Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - AFCAD Files | |
| Vliet Airport (6NJ1), NJ |
|
File Description:
Located 02 miles SE of Washington, New Jersey, Vliet Airport is a private turf field. Trees border the runway on three sides, and a dirt mound and semi-truck are also obstacles to watch out for at the end of Runway 06 if you land long. At 1300' feet, it is a very short runway so make sure you check the capabilities of your aircraft before attempting to either land or take off here! Don't forget that in order to clear trees, usable runway space is closer to only 1000'. This airport has no lighting so daytime VFR operations only are recommended. Take note that there is also no wind sock, so be sure you are aware of the weather conditions prior to arriving/departing. There is also no hard-surfaced runway and you will be landing on terrain so it's suggested you have your mesh resolution slider as high as possible.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Vliet_Airport_6NJ1_NJ.zip |
| License: | Freeware |
| Added: | 8th February 2011, 23:20:47 |
| Downloads: | 182 |
| Author: | Drew Sikora |
| Size: | 375.28 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Wide Sky Airpark Airport (JY31), NJ |
|
File Description:
Located 03 miles NW of Bridgeton, New Jersey on 23 acres of land, Wide Sky Airpark Airport is a private turf field 2550' in length. There is no fuel available, but there is tiedown space by the main hangar in the middle of the field to the west. You can start in the parking spot there if you have a plane with 40' or less wingspan (collision with static aircraft is disabled so you can put a bigger plane there if you wish with no trouble). The windsock is not lit at night and is located atop the south end of then main hangar's roof. The field is hedged in to the east with bushes but they do not cause aircraft collisions. The runway is lit for night VFR operations. There is no hard surfaced runway so set your terrain mesh settings as high as possible to enjoy rolling around on bare bumpy terrain.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Wide_Sky_Airpark_Airport_JY31_NJ.zip |
| License: | Freeware |
| Added: | 10th May 2011, 13:40:36 |
| Downloads: | 157 |
| Author: | Drew Sikora |
| Size: | 1.27 MB |
| Category: Flight Simulator X - Scenery | |
| Columbia SC (KCAE) |
|
Images related to this file:
File Description:
The Columbia Metropolitan Airport Authority has provided substantial information about KCAE online, making it possible to pretty accurately model this airport. The taxiway signs have been placed according to exhibits in the airport's certification manual, and taxiway designations have been revised in accordance with upgrades to be effective mid-Novemer 2012. Most buildings have been custom modeled in accordance with information available on the internet, including Microsoft Bing birdseye views. The airport layout and landclass changes are in accordance with Google Earth imagery.
If you have Jim Dhaenens' lightobj.bgl installed, apron lighting will be included, and if you have
KB_static_aircraft_FSX installed (available at www.kb-sim.com/screens_static_aircraft.html),
additional parked aircraft will be visible. The layout of scenery is optimized for use with
Ultimate Terrain X-USA. FSX runs smoothly with this scenery on my computer, but it has not been
tested on a low-end system. Sometime after starting this project, it came to my attention that a
good scenery for KCAE was already available (but not listed at www.freewarescenery.com) from Jim
Hill that is another option as well as adjusting scenery complexity.
The new taxiway designations are not yet shown in the latest observed FAA airport diagram. An airfield sketch provided to pilots by the Columbia Metropolitan Airport is included in the package to show the taxiway designation changes.
| Filename: | Columbia_SC_KCAE.zip |
| License: | Freeware |
| Added: | 14th December 2012, 01:28:23 |
| Downloads: | 1,695 |
| Author: | Art Poole |
| Size: | 3.43 MB |
| Category: Flight Simulator X - Scenery | |
| Deshi Sceneries - Deshi Dhaka (VGHS/VGZR) Shahjalal/Zia International Airport, Dhaka, Bangladesh |
|
Images related to this file:
File Description:
This is the first and only full freeware scenery released for VGHS/VGZR Dhaka, Bangladesh. This has been a work in progress since 2012, and in 2016 we decided to make it public beta for the Bangladeshi Flight Sim Community. The team wasn't able to work further on this and the project was taken over by another developer who worked alongside our team. After years of hard work, we finally were able to collaborate with Final Approach Design Simulations, and released the full and final version of this scenery for P3D V4-5, in the simMarket as payware. While the FSX version was untouched and not upgraded further, we wanted to publish it online as a freeware scenery and NO MORE A BETA TEST. We hereby have uploaded the scenery, and according to our EULA, we are HEREBY changing the clause that states it is only to be used by Bangladeshi and that it is a limited release. We HEREBY declare it a full release for FSX, and we are allowing all nationalities to use our software. We hope you enjoy this free release and if you are a P3D V4-5 user, go check out our final product in the simMarket under the title "HAZRAT SHAHJALAL DHAKA VGHS DAC P3D4-5" by "Final Approach Design Simulations".
