Where Flight Simulation Enthusiasts Gather from Around the World!
| Category: Flight Simulator X - Scenery | |
| CYFB - Iqaluit Airport - Nunavut, Canada |
|
Images related to this file:
File Description:
Iqaluit is the capital of Nunavut, a vast northern region that covers almost all of the Canadian North. The airport is of critical importance to the community, especially when ice makes boat travel impossible.
The scenery includes all airport buildings with custom designed and generic buildings nearby. Several typical airlines are represented, both by their flights by their facilities, including First Air, Canadian North, Air Greenland, Ken Borek Air and Keewatin. The Airbus A380 was in Iqaluit in February 2006 for flight testing in cold weather, as do other manufacturers. Airbus will also carry out the same tests for its new A350.
CYFB is also a Canadian Force base. Several units are parked in the military area, in addition to the C- 177 and his escort on ramp 2. A Twin Otter from the RCMP, and some general aviation aircrafts complement the fleet. Six ships are in the scenery: four static and two mobile (AI). Zodiacs and a balloon tourist flow into the bay. These, and the ships AI, start their movements 1100Z. The weather station launches a weather balloon regularly. Three small caribou herds are in the vicinity.
| Filename: | CYFB__Iqaluit_Airport__Nunavut_Canada.zip |
| License: | Freeware, limited distribution |
| Added: | 5th April 2014, 14:37:23 |
| Downloads: | 3,969 |
| Author: | Jean-Pierre Fillion, Pierre Gallant |
| Size: | 16.88 MB |
| Category: Flight Simulator X - Missions | |
| Hurricane Landing |
|
Images related to this file:
File Description:
What looked like a routine job is slowly evolving into a nightmare. Flight LH044 from Munich to Hamburg with you as co-pilot is already two hours behind schedule and hurricane Emma is building up power.
The mission begins with your Airbus A320-200 with 131 passengers on board parked at the gate with the engines running. To grant you some "special weather" experience, your captain has decided that he will care for ATC, but you'll handle all aircraft systems. Good luck... By Robin Hutter.
| Filename: | Hurricane_Landing.zip |
| License: | Freeware |
| Added: | 29th April 2010, 13:02:46 |
| Downloads: | 6,136 |
| Author: | Robin Hutter |
| Size: | 13.43 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Cathay Pacific Airways Airbus A330-343X '100th aircraft' and '60th Anniversary' |
|
File Description:
The plane uses 32-bit texture with alpha layer to make some high reflections on the fuselage. With reference to the photos of LAD, I have tried to make an exact configurations and position of window, cargo doors, and hand-painted dirt. Cathay Pacific (B-LAD) is a type Airbus A330-343X. It was the 100th aircraft of Cathay Pacific delivered to Cathay Pacific on 30th August 2006, carrying the 60th Anniversary sticker of Cathay Pacific. Model - Project Opensky A330v2 Version 2004-8-3. Details - http://www.kaitak.tk/
| Filename: | Cathay_Pacific_Airways_Airbus_A330343X_100th_aircr.zip |
| License: | Freeware, limited distribution |
| Added: | 23rd June 2007, 20:40:44 |
| Downloads: | 5,277 |
| Author: | Charles Cheng, Project Opensky |
| Size: | 5.72 MB |
| Category: Flight Simulator X - Scenery | |
| LHSM-Balaton-FSX |
|
File Description:
well it starts as always, i can't find any usable freeware airport in this case for
the LHSM Balaton so I'll build it myself again...............
well what can i say here it is after a lot of work as real as possible with a lot of
details with the Default scenery built ..........
So fly to Lake Balaton with an Airbus A321 or a Boeing 737, of course
There you change to a heli or a smaller plane and see each other
on the premises at......
| Filename: | LHSMBalatonFSX.zip |
| License: | Freeware |
| Added: | 13th January 2023, 02:46:53 |
| Downloads: | 101 |
| Author: | Ewald Wagner |
| Size: | 99.97 MB |
| Category: Flight Simulator X - Scenery | |
| SKBQ Ernesto Cortissoz International Airport |
|
File Description:
SKBQ
Ernesto Cortissoz International Airport (Spanish: Aeropuerto Internacional Ernesto Cortissoz) (IATA: BAQ, ICAO: SKBQ) is located in the municipality of Soledad 12 km (7 mi) from Barranquilla,
the capital of the Atl�¡ntico department in Colombia. The airport owes its name to one of the pioneers of Colombian aviation, Ernesto Cortissoz.
