a large number of unavailable functions, it has been downloaded more
than 3000 times.
This new CPS opus will satisfy the most demanding Concorde simulation enthusiasts.
CPS-NG now makes it possible to plan Concorde flights with the following simulators:
FsLabs Concorde X for FSX, and P3D up to version 3.
Colimata Concorde FXP for X-Plane and Gaston Reif's beautiful mod, Heritage Concorde Avionics Package.
With these simulators, CPS-NG can export waypoints to INS, payload and fuel to aircraft.
Like its illustrious predecessors, CPS-NG uses authentic Air France data and charts.
It offers a map of the flight including the navigation points, the points to protect from the supersonic bang, on departure and on
arrival
The flight preparation stages are done in a user-friendly way.
the subsonic levels are configurable, the anti-noise procedures are calculated as in reality. The loading of the plane is modifiable by
the user in order to obtain the ideal centering.
The fuel is calculated as in reality and its distribution in the 11 tanks of Concorde complies with the filling law of Air France and
British Airways.
CPS-NG like its previous version also offers the user a flight report in the form of a PDF document which contains all the elements
necessary for the preparation of the aircraft.
it also offers Concorde-specific settings such as initial climb angle, time until anti noise procedure, throttle levers angle during
anti noise procedure, fuel flow, maximum pressure in P7,
trim adjustment and everything a pilot and flight engineer could want for a perfect flight.
CPS-NG also offers in the flight report, Take-off and landing forms in accordance with the real documents and the user has the choice
between the Air France form and the British Airways one.
Finally, CPS-NG allows the use of real-time weather from NOAA, personalized weather or the one generated by Active Sky 2016,
Active Sky for P3D and Active Sky for X-Plane 11 or 12.
In summary, here you have the ultimate tool for Concorde simulation.
You dreamed it, we did it!
Break the sound barrier.
| Filename: | CPSNG_RC_5.zip |
| License: | Freeware |
| Added: | 10th August 2023, 15:48:00 |
| Downloads: | 73 |
| Author: | Pierre Chassang |
| Size: | 19.49 MB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |