Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - Utilities | |
| FS2004/FSX Flight Analyzer Utility V3.05 |
|
Images related to this file:
File Description:
Flight Data Recorder, now with a Pilot Logbook. This utility can do the following: analyze your flight from departure to your destination, and the landing with a graphical landing chart; when flight analysis is finished you can print a report, the report is automaticly saved as a pdf file; quickly change the settings of FSX, such as time, date, fuel, weight, traffic etc.; start a failure sytem, such as gear, flaps, engine, etc.; runway detecting system to see which runways are in use; load an existing flight or flight plan; quickly look to your CFG (settings) files and change them even before the flight simulator is running; after a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour; and lots of more. Require FSUIPC. Note: requires paid activation for use of flight analyzer, landing analysis and pilot logbook. Register and you have 1 month free. By Evander Tholen.
| Filename: | fsqc305.zip |
| License: | Shareware, limited functionality |
| Added: | 25th December 2018, 21:09:17 |
| Downloads: | 153 |
| Author: | Evander Tholen |
| Size: | 3.01 MB |
| Category: Flight Simulator X - Utilities | |
| Flight Simulator First Officer V2 |
|
Images related to this file:
File Description:
Flight Simulator First Officer is a generic virtual copilot that can be used with any aircraft. The primary
function of FSFO is to assist the Pilot In Command (PIC) to fly the aircraft safely while adhering to
Standard Operating Procedures (SOPs). This is accomplished via virtual checklist and sharing of cockpit
duties/responsibilities. Specifically, the First Officer reads the following configurable checklist:
- Pre-Flight
- Before Start
- After Start
- Before Takeoff
- In-Range
- After Landing
- Shutdown
After reading the checklist item, the Copilot will wait to ensure you (i.e. the pilot) have configured the
aircraft correctly before proceeding to the next item. Also, the Virtual copilot is capable of performing
the following actions:
1. Call Vspeeds based on your input
2. Raise/Lower the Landing Gear on Takeoff/Landing
3. Retract the Flaps
4. Extend the Flaps
5. Manage the taxi/landing/strobe lights
6. Tune the ILS frequencies
7. Call Climb Power based on your input
8. Reset Vertical Speed when the Aircraft is within 1000 ft of the programmed altitude
9. IAS warning (e.g. Aircraft is above 250 IAS while below 10000 ft)
10. GS Warnings (e.g. Aircraft is above 25 knots while taxing)
11. Resets the altimeter to standards when passing TA
12. Engage Heading Hold on Takeoff
13. Engage Altitude Hold on Takeoff
14. Reset Speed on Takeoff
15. Engage Speed Hold on Takeoff
16. Engages Rev Thrust on Landing
17. Ground Proximity Warning System (GPWS)
18. Over Speed Warning
19. Stall Warning
20. Bank Angle Warning
21. Vref monitoring
22. Set AutoBrakes
23. Loads Fuel/Payload
24. Random Payload/Pax generator
25. Plus much more!
Share checklist and report bugs here: http://flightsimaddons.proboards.com/index.cgi#general
| Filename: | fsfovv2.zip |
| License: | Freeware, limited distribution |
| Added: | 21st December 2013, 21:58:46 |
| Downloads: | 3,215 |
| Author: | Matthew King |
| Size: | 60.63 MB |
| Category: Flight Simulator X - Utilities | |
| Flight Simulator First Officer (FSFO) |
|
Images related to this file:
File Description:
Flight Simulator First Officer is a generic virtual copilot that can be used with any aircraft. The primary function of FSFO is to assist the Pilot In Command (PIC) to fly the aircraft safely while adhering to Standard Operating Procedures (SOPs). This is accomplished via virtual checklist and sharing of cockpit duties/responsibilities. Specifically, the First Officer reads the following configurable checklist:
Before Start,
After Start,
Before Takeoff,
In-Range,
After Landing and
Shutdown.
After reading the checklist items, the Copilot will wait to ensure you (i.e. the pilot) have configured the aircraft correctly before proceeding to the next item. Also, the Virtual copilot is capable of performing the following actions:
Call Vspeeds based on your input,
Raise the Landing Gear on Takeoff,
Retract the Flaps,
Manage the taxi/landing lights,
Land the Aircraft,
Tune the ILS frequencies,
Call Climb Power based on your input,
Reset Vertical Speed when the Aircraft is within 1000 ft of the programmed altitude,
IAS warning (e.g. Aircraft is above 250 IAS while below 10000 ft),
GS Warnings (e.g. Aircraft is above 25 knots while taxing),
Resets the altimeter to standards when passing TA,
Engage Heading Hold on Takeoff,
Engage Altitude Hold on Takeoff,
Reset Speed on Takeoff,
Engage Speed Hold on Takeoff,
Engages Rev Thrust on Landing,
Ground Proximity Warning System (GPWS) and
much more...
visit us at http://www.flightsimfirstofficer.com/
| Filename: | fsfo.zip |
| License: | Freeware, limited distribution |
| Added: | 15th September 2012, 16:58:12 |
| Downloads: | 5,149 |
| Author: | Matthew King |
| Size: | 49.1 MB |
| Category: Flight Simulator X - Utilities | |
| Flight Simulator First Officer V2.2 |
|
Images related to this file:
File Description:
Flight Simulator First Officer is a generic virtual copilot for FSX and FS9. The primary function of FSFO is to assist the Pilot In Command (PIC) to fly the aircraft safely while adhering to Standard Operating Procedures (SOPs). This is accomplished via virtual checklist and sharing of cockpit duties/responsibilities. Specifically, the First Officer reads the following configurable checklist: Before Start, After Start, Before Takeoff, In-Range, After Landing and Shutdown. After reading the checklist items, the Copilot will wait to ensure you (i.e. the pilot) have configured the aircraft correctly before proceeding to the next item. Also, the Virtual copilot is capable of performing the following actions: Call Vspeeds based on your input, Raise the Landing Gear on Takeoff, Retract the Flaps, Manage the taxi/landing lights, Land the Aircraft, Tune the ILS frequencies, Call Climb Power based on your input, Reset Vertical Speed when the Aircraft is within 1000 ft of the programmed altitude, IAS warning (e.g. Aircraft is above 250 IAS while below 10000 ft), GS Warnings (e.g. Aircraft is above 25 knots while taxing), Resets the altimeter to standards when passing TA, Engage Heading Hold on Takeoff, Engage Altitude Hold on Takeoff, Reset Speed on Takeoff, Engage Speed Hold on Takeoff, Engages Rev Thrust on Landing, Ground Proximity Warning System (GPWS) and much more...
View the change log to view what's new with V2.2: http://flightsimaddons.proboards.com/thread/32/change-log-updated-july-2014
This is a complete installer; you DO NOT need FSFO V2.*. If upgrading from 2.*, please read the attached readme.txt file for instructions
| Filename: | fsfov2_2.zip |
| License: | Freeware, limited distribution |
| Added: | 12th July 2014, 08:19:29 |
| Downloads: | 2,321 |
| Author: | Matthew King |
| Size: | 67.18 MB |
| Category: Flight Simulator X - Utilities | |
| FS2004/FSX Flight Analyzer, Logbook Utility V4.09 |
|
Images related to this file:
File Description:
FS2004/FSX Flight Analyzer Utility V4.09
Flight Data Recorder - Logbook.
NOW WITH STATISTICS TOP 5 AIRPORTS, CITIES AND COUNTRIES.
Very easy to use, just make a flight plan in the simulator or in this utility.
What this program do:
- quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc.
- start a failure sytem, such as gear, flaps, engine, etc.
- freeze the time, so you can fly in a for everlasting sunset.
- runway detecting system to see wich runways are in use.
- flight analyzing/data recording from departure to parking at the gate.
- When flight analysis is finished you can print a report, the report is automaticly saved as pdf File.
- graphical landingchart.
- record all your flights
- quickly look to your FSX display settings (only FSX) and change them even before the flight simulator is running.
- After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.
Flight analysis start recording at the moment when you begin taxiing.
It gives you huge information such as:
- takeoff- and landing-weight.
- takeoff- and landing-roll in m. and ft.
- separate fuel consumption in taxi, climb, cruise and descent.
- maximum banking in flight.
- which speed you using the flaps and gear.
- when autopilot on or off.
- vertical speed on touchdown.
- reverser set after landing.
- wich speed you cancel reverser.
- bouncing at landing.
- graphical landingchart.
- and lots of more.
You can better look the example of the pdf document located in the 'Flight Reports' folder.
Logbook records:
- fuel consumption.
- payload.
- distance.
- number of different airports.
- flight hours.
- landings.
- flaps.
- speed.
- and lots of more.
- quickly show touchdown wind information in a picture.
- quickly show the graphical landing chart.
- Now with statistics: top 5 Countries, Cities and Airports
Requirements:
Computer with vista or higher and internet access.
Microsoft .net framework 4.6 or higher.(free download on microsft.com)
Flightsimulator FSX or 2004 and FSUIPC installed.
Note: requires paid activation for full use.
Register and you have 1 month free.
Program fully works without registration at airport Athens and Iraklion (Greece)
| Filename: | fsqc409.zip |
| License: | Shareware, time limited |
| Added: | 3rd March 2019, 00:20:37 |
| Downloads: | 245 |
| Author: | Evander Tholen |
| Size: | 3.35 MB |
| Category: Flight Simulator X - Utilities | |
| FSX Log book editor 0.2 |
|
File Description:
This is an editor for FSX log book files. It can modify flight times, destination or landing airports and comments recorded for each flight in the logbook. You can export your logbook to CSV (Microsoft Excel) or HTML. It can also import the contents of your FS9 logbook.
This release adds new import/export features and a new gui to edit more informations contained in the logbook.
Requires Java Runtime Environment.
| Filename: | logbookedit-0411062225.zip |
| License: | Freeware |
| Added: | 6th November 2006, 16:37:29 |
| Downloads: | 6,536 |
| Author: | Lamont Clark (lc0277) |
| Size: | 85 KB |
| Category: Flight Simulator X - Utilities | |
| FsBTV |
|
Images related to this file:
File Description:
FsBTV implements Brake to Vacate system of modern Airbus aircrafts such as A380 and A350.
Select landing airport, runway, and taxiway to vacate, then FsBTV automatically controls brakes to get right position and speed.
It's much better than conventional autobrake system for pilot's convenience, passenger comfort, runway occupancy time, brake wear, and so on.
To watch video demo, please refer to "https://youtu.be/uh6MN_LTJZQ".
It works for any aircraft in FSX/P3D.
| Filename: | fsbtv10.zip |
| License: | Freeware |
| Added: | 4th February 2018, 05:49:17 |
| Downloads: | 613 |
| Author: | Dongjin Shin |
| Size: | 6.58 MB |
| Category: Flight Simulator X - Utilities | |
| AI Spotter 1.0 Full Setup |
|
Images related to this file:
File Description:
The FSX AI Spotter Project come from the passion to observe aircrafts departing and landing at one airport and the wishes to see live traffic just in the moment we are there. Internet is big. Some real time traffic provider are on the Web.
Why not create a program that integrates those datas with FSX ? Why leave a passionate AI spotter to create his/her scheduling flight using a simple way ?
FSXAIS is the answer to the above question. Requires Microsoft SimConnect.dll (1.0.61242 or early) and P.Dowson FSUIPC.dll for FSX (4.5 or early)
| Filename: | fsxais10.zip |
| License: | Shareware, limited functionality |
| Added: | 28th August 2011, 18:01:01 |
| Downloads: | 1,721 |
| Author: | Vincenzo Mercolino |
| Size: | 2.23 MB |
| Category: Flight Simulator X - Utilities | |
| NumberPad Control Move Aircraft Utility |
|
File Description:
NpCmoveAircraft is a Lua script in the Numberpad Control family of FSX scripts that can be used to move an aircraft to a new position. Each step includes prompts for the required input and format. User inputs include the DISTANCE to move (NMs), the DIRECTION to move (degrees magnetic), the desired aircraft ALTITUDE (ft), the desired aircraft HEADING (degrees magnetic), and the desired aircraft IAS (Kts) along with the LANDING GEAR POSITION -- up (u), down (d) or fixed (f). Or for any of the five inputs the user can simply enter a carriage return (Enter key) to signify NO CHANGE for that particular entry.
Prior to the move the aircraft can be on the ground or in the air. So, for example, NpCmoveAircraft can be used to simply turn an a/c around, to move it to the other end of a runway, to re-position it for another approach after landing, to jump ahead in cruise, to catch up to another a/c, etc. NpCmoveAircraft works with default FSX aircraft and many add-on aircraft that adhere to the standard FSUIPC offsets.
A registered copy of FSUIPC is required to execute the NpCmoveAircraft Lua script. Simply copy the script to the Modules folder of FSX and assign a ‘hot key’, button or switch to activate the script.
Al Klayton
[email protected]
| Filename: | npcmoveaircraft.zip |
| License: | Freeware |
| Added: | 21st February 2017, 21:30:01 |
| Downloads: | 146 |
| Author: | Al Klayton |
| Size: | 4 KB |
| Category: Flight Simulator X - Utilities | |
| FS2004/FSX Flight Analyzer Utility V2.04 |
|
Images related to this file:
File Description:
NOW ALSO WORKING WITH FS2004
What this program do:
- quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc.
- start a failure sytem, such as gear, flaps, engine, etc.
- freeze the time, so you can fly in a for everlasting sunset.
- runway detecting system to see wich runways are in use.
- a flight analysis system, this is automaticly started when you start FsQC.
- When flight analysis is finished you can print a report, the report is automaticly saved as pdf File.
- flight analysis is finished when you parked your aicraft with the parking brakes set for more then 5 seconds.
- graphical landingchart.
- load a existing flight or flightplan.
- quickly look to your CFG (settings) files (only FSX) and change them even before the flight simulator is running.
- After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.
- for properly working, flight analysis require a fsx/fs2004 flightplan.
Flight analysis:
Flight analysis start recording at the moment when you begin taxiing.
It gives you huge information such as:
- takeoff- and landing-weight
- takeoff roll in m. or ft.
- separate fuel consumption in taxi, climb, cruise and descent.
- maximum banking in flight
- which speed you using the flaps and gear
- when autopilot on or off
- vertical speed on touchdown
- reverser set after landing
- wich speed you cancel reverser
- bouncing at landing
- graphical landingchart.
- and lots of more
You can better look the example of the pdf document located in the 'Flight Reports' folder.
Failures:
In the settings menu you can select the kind of failures you want to occur and when they must occur.
At this moment 10 failures are possible:
-altitude
-attitude
-heading
-airspeed
-vertical speed
-pitot
-fuelleak
-flaps
-engine
-gear
Recommended:
For more easy use, run this program on a second monitor or much better on a second computer(laptop) where FSUIPC-client is running in the same network where FSX/FS2000 is running and FSUIPC WideFs is registered.
See also the pdf Manual.
Also look at www.FsQC.eu for more information.
If you have a problem look first on www.fsqc.eu/faq.html
If you have questions please contact [email protected]
| Filename: | fsqc204.zip |
| License: | Check within download |
| Added: | 5th March 2018, 22:40:20 |
| Downloads: | 329 |
| Author: | Evander Tholen |
| Size: | 2.45 MB |
© 2001-2025 AVSIM Online
All Rights Reserved