| Filename: | Deshi_Sceneries__Deshi_Dhaka_VGHSVGZR_ShahjalalZia.zip |
| License: | Freeware, limited distribution |
| Added: | 17th July 2022, 15:33:37 |
| Downloads: | 763 |
| Author: | Shafat Hasan, Karib Ahmed, Melus Haque, Imran Uddin |
| Size: | 41.24 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Douglas C-47 (VH-AGU) Adastra Aerial Surveys |
|
Images related to this file:
File Description:
This folder contains a repaint for version 3.14 of the Douglas C-47 by Manfred Jahn and colleagues in the colors of C-47 VH-AGU of Adastra Aerial Surveys. It was originally constructed for the USAAF in 1944 as a C-47B-35-DK and allocated the military serial 44-76336. In February 1945 it was acquired by the RAAF and allocated the serial A65-72. Operated until 1959, it was then sold to Adastra Airways and converted for civil use. In October 1964 the aircraft was re-registered to Sepal Pty Ltd, but in October 1969 it was acquired by Adastra Aerial Surveys Pty Ltd. Adastra Aerial Surveys was acquired by East-West Airlines Ltd in April 1973 and VH-AGU was re-registered to East-West Airlines on 12 November 1974. East-West won the MLS trials support contract in December 1974 and VH-AGU was re-painted in East-West colours at Tamworth in the month prior to positioning at Melbourne/Essendon for the commencement of the contract on 25 January 1975. At some stage in the late 1970s the aircraft was transferred to South Coast Aviation, another East-West subsidiary. The aircraft was withdrawn from service in August 1979 at Essendon at the conclusion of its Departmental charter, and sold to Aerodyne Pty Ltd of Moorabbin. Since then, it has had several owners, and is still airworthy, flying in a USAF Vietnam war scheme from Morwell, Victoria. Repaint by Jan Kees Blom for Manfred Jahn's C-47 version 3.14, based on the paintkit by Gman5250.
| Filename: | Douglas_C47_VHAGU_Adastra_Aerial_Surveys.zip |
| License: | Freeware |
| Added: | 22nd August 2018, 15:12:21 |
| Downloads: | 192 |
| Author: | Jan Kees Blom |
| Size: | 15.68 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Sea Bee Air Grumman Goose (ZK-ENY) |
|
Images related to this file:
File Description:
This folder contains a repaint for the Grumman Goose Redux, available at OZx, in the colors of ZK-ENY(c/n 1145), of of the Gooses that flew with Sea Bee Air from Mechanics Bay, Auckland, New Zealand, connecting Waiheke Island with Auckland between 1976 and 1988, when the company had to close its doors. Originally with the Royal Navy as FP495, it also flew with the NYPD as N1200V, went to Canada as CF-RQI and back to the US before arriving in New Zealand. It was sold to Australia in 1989 as VH-ENY and continued to Thailand as HS-TOM. It is cuurently in Germany, and has been under restauration for years now, Repaint by Jan Kees Blom, based on the paintkit by the OZx team.
| Filename: | Sea_Bee_Air_Grumman_Goose_ZKENY.zip |
| License: | Freeware |
| Added: | 11th July 2018, 17:12:21 |
| Downloads: | 165 |
| Author: | Jan Kees Blom |
| Size: | 22.6 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Republic Airlines '1985' Boeing 727-200 |
|
Images related to this file:
File Description:
Republic Airlines was formed on July 1 1979 through the merger of Southern Airlines and North Central Airlines, both major regional carriers. In 1980 Republic absorbed Hughes Airwest, also a major regional carrier. By 1984 republic was the 5th largest airline in the USA (and 7th largest in the world) with over 1,300 daily flights. They mainly flew to points in the USA, Canada, Mexico, and the Cayman Islands. Northwest Airlines was unhappy with the upstart competitor, and in January 1986 made a huge $884 million bid for Republic. Stephen Wolf, Republic's president & CEO, accepted the Northwest offer. Thus ended Republic's short life. Textures are 32 bit. This repaint is in Republic's mid 80s "Mary Tyler Moore" scheme. It was tested on P3D v3, and should work on FSX & FSX-SE.
| Filename: | Republic_Airlines_1985_Boeing_727200.zip |
| License: | Freeware |
| Added: | 12th April 2018, 00:26:39 |
| Downloads: | 63 |
| Author: | Ted Giana |
| Size: | 10.73 MB |
| Category: Flight Simulator X - Aircraft Repaints, Textures and Modifications | |
| Republic Airlines '1980 Boeing 727-200 |
|
Images related to this file:
File Description:
Republic Airlines was formed on July 1 1979 through the merger of Southern Airlines and North Central Airlines, both major regional carriers. In 1980 Republic absorbed Hughes Airwest, also a major regional carrier. By 1984 republic was the 5th largest airline in the USA (and 7th largest in the world) with over 1,300 daily flights. They mainly flew to points in the USA, Canada, Mexico, and the Cayman Islands. Northwest Airlines was unhappy with the upstart competitor, and in January 1986 made a huge $884 million bid for Republic. Stephen Wolf, Republic's president & CEO, accepted the Northwest offer. Thus ended Republic's short life. Textures are 32 bit. This repaint is Republic's original "Herman the Duck" scheme. It was tested on P3D v3, and should work on FSX & FSX-SE.
| Filename: | Republic_Airlines_1980_Boeing_727200.zip |
| License: | Freeware |
| Added: | 12th April 2018, 00:25:57 |
| Downloads: | 68 |
| Author: | Ted Giana |
| Size: | 11 MB |
| Category: Flight Simulator X - AFCAD Files | |
| MRLB - Daniel Oduber Quiros International Airport / Liberia, Guanacaste, Costa Rica |
|
Images related to this file:
File Description:
MRLB - Daniel Oduber Quiros International Airport / Liberia, Guanacaste, Costa Rica.
This airport update was made with the latest version of ADE (Airport Design Editor) and made for FSX as a replacement for the stock (default) airport. I found that most stock airports in FSX lack a decent amount of character and realism and I've tried to fix that a little bit. The stock airport file for the Liberia airport was sub par to say the least. There were absolutely no parking spots for commercial aircraft and no terminal buildings.
I've done major reworking to this airport and added the brand new terminal, which opened several months ago, I hope you enjoy. Below is a list of changes/additions. All these enhancements are as close to the real airport as I can get with stock library objects. I've used satellite images, terminal photos and maps throughout the whole process so building locations are as accurate as possible. Happy landings in Costa Rica!
Features:
*Greatly expanded parking apron
*Old terminal building added with GA parking area
*Brand new terminal building added with its 4 jetways and 3 additional ramp parking spots
*Parking lots with static vehicles
*Small current construction area
*Road that connects the airport to the main highway w/ static vehicles
*Hilton Garden Inn hotel south of runway 25
*Static vehicles and GA aircraft on the ramp
*Fire station
*Birds in the vicinity of the airport
| Filename: | MRLB__Daniel_Oduber_Quiros_International_Airport__.zip |
| License: | Freeware |
| Added: | 12th July 2012, 16:35:27 |
| Downloads: | 881 |
| Author: | Jaison Diaz |
| Size: | 7.63 KB |
| Category: Flight Simulator X - Scenery | |
| Ravenna VFR city of Italy |
|
File Description:
This scenery is the city of Ravenna in Italy city of cherries with its port and its canals. VFR point important to fly to Venice. Good VFR Flight. Within the package you will find a readme file that explains how to install the scenario.
| Filename: | Ravenna_VFR_city_of_Italy.zip |
| License: | Freeware |
| Added: | 7th September 2017, 03:34:31 |
| Downloads: | 687 |
| Author: | Pasquale Marrulli |
| Size: | 2.21 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |