Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator X - AFCAD Files | |
| Sussex Airport (KFWN), NJ |
|
File Description:
Located 01 miles SW of Sussex, New Jersey on 96 acres of land, Sussex Airport is a public asphalt strip 3515' in length. The airport is not in the best of condition and there are no markings on the taxiways. The taxiway south of the hangar towards the end of Runway 03 is closed indefinitely due to disrepair. You will have to back-taxi on the runway if you need more room to take off. Hangars and tiedowns are both available to aircraft with wingspans of 40' or less. Anything bigger will have to find a spot in the large empty area of the tarmac and make sure if you're starting out with something larger you start on the runway or in the one MEDIUM_GA parking spot. Hangar parking is identified by DOCK parking types. North Parking is located in the grass tiedown area and regular Parking is located on the main tarmac. South Parking is the one hangar towards the end of Runway 03. Jet-A fuel is available from parking in front of the fuel truck by the terminal building or in either of the hangar spots. Collision is disabled with all static aircraft to make it easier to park between them if you choose a tiedown instead of a hangar. REIL and approach lighting for Runway 03/12 are out of service indefinitely as is the approach lighting for Runway 03. The traffic pattern height has been changed to 1220' MSL (heavy aircraft use 1420').
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 006. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Sussex_Airport_KFWN_NJ.zip |
| License: | Freeware |
| Added: | 9th May 2011, 09:02:01 |
| Downloads: | 317 |
| Author: | Drew Sikora |
| Size: | 1.09 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Hackettstown Airport (N05), NJ |
|
File Description:
Located 03 miles SW of Hackettstown, New Jersey on 65 acres of land, Hackettstown Airport is a public asphalt strip 2200' in length. Fuel, tiedowns and hangars are all available for transient aircraft. For fuel, stop on the concrete pad next to the fuel tank northeast of the runway - 100LL only. Tiedowns are available both east and west of the runway - note that west parking faces the trees and if you start in one of the West Parking spots you will either need to pushback or slew to give yourself room to turn out - static aircraft collisions are off but vegetation is not. The one hangar north of the airport is open for parking, you can start there with the DOCK type parking location. This airport is not lit so daytime VFR operations only are recommended.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Hackettstown_Airport_N05_NJ.zip |
| License: | Freeware |
| Added: | 13th May 2011, 09:16:30 |
| Downloads: | 208 |
| Author: | Drew Sikora |
| Size: | 557.98 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Long Beach Airport Updated |
|
File Description:
This file contains the updated Long Beach Airport ( upto 6/30/11 ) Runway 25L now has a threshold, 34R does as well.
Runway 30 has been resized to the current size in the FAA Facility's Directory. This was the first airport I have updated and would love feedback to my email: [email protected].
This is an awesome airport with rich history and I would recommend anyone flying into the LA area to check it out. Also where I have done my flight training.
| Filename: | Long_Beach_Airport_Updated.zip |
| License: | Freeware |
| Added: | 26th June 2011, 05:06:58 |
| Downloads: | 320 |
| Author: | Mitchell Lancaster |
| Size: | 15.97 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Ekdahl Airport (NJ59), NJ |
|
File Description:
Located 04 miles S of Freehold, New Jersey, Ekdahl Airport is a private turf strip 1300' in length bordered closely by trees. This makes for an interesting landing as the 90' width of the runway is all the room you have to play with. However because it can be difficult to gauge your distance to trees and also because even the slightest brush with a tree can cause a crash, all trees immediately adjacent to the runway have crash disabled - mainly so you can turn your plane around if you land on Runway 02. The hard surface runway was removed so make sure your terrain mesh complexity is set as high as possible to get that bumpy ground realism. A windsock is listed as being available on this field but I could not locate it in any imagery and so placed it by default near the hangar building. You can start on the runways or parked in front of the hangar. Make sure your plane is capable of these take off and landing distances! Tree height around the field was not listed so I again used my best judgement from studying aerial photos. There is no fuel or parking for transient aircraft available. The field is not lit - daytime VFR operations only are recommended.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Ekdahl_Airport_NJ59_NJ.zip |
| License: | Freeware |
| Added: | 13th August 2011, 16:53:55 |
| Downloads: | 172 |
| Author: | Drew Sikora |
| Size: | 550.03 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Malone Airport (NJ61), NJ |
|
File Description:
Located 02 miles E of Frenchtown, New Jersey on 45 acres of land, Malone is a private airport with two turf strips, the longest of which is 2400' in length. There are no services offered, although there is room next to the existing planes to park if you wish - collisions are disabled with the aircraft. Both runways have their hard surfaces removed so turn your mesh settings as high as possible. Both runways slope down from the hangar/house area. Airport is unlit and daytime VFR operations only are recommended.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Malone_Airport_NJ61_NJ.zip |
| License: | Freeware |
| Added: | 20th September 2011, 13:57:18 |
| Downloads: | 284 |
| Author: | Drew Sikora |
| Size: | 958.34 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Somerset Airport (KSMQ), NJ |
|
File Description:
Located 03 miles N of Somerville, New Jersey on 210 acres of land, Somerset is a public airport with one asphalt and two grass runways, the longest of which is 2733' in length. The turf runways have no hard surfaces and you will be landing on terrain so have your mesh set as high as possible - both runways are still selectable in the ATC window for landing/takeoff announcements. AI aircraft will not use them. The helipad is a start location in front of the main terminal if a parking location is not wanted to begin helicopter flights. Parking is divvied up into three categories - GA_SMALL spots will accommodate aircraft with wingspans no greater than 40 feet. GA_MEDIUM spots will accommodate aircraft with wingspans no greater than 60 feet. GA_LARGE spots are named to identify locations suitable for starting in a glider if you wish to do so. They can also accommodate aircraft with wingspans no greater than 60 feet. In addition to tie downs, there are 13 hangars open for parking in various locations - they can be identified by GA_DOCK. Only the N Parking hangar can accommodate aircraft with wingspans no greater than 60 feet - all other hangers are suitable only for aircraft with wingspans no greater than 40 feet. Several of the hangars have attendants - look beside the doors for the NAV2 frequency to set for opening them. AI aircraft will only spawn on the north tarmac/hangars (largely to prevent AI traffic crossing the runway on taxi). All objects and static aircraft in the immediate vicinity of parking and taxiways have collision disabled. If your aircraft has a wingspan greater than 40 feet it is NOT recommended that you taxi down the middle taxiway leading to the main tarmac from N Parking as you will not clear the hangars - go either via the NW taxiway past the grass tie downs (NW Parking) or around East to the next taxi way on the other side of the east hangars (E Parking) which has more wing clearance. Fuel is available on both tarmacs north and south of the runway by stopping on the asphalt in front of the tanks/pump.
Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person.
This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Somerset_Airport_KSMQ_NJ.zip |
| License: | Freeware |
| Added: | 27th September 2011, 01:15:53 |
| Downloads: | 306 |
| Author: | Drew Sikora |
| Size: | 1.47 MB |
| Category: Flight Simulator X - AFCAD Files | |
| Suwannee County Airport - 24J |
|
Images related to this file:
File Description:
Located two miles west of the bustling town of Live Oak, Suwannee County Airport is a public use airport serving 40,000+ citizen of Suwannee County, Florida. Featuring a newly resurfaced 4,000ft runway
with numerous lighting upgrades, this airport is quickly becoming a frontrunner in GA service for Northern Florida. Home to Fessler Aviation and Suwannee County FBO, and the rapidly-developing Suwannee Landing residential community, this is a great fuel stop for inbound/outbound
pilots and virtual aviators alike! Come visit this quickly expanding airport!
Things added:
Expanded Taxiway "A" all the way to Runway 7 (which was paved in back in 1999, I do not know how ACES/Microsoft missed this...)
Lengthened Runway 7/25 from 4,035ft to its actual 4,037 feet
Added appropriate runway markings per real life
Added appropriate VASI and runway lighting systems per real life
Fixed the taxiway width and adjusted it to proper coordinates
Added 24 parking spots!
Moved Tower Viewpoint to FBO location
Increased traffic scalar from 0.70 to 1.00
Added AWOS frequency and adjusted the names of the UNICOM/CTAF
Changed apron texture from Asphalt to Concrete and added sections of temp resurfacing (all appropriate to RL airport)
Added taxiway signs
| Filename: | Suwannee_County_Airport__24J.zip |
| License: | Freeware |
| Added: | 27th January 2012, 15:16:50 |
| Downloads: | 212 |
| Author: | Alex Melia |
| Size: | 335.29 KB |
| Category: Flight Simulator X - Scenery | |
| Saratoga County Airport Fix |
|
Images related to this file:
File Description:
Saratoga County Airport (5B2) v2.0 ADE fix. Reworked ADE file to fix bad parking spot links. AI traffic navigate to and from parking spots correctly with this release. Requires 5B2_X_v2.zip
| Filename: | Saratoga_County_Airport_Fix.zip |
| License: | Freeware, limited distribution |
| Added: | 8th May 2012, 02:44:34 |
| Downloads: | 795 |
| Author: | EdGeneer Cox |
| Size: | 6.11 KB |
| Category: Flight Simulator X - AFCAD Files | |
| Lakewood Airport (N12), NJ |
|
File Description:
See ReadMe file for details. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.
| Filename: | Lakewood_Airport_N12_NJ.zip |
| License: | Freeware |
| Added: | 13th July 2012, 05:52:11 |
| Downloads: | 192 |
| Author: | Drew Sikora |
| Size: | 3.39 MB |
| Category: Flight Simulator X - AFCAD Files | |
| 4A2 - Atmautliak Airport, Alaska |
|
File Description:
Atmautluak Airport is a state-owned public-use airport located in Atmautluak, in the Bethel Census Area of the U.S. state of Alaska.
Atmautluak Airport has one runway designated 15/33 with a 3,000 by 75 ft (914 x 23 m) gravel surface. The runway was previously 2,000 by 30 ft. until it was expanded by the state.
All changes made were based on 2006 construction plans. Changed runway to 75 ft. wide.Added aprons, additional parking and buildings.
| Filename: | 4A2__Atmautliak_Airport_Alaska.zip |
| License: | Freeware |
| Added: | 28th December 2012, 00:44:08 |
| Downloads: | 332 |
| Author: | Wayne Roberts |
| Size: | 2.86 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |