Category: Flight Simulator X - AFCAD Files
Mount Pleasant Landing Strip Airport (67NJ), NJ

File Description:
Located 01 miles S of Hainesburg, New Jersey on 192 acres of land, Mount Pleasant Landing Strip Airport is a private turf field. The strip itself is 2100 feet in length over fairly level ground. There is no hard-surfaced grass runway in place, so setting your mesh to the highest resolution is recommended as you will be landing on bare terrain. Next to Runway 06 is a path through the trees you can taxi along to get to a hangar - although it is not available for transient aircraft and is closed. Collision with the trees along the path near the hangar and the static aircraft parked near it is disabled to make it easier to move through this relatively tight area. Immediately beyond the hangar is a clearing with ample room to turn around to taxi back out. You can also start parked in front of the hangar. The windsock is located a few feet west of the hangar and is not lit. The runway also has no edge lighting so daytime VFR operations only are recommended for this airfield. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Mount_Pleasant_Landing_Strip_Airport_67NJ_NJ.zip
License:	Freeware
Added:	7th February 2011, 23:49:26
Downloads:	198
Author:	Drew Sikora
Size:	468.64 KB

Category: Flight Simulator X - AFCAD Files
Reno/Tahoe Intl v2 - KRNO - Nevada, Acceleration Required

File Description:
This airport update was designed with the latest version of ADE (Airport Design Editor) and made only for those that have Acceleration installed: one file with the Crosswind runway operating where all 3 runway's will be used for takeoff/landing and one file as the default runway operation: new control tower in its new location, assigned parking with extra parking, taxiways and taxi signs updated, extra fuel trucks, support vehicle roads rebuilt and many other improvements, airport views are from inside the control tower (when in tower view) please view the readme before installation

Filename:	RenoTahoe_Intl_v2__KRNO__Nevada_Acceleration_Requi.zip
License:	Freeware
Added:	5th May 2011, 04:06:20
Downloads:	2,328
Author:	Ray Smith
Size:	34.66 KB

Category: Flight Simulator X - AFCAD Files
Wide Sky Airpark Airport (JY31), NJ

File Description:
Located 03 miles NW of Bridgeton, New Jersey on 23 acres of land, Wide Sky Airpark Airport is a private turf field 2550' in length. There is no fuel available, but there is tiedown space by the main hangar in the middle of the field to the west. You can start in the parking spot there if you have a plane with 40' or less wingspan (collision with static aircraft is disabled so you can put a bigger plane there if you wish with no trouble). The windsock is not lit at night and is located atop the south end of then main hangar's roof. The field is hedged in to the east with bushes but they do not cause aircraft collisions. The runway is lit for night VFR operations. There is no hard surfaced runway so set your terrain mesh settings as high as possible to enjoy rolling around on bare bumpy terrain.

Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Wide_Sky_Airpark_Airport_JY31_NJ.zip
License:	Freeware
Added:	10th May 2011, 13:40:36
Downloads:	157
Author:	Drew Sikora
Size:	1.27 MB

Category: Flight Simulator X - AFCAD Files
Woodcrest Farms Airstrip Airport (JY17), NJ

File Description:
Located 02 miles NE of Shiloh, New Jersey, Woodcrest Farms Airstrip Airport is a private turf field 2303' in length. There are no services offered for transient aircraft and the field is not lit, so daytime VFR operations only are recommended. There is no hard-surfaced runway so make sure your terrain mesh is set as high as possible. You can start on the runway or parked next to the hangar east of the field Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Woodcrest_Farms_Airstrip_Airport_JY17_NJ.zip
License:	Freeware
Added:	11th May 2011, 03:29:54
Downloads:	170
Author:	Drew Sikora
Size:	443.09 KB

Category: Flight Simulator X - AFCAD Files
Rainbow's End Airport (JY39), NJ

File Description:
Located 07 miles S of Salem, New Jersey on 20 acres of land, Rainbow's End Airport is a private turf strip 2200' in length. There are no services for transient aircraft and the airport is not lit at night, so daytime VFR operations only are recommended. If you have an aircraft with 40' or less of wingspan you can start at one of the parking spaces east or west of the runway by the hangars. Otherwise it is suggested you start on the runway. There is no hard surfaced runway so set your terrain mesh as high as possible. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005 & New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Rainbows_End_Airport_JY39_NJ.zip
License:	Freeware
Added:	12th May 2011, 00:58:29
Downloads:	173
Author:	Drew Sikora
Size:	626.46 KB

Category: Flight Simulator X - AFCAD Files
Hackettstown Airport (N05), NJ

File Description:
Located 03 miles SW of Hackettstown, New Jersey on 65 acres of land, Hackettstown Airport is a public asphalt strip 2200' in length. Fuel, tiedowns and hangars are all available for transient aircraft. For fuel, stop on the concrete pad next to the fuel tank northeast of the runway - 100LL only. Tiedowns are available both east and west of the runway - note that west parking faces the trees and if you start in one of the West Parking spots you will either need to pushback or slew to give yourself room to turn out - static aircraft collisions are off but vegetation is not. The one hangar north of the airport is open for parking, you can start there with the DOCK type parking location. This airport is not lit so daytime VFR operations only are recommended. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Hackettstown_Airport_N05_NJ.zip
License:	Freeware
Added:	13th May 2011, 09:16:30
Downloads:	208
Author:	Drew Sikora
Size:	557.98 KB

Category: Flight Simulator X - AFCAD Files
Fly-N-D Landing Strip Airport (92NJ), NJ

File Description:
Located 01 miles E of Kingwood Township, New Jersey on 121 acres of land, Fly-N-D Landing Strip Airport is a private turf field with a 2200' runway. There is no hard surface runway so setting your mesh as high as possible will lead to the best effects of landing on terrain. No transient storage or services are offered, and the airfield is not lit, so daytime VFR operations are recommended only.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.

This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	FlyND_Landing_Strip_Airport_92NJ_NJ.zip
License:	Freeware
Added:	23rd March 2011, 13:33:27
Downloads:	174
Author:	Drew Sikora
Size:	474.94 KB

Category: Flight Simulator X - AFCAD Files
Winchelsea Airport (8NJ0), NJ

File Description:
Located 01 miles W of Port Republic, New Jersey, Winchelsea Airport is a private turf strip. Pay very, very close attention to the published length of this grass runway: 980'. This is in addition to 50ft tree obstacles at either end of the runway. Double-check your aircraft's takeoff and landing distances before visiting this airfield!! A strong headwind is suggested for operations out of this location. Also take note the traffic patterns vary for each runway. There are no transient services offered and the airport is not lit at night so daytime VFR use only is suggested. There is no hard surface runway so set your terrain mesh slider as high as you can for the best effect of landing on terrain.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.

This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Winchelsea_Airport_8NJ0_NJ.zip
License:	Freeware
Added:	24th March 2011, 19:28:46
Downloads:	162
Author:	Drew Sikora
Size:	396.23 KB

Category: Flight Simulator X - AFCAD Files
Northwest Arkansas Regional Airport - KXNA

File Description:
Small update!! Completely rebuilt Northwest Arkansas Regional Airport, new terminal, new temporary alternate runway, more parking spaces and surrounding roads around airport. Please see Readme! ENJOY!!!

Filename:	Northwest_Arkansas_Regional_Airport__KXNA.zip
License:	Freeware
Added:	25th March 2011, 02:06:13
Downloads:	413
Author:	Gilbert Bowers
Size:	21.94 KB

Category: Flight Simulator X - AFCAD Files
Southern Cross Airport (C01), NJ

File Description:
Located 03 miles SW of Williamstown, New Jersey on 18 acres of land, Southern Cross is a public turf airstrip with an ample 2400' runway. The runway is hard surfaced in order to allow for AI traffic to use this airport, however the end user must enable flights to arrive/depart from this airfield within their AI traffic program in order for AI to appear here. Tie down space is available north of Runway 09 and fuel is available at the tank next to the hangar. This airport is not lit at night so daytime VFR operations only are recommended. In addition to trees at the ends of both runways, power lines are strung up across there too. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Southern_Cross_Airport_C01_NJ.zip
License:	Freeware
Added:	25th March 2011, 16:38:00
Downloads:	192
Author:	Drew Sikora
Size:	630.77 KB