This airport serves as the international hub for AIRES, and as a focus city for Avianca. It is capable of accepting widebodied aircraft such as the Boeing 747, Boeing 767, and Airbus A340.
| Filename: | SKBQ_Ernesto_Cortissoz_International_Airport.zip |
| License: | Freeware |
| Added: | 10th March 2011, 21:01:04 |
| Downloads: | 2,859 |
| Author: | Anwar Gonzalez |
| Size: | 40.19 KB |
| Category: Flight Simulator X - Panels | |
| Eurofighter Typhoon Panel |
|
Images related to this file:
File Description:
The panel has been developed for FSX Flight Simulator SP1 or SP2. It has also been tested with Microsoft Acceleration, but compatibility is not guaranteed by the author.
This panel has been designed according to a large number of technical documents, descriptions, and pictures out of the Internet. The design goal was to develop a panel and gauges as close as possible to the original aircraft. It was, however by far not possible to programming all the functions and displays, because of the complexity of the real Eurofighter panel, and also because of limitations in FSX.
However, I believe, that the panel with the MFD screen displays gives a good impression on how the real Eurofighter cockpit looks inside.The aircraft model, development by ALPHA/VIRTAVIA, has been used as the base for this panel development. The aim was to go with one model version only , the two seater air to air model. A number of parameter of the aircraft.cfg have been modified to achieve a best possible result of the flight dynamics for the model. It is up to the user to use any other model as this one, and use this panel for it.
For this package, panel and model, I decided to call it the X -Version which shall be seen as an experimental military test version, or if you like, a " Proof of Concept " version. So, you will see a neutral paint with just the Typhoon letters on the aircraft tail. This approach allows to go with deviations and differences to the current technical implementations for the cockpit displays and functions for the Eurofighter.
The panel includes gauges for the afterburner effects, sonic sound effect, callout sounds, weapon explosions effects, and a full functioning TCAS gauge (A future requirement for the Eurofighter), A2A fuel functions, target radar tracking functions and more. The panel has been developed for widescreen monitors only. No VC panel is part of this package.
This is not a load and fly package. Please take your time to read the included panel documentation carefully. Do not skip chapters because you may think, they are not important for you.
For copyrights and credits please look at the documentation for this panel.
| Filename: | Eurofighter_Typhoon_Panel.zip |
| License: | Freeware, limited distribution |
| Added: | 13th April 2016, 20:37:48 |
| Downloads: | 394 |
| Author: | Dietmar Loleit |
| Size: | 24.77 MB |
| Category: Flight Simulator X - Original Aircraft | |
| AN-22 Antheus Mastered |
|
Images related to this file:
File Description:
THIS IS MY FINAL AN-22 VERSION: Unveiled to the West in 1965, the Antonov An-22 was the world's largest aircraft, until the advent of the Lockheed C-5A Galaxy. Powered by 4 contra-rotating turboprops, the design remains the world's largest turboprop-powered airplane. The An-22 was originally built for the Soviet Air Force and Aeroflot, the state airline. A total of 68 aircraft were built during 1965-1975, from which 2 never flew, 19 have been preserved, and 33 removed from service. Currently only 7 are in service. Six of them are used by the Russian Air Force and one (UR-09307) belongs to Antonov Design Bureau, used for civil needs, and operates out of UKKM. The AN-22 is designed to carry heavy loads of 80 tonnes over a 3,000 nm range at high speed and moderate altitude. The civilian model is used for long and medium range flights with updated avionics and flight controls. The wing has a forward and rear sweep effect with a low taper ratio and moderate wing area for it's size. The tail includes twin vertical fins that help maintain stability. The engines are constant speed turboprops that include 2 four bladed contra-rotating props with auto-pitch, and this gives her a thrust rating of 15,211 shp and a fuel efficiency of .353 lb/hp/hr. The cargo area is 14 ft high and wide, and 108 ft long. All fuel is contained within the wings and in the upper fuselage (7 tanks). She has 12 wheels that carry most of the weight, and two steering wheels located behind the crew cabin. Cargo is loaded through the rear loading ramp. The cockpit is located high, as well as the crew quarters. Additional passengers (when present) are seated below the cockpit forward. Original Design and Textures by: Enrique Del Rosario; Sound by: Aaron R. Swindle; Panel by: Marco Spada; Auto Smoke Effects by Richard Wisman; Engine/Aero Dynamics, effects and data by: Douglas E. Trapp. Please Read the Readme AN22.txt file before operations.
| Filename: | AN22_Antheus_Mastered.zip |
| License: | Freeware |
| Added: | 19th August 2018, 01:44:48 |
| Downloads: | 1,292 |
| Author: | Douglas E. Trapp |
| Size: | 4.62 MB |
| Category: Flight Simulator X - Sounds | |
| Douglas DC-8-63 P&W JT3D-7 Sound Pack |
|
File Description:
SkyHigh Audio Simulations is proud to present what is quite possibly the most realistic sounding Pratt & Whitney JT3D-7 Turbofan sound pack available! This sound pack is designed to work with Historic Jetliners Group's Douglas DC-8-63 model. There are two versions of this sound pack, one interior point of view from the cockpit, and the other being the passenger cabin POV in front of the engines. This sound pack includes many unique and realistic features, including realistic 3D sound cones giving a very realistic exterior sound experience, especially in the fly-by view mode. Also using the cone technology, realistic distant taxi howling and distant rumbling sounds are included. The plane could be heard loud and clear from up to 2km away in tower view! Realistic start up sounds featuring external air cart compressor howling noises are included. Realistic interior ambience noises such as the inverter noise and touchdown, flaps, gear sound with chime, and more are featured in this sound pack. Please visit our website at: www.skyhighflightsim.webs.com for more info and sound packs!
| Filename: | Douglas_DC863_PW_JT3D7_Sound_Pack.zip |
| License: | Freeware |
| Added: | 3rd September 2011, 04:27:55 |
| Downloads: | 3,081 |
| Author: | Adam Murphy and Jesse Casserly - Skyhigh Audio Simulations |
| Size: | 43.51 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Douglas C-117D / Super DC-3 (N5739Y) - Fixes |
|
Images related to this file:
File Description:
FSX FIXES/IMPROVEMENTS for my previously released Douglas C-117D repaint
textures for privately owned red and white N5739Y (FSX_Douglas_C-117D_Private_Red-White_N5739Y.zip), for the freeware
Manfred Jahn and team Douglas C-117D (c117d_v1_beta.zip), which you must
have previously installed in FSX. Numerous adjustments to mismatched paint,
various anomolies, texture offsets, etc. in the wing leading edges, de-icer boots,
wingtips, glare shield (front vs.rear), starboard side problem between nose and
fuselage, space between inner and outer deicer boots, etc. Most were small and
hardly noticable, some were sticking out like a sore thumb and rather embarrassing
in hindsight (sorry). Belly pods repainted from gloss black to flat black (matching
the paint on the glare shield for better visual harmony). Gray rear tip of fuselage
located and painted red to match. Gray prop hubs painted for better visual appeal
and 'balance' with painted spinners. Antenna above cockpit repainted to match. And
alpha channels added for improved reflections. Very simple installation, just delete
the old texture folder and replace it with this new one. Repaint by Tom Tiedman.
| Filename: | Douglas_C117D__Super_DC3_N5739Y__Fixes.zip |
| License: | Freeware |
| Added: | 18th August 2013, 16:09:48 |
| Downloads: | 716 |
| Author: | M. Jahn and team / Tom Tiedman |
| Size: | 10.05 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| North American AT-6 Texan (N651SH) |
|
Images related to this file:
File Description:
This is a repaint for the freeware Warwick "Wozza" Carter AT-6G Texan. This repaint depicts the restored AT-6D Ser. 49-3305, N651SH, registered to Flying Texans and Mustangs Unlimited, LLC. This aircraft was originaly built during WWII for the USAAF, but was completely rebuilt by North American in 1949 for the newly formed USAF. In 1962, the aircraft was once again overhauled and exported to Spain, where it served until the early 1980's. Today this aircraft is operated by an organization called Texan Flight, based in Houston, Texas, which provides flight experiences to paying customers. The aircraft remains painted in the markings it wore while serving as part of the Spanish AF, keeping this part of its heritage intact. The aircraft has been nicknamed "Dulcinea" by its owners, a character from the tale of Don Quixote. This repaint includes all new exterior textures (including specular and bump maps), new engine and modified wheel well textures, and new and modified cockpit textures throughout. This repaint requires the files t6texmod.zip and fsds_t-6update.zip to be installed first.
| Filename: | North_American_AT6_Texan_N651SH.zip |
| License: | Freeware |
| Added: | 27th June 2013, 16:57:03 |
| Downloads: | 262 |
| Author: | John Terrell |
| Size: | 9.86 MB |