Category: Flight Simulator X - Scenery
Scenery update for Munich Airport (EDDM)

File Description:
These files update the ground layout (aprons, parking positions, taxiways, ...) of Munich Airport (EDDM). Furthermore they correct the properties of some navaids and the ILS. Last but not least, some trees are being added along the motorway and between T1 and T2. For more information see readme file. All changes are reflecting AIP GERMANY AD 2 EDDM; effective: 03 JUN 2010.

Filename:	Scenery_update_for_Munich_Airport_EDDM.zip
License:	Freeware
Added:	26th July 2010, 18:11:14
Downloads:	1,766
Author:	Michael Henseler
Size:	52.25 KB

Category: Flight Simulator X - AFCAD Files
Ocean City Municipal Airport (26N), NJ

File Description:
Located 02 miles SW of Ocean City, New Jersey on 60 acres of land, Ocean City Municipal Airport is host to quite a few GA aircraft, and has plenty of room for anyone looking to fly in for a few days. Around 60 tiedown spots are available on the tarmac. The main tarmac can host planes with wingspans up to 40 feet. If you managed to fly in anything larger than that head for the west end of the field to tie down. FSX may spawn some AI craft in that area but it is not attached to the main taxi network so no planes will leave from there - the majority of planes FSX spawns in that larger spot can't handle the runway length! Be sure to check your aircraft can handle takeoffs without freezing temps and a ton of headwind before you fly in. You can gas up by stopping near the fuel truck by the terminal or by the gas tank at the west end of the tarmac. Don't ask me what that yellow circle is on the tarmac - if anyone knows you can tell *me* :P It's in the airport photos so its there. Runway touchdown markings are enabled as in real life, but apparently FSX decides not to draw them because the runway is too thin.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Ocean_City_Municipal_Airport_26N_NJ.zip
License:	Freeware
Added:	10th October 2010, 13:25:12
Downloads:	320
Author:	Drew Sikora
Size:	443.39 KB

Category: Flight Simulator X - AFCAD Files
Air-List-Ads Airport (JY07), NJ

File Description:
This is a small turf strip 1500x70 feet located near the border of NJ and PA in the northwestern part of the state. It's not officially listed so I don't have any more data than that. No services of any kind are available. Trees are summer ONLY. If you fly VFR around the area, this will at least prevent you from seeing a random-looking grass strip over some trees and half a neighborhood. Runway headings are 11/29

Scenery constructed with use of satellite images/streetview, the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	AirListAds_Airport_JY07_NJ.zip
License:	Freeware
Added:	16th October 2010, 08:57:57
Downloads:	182
Author:	Drew Sikora
Size:	283.7 KB

Category: Flight Simulator X - AFCAD Files
Central Jersey Regional Airport (47N), NJ

File Description:
Located 01 miles S of Manville, New Jersey on 119 acres of land, Central Jersey Regional Airport is a public asphalt strip. Hangars and tiedowns are offered for transient craft. The open hangar at the north of the airport is available for parking - it can be a bit of a tight fit taxiing in so I have disabled collision with the two planes nearby. You can also select the DOCK parking space to start inside the hangar. Fuel is available on the north tarmac by the fuel truck in front of the hangar, and on the south tarmac by the fuel tank. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Central_Jersey_Regional_Airport_47N_NJ.zip
License:	Freeware
Added:	25th November 2010, 14:15:25
Downloads:	295
Author:	Drew Sikora
Size:	1.92 MB

Category: Flight Simulator X - AFCAD Files
Atlantic City International Airport (KACY), NJ

File Description:
Located 09 miles NW of Atlantic City, New Jersey on 5000 acres of land, Atlantic City International Airport is a major airport serving the southern portion of New Jersey. It is also one of the main gateways for tourists looking to vacation in nearby Atlantic City, famous for its boardwalks and casinos. This airport has been very heavily modeled with many surrounding buildings and all aprons properly placed. Gates are all properly located and labeled according to the terminal chart (there are, however, no jetways like in the default scenery). General Aviation parking is available in its proper area � all aircraft in the parking area (middle of the tarmac) have collision disabled. If you select Military Cargo parking you will start on one of the helipads in the Coast Guard section. If you select Military Combat parking you will start next to the line of F-16s on ready-alert over on the Air National Guard tarmac. You can also start on a helipad north of the airport. This airport also features completely custom taxiway line and edge lighting. Because this airport uses ATC, it suffers the same bug as my KEWR airport, which is that you cannot receive taxi in directions from ATC � to gate, parking or fuel. Almost all arriving AI aircraft will also disappear from the taxiway after radioing in to ATC and failing to receive taxi instructions to the gate/parking. All traffic and instructions taxiing out works fine. All gate parking spaces have fuel, as well as the military parking and north helipad. GA aircraft can get fuel by taxiing over to the fuel station north of the GA tarmac. Taxiing onto a closed runway (marked with an �X�) will cause a crash. Broken-down taxiways are not good for your undercarriage! Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 003. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Atlantic_City_International_Airport_KACY_NJ.zip
License:	Freeware
Added:	1st February 2011, 10:28:53
Downloads:	1,355
Author:	Drew Sikora
Size:	5.12 MB

Category: Flight Simulator X - AFCAD Files
Thomas Browne Airpark Airport (61NJ), NJ

File Description:
Located 02 miles W of Glassboro, New Jersey, Thomas Browne Airpark Airport is a private turf strip 2000��80 feet. There is no hard-surfaced runway, which means you will be landing on terrain so it is recommended you set your mesh resolution as high as possible. Watch out for trees and buildings alongside and at opposite ends of the runway. Crop fields are planted to the south of the runway and border the runway. You won't crash if you run into them but it certainly won't put you in good favor with the field owners! Take caution to avoid the transmission line towers as they are not lit at night! Neither is the runway, for that matter, so daytime VFR operations only are recommended for this airfield. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Thomas_Browne_Airpark_Airport_61NJ_NJ.zip
License:	Freeware
Added:	4th February 2011, 02:47:24
Downloads:	166
Author:	Drew Sikora
Size:	1.41 MB

Category: Flight Simulator X - AFCAD Files
Stoe Creek Farm Airport (7NJ2), NJ

File Description:
Located 01 miles S of Canton, New Jersey, Stoe Creek Farm is a private turf field 1725' in length. The runway is largely clear of obstructions although on approach for Runway 05 you will deal with 20-30' trees a few hundred feet back from the threshold and there are transmission towers along the approach corridor to Runway 23 you should watch out for. The runway does have edge lighting, although the windsock is not lit at night and daytime VFR is still recommended. There are no services for transient craft at this airfield. Since you will be landing on terrain, it is recommended that your mesh complexity is set as high as possible. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Stoe_Creek_Farm_Airport_7NJ2_NJ.zip
License:	Freeware
Added:	14th February 2011, 18:32:24
Downloads:	163
Author:	Drew Sikora
Size:	700.91 KB

Category: Flight Simulator X - AFCAD Files
Bridgeport-Cahill Field Airport (6NJ9), NJ

File Description:
Located 01 miles SW of Bridgeport, New Jersey on 167 acres of land, this airport is non-existent in real life, as far as I am able to determine. although it is still listed as Active, no visible trace of anything remotely suitable for a landing strip is visible anywhere in this area. The strip mining operation nearby in some satellite/aerial photos shows a long narrow grass strip that could be used as a runway, but then others show it stripped down to bare dirt as part of the apparent mining operation, and the MegaSceneryEarth textures depict this latter representation as well. So I have simply removed visible evidence of this strip, although FSX will still try to tell you it's there in the airport directory. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	BridgeportCahill_Field_Airport_6NJ9_NJ.zip
License:	Freeware
Added:	10th February 2011, 05:01:38
Downloads:	197
Author:	Drew Sikora
Size:	209.8 KB

Category: Flight Simulator X - Scenery
KBVY - Beverly Municipal Airport - Beverly, MA

File Description:
Here is an improved version of the stock Beverly Municipal Airport. I adjusted and added aprons,roads and taxiways to more closely match real life. I replaced most default buildings and added additional buildings. I added the parking lots and static vehicles, aircraft, lightpoles, and other filler objects. I moved a radio tower that was in the middle of a UTX road. Beverly Municipal is a "reliever" airport for Logan International.

Filename:	KBVY__Beverly_Municipal_Airport__Beverly_MA.zip
License:	Freeware
Added:	18th January 2009, 12:39:19
Downloads:	832
Author:	Jim Cook
Size:	11.05 KB

Category: Flight Simulator X - Scenery
KLCI - Laconia Municipal Airport - Laconia, NH

File Description:
Here is an improved version of the stock Laconia Municipal Airport. This airport had a lot of issues with buildings on roads or in the water, boundary fences in the water, etc. I fixed those issues and adjusted and added aprons,roads and taxiways to more closely match reality. I replaced most default buildings and added additional buildings. I added the parking lot and static vehicles, aircraft, light poles, and other filler objects. The runway at Laconia was lengthened in real life and I corrected the length in FSX. It was lengthened primarily to accomodate biz jets of race teams and others attending the NASCAR events at nearby Loudon, NH. Laconia Airport is located on scenic Lake Winnipesaukee and not far from Weirs Beach. Laconia hosts a week-long motorcycle rally each June, usually a week after the Americade Rally in Lake George, NY.

Filename:	KLCI__Laconia_Municipal_Airport__Laconia_NH.zip
License:	Freeware
Added:	22nd January 2009, 03:28:31
Downloads:	764
Author:	Jim Cook
Size:	10.18 KB