Category: Flight Simulator X - AFCAD Files
Spitfire Aerodrome Airport (7N7), NJ

File Description:
Located 02 miles S of Pedricktown, New Jersey on 48 acres of land, Spitfire Aerodrome Airport is a public asphalt single-strip field that allows transient craft to tie down on the apron. There are also helicopters based here on this field (note there is no Jet-A fuel available) so the helicopter start location will place you on the ramp.

Although this airport has a beacon, FSX for some reason does not include one with the stock airport file and I can't yet create rotating beacons so it is there and lit at night but does not rotate and is not as visible as the rotating ones. This will be addressed in a later update. Also take note of the layout of this airport, it requires that AI traffic cross the runway in order to taxi to either end for take off. AI aircraft DO NOT hold short when taxiing across runways (this is an FSX limitation), so use extreme caution on approach and departure to avoid any unfortunate runway incursions. Aircraft can fuel up by parking near the fuel truck beside the hangar south of the runway. If you have trouble locating the windsock, look on top of the hangar roof north of the runway. The crashed aircraft in the pond is fictional, there is a distinctive airplane-shaped object there in the satellite textures but I could not determine what this might be from aerial photos so I just crashed a plane there for kicks :)

Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Spitfire_Aerodrome_Airport_7N7_NJ.zip
License:	Freeware
Added:	11th February 2011, 15:29:36
Downloads:	241
Author:	Drew Sikora
Size:	833.54 KB

Category: Flight Simulator X - AFCAD Files
Stoe Creek Farm Airport (7NJ2), NJ

File Description:
Located 01 miles S of Canton, New Jersey, Stoe Creek Farm is a private turf field 1725' in length. The runway is largely clear of obstructions although on approach for Runway 05 you will deal with 20-30' trees a few hundred feet back from the threshold and there are transmission towers along the approach corridor to Runway 23 you should watch out for. The runway does have edge lighting, although the windsock is not lit at night and daytime VFR is still recommended. There are no services for transient craft at this airfield. Since you will be landing on terrain, it is recommended that your mesh complexity is set as high as possible. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Stoe_Creek_Farm_Airport_7NJ2_NJ.zip
License:	Freeware
Added:	14th February 2011, 18:32:24
Downloads:	163
Author:	Drew Sikora
Size:	700.91 KB

Category: Flight Simulator X - AFCAD Files
Coombs Airport (7NJ7), NJ

File Description:
Located 04 miles NE of Elmer, New Jersey, Coombs Airport is a private turf field 2000' in length wilth clear 20:1 approach and departure at each end of the runway. You'll find some surrounding buildings but they are all located several hundred yards from the runway. This is a good strip to keep in mind for emergencies if you're in the area. You will be landing on terrain so having your mesh complexity set as high as possible is recommended. This airport is not lit at night, daytime VFR operations only are suggested. There are no transient services offered. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Coombs_Airport_7NJ7_NJ.zip
License:	Freeware
Added:	16th February 2011, 00:03:55
Downloads:	191
Author:	Drew Sikora
Size:	756.22 KB

Category: Flight Simulator X - AFCAD Files
Dave's Aerodrome Airport (7NJ9), NJ

File Description:
Located 01 miles SW of Cedarville, New Jersey on 43 acres of land, Dave's Aerodrome Airport is a private turf field 2000' with a 600' displaced threshold on Runway 12. Each runway has a clear 20:1 approach slope, but in the case of Runway 12 be sure to aim for a landing past the hangar! There are power lines running along the road at the runway threshold that are not just there for decoration - come in too low and FSX will register a crash. In real life they have red balls on them - unfortunately I have no way of adding those in the sim at this time. So be on the lookout while on approach. Also take note that it is a right pattern for Runway 12 and a left pattern for Runway 30. The windsock is located next to the hangar and is not lit. There are no lights at this airport so daytime VFR operations only are suggested. No services are offered for transient aircraft. There is no hard-surfaced runway, you will be landing on bare terrain so set your mesh complexity slider as high as it will go for the best effect. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Daves_Aerodrome_Airport_7NJ9_NJ.zip
License:	Freeware
Added:	16th February 2011, 15:36:42
Downloads:	211
Author:	Drew Sikora
Size:	1.02 MB

Category: Flight Simulator X - AFCAD Files
Strawberry Fields Airport (89NJ), NJ

File Description:
Located 02 miles N of Mays Landing, New Jersey on 220 acres of land, Strawberry Fields Airport is a private turf/sand strip. SkyVector lists the runway as 2200' long, but as measured during development it is closer to 3000'. In addition to Runways 14 and 32, there is a second runway that is not listed in the airport directory and presumed closed. However if you need it in an emergency the numbers are 03 and 21 (no starts are available for these runways). This airport is not lit and is best used only during daytime VFR conditions. The windsock can be found at the intersection of the two runways and is also not lit. You will be landing on bare terrain so have your mesh complexity slider set as high as possible for best effect. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Strawberry_Fields_Airport_89NJ_NJ.zip
License:	Freeware
Added:	17th February 2011, 07:55:52
Downloads:	204
Author:	Drew Sikora
Size:	1.75 MB

Category: Flight Simulator X - AFCAD Files
SPZO Alejandro Velasco Astete International Airport

File Description:
SPZO Alejandro Velasco Astete International Airport (IATA: CUZ, ICAO: SPZO) is located in the city of Cusco, in southeastern Peru. Cusco, a principal tourist attraction in Latin America, receives various domestic flights as well as some international flights. Its runways are completely paved. Currently, it operates at limited capacity due to its precarious location near the city's center. Despite these limitations, the airport has consistently ranked as Peru's second most important airport terminal, handling 1,288,200 national and international passengers in 2009, as reported by CORPAC. The runways were resized the gates placed on correct location and number. The other two files (SPMA) are from Machu Picchu a heliport at the gate of the ruins.

Filename:	SPZO_Alejandro_Velasco_Astete_International_Airpor.zip
License:	Freeware
Added:	20th February 2011, 01:20:41
Downloads:	739
Author:	Anwar Gonzalez
Size:	15.78 KB

Category: Flight Simulator X - AFCAD Files
Correction of Taxiway signs for Aerosoft's Mega Airport Frankfurt (EDDF) according to new ground layout 2010

Images related to this file:

File Description: In 2010 Fraport introduced alphanumerical taxiway designators for EDDF. Hence almost all taxiway signs needed to be modified. Unfortunately the present Aerosoft scenery does not reflect this change. The BGL included allows you to update your MAF scenery to the current state. This addon of course does not contain the Aerosoft scenery itself!

Filename:	Correction_of_Taxiway_signs_for_Aerosofts_Mega_Air.zip
License:	Freeware
Added:	26th February 2011, 22:34:21
Downloads:	1,307
Author:	Michael Henseler
Size:	8.88 KB

Category: Flight Simulator X - AFCAD Files
HECA - Cairo International, Egypt - Major Update

Images related to this file:

File Description: This is part of the eleventh round of airports issued by Alpha India Group. AIG Ground creates high quality Afcads for both FS2004 and for FSX default and Add On Scenery airports. Our airports are created drawing on the best available resources and aim to simulate the real world airport as closely as possible but also to ensure good levels of traffic with realistic parking and good flow of traffic around the airport. Please read and follow installation instructions in the Readme file carefully, as these do vary. Visit us at www.alpha-india.net for more information.

Filename:	HECA__Cairo_International_Egypt__Major_Update.zip
License:	Freeware
Added:	27th February 2011, 00:17:10
Downloads:	5,221
Author:	Matthew Brooks & Alpha India Group
Size:	1.07 MB

Category: Flight Simulator X - AFCAD Files
Henri Coanda Airport - LROP - Bucharest, Romania

File Description:
This airport update was designed with the latest version of ADE (Airport Design Editor) and made only for the FSX default airport: The Terminal rebuilt which includes the new Terminal extension now with 18 Gates all with animated jetways, assigned parking with extra parking, Taxiways and Taxi signs updated, extra fuel trucks, support vehicle roads rebuilt and many other improvements, airport views are from the roof of the control tower (when in tower view) please view the readme before installation

Filename:	Henri_Coanda_Airport__LROP__Bucharest_Romania.zip
License:	Freeware
Added:	3rd March 2011, 02:58:25
Downloads:	5,642
Author:	Ray Smith
Size:	23.15 KB

Category: Flight Simulator X - AFCAD Files
Lijiang Airport ZPLJ, Yunnan province China.

File Description:
Lijiang Airport ZPLJ, Yunnan province China. Afcad prepared using ADE9X.This airport is one of many in China that do not exist in FSX. Afcad prepared from Google image and used generic objects which only approximate the actual terminal etc. The comms frequencies are arbitary, not actual. The author has prepared afcads also for Dali ZPDL, and Daqing ZPDQ also in Yunnan province.

Filename:	Lijiang_Airport_ZPLJ_Yunnan_province_China.zip
License:	Freeware
Added:	11th March 2011, 06:49:00
Downloads:	674
Author:	Peter R Kennedy
Size:	5.04 KB