Where Flight Simulation Enthusiasts Gather from Around the World!
| Category: Flight Simulator 2004 - AFCAD Files | |
| CYTZ v1.0 |
|
File Description:
This is a brand new AFCAD file for the default Toronto City Center Airport. It adds the two Air Canada Jazz gates, as well as updated taxiways, and a lot of GA parking.
| Filename: | CYTZ_v10.zip |
| License: | Freeware, limited distribution |
| Added: | 4th April 2005, 20:42:04 |
| Downloads: | 779 |
| Author: | Christian Sullivan, Norman Gao - atmosphere-imaging.tk/ |
| Size: | 205.69 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| Default New York JFK with Active Runways |
|
File Description:
A High quality AFCAD2 file for the default FS2004 New York JFK. This file has been completely rebuilt from scratch using information from the latest FAA charts (17th March 2005). All Aprons have been completely rebuilt and are modelled to be as near real as possible. Improvements have been made to the taxiways, including slight realignments where needed to avoid building collisions. The 'crosswind runway technique' has been applied to this airport to activate all runways for simultaneous use. This means all 4 runways at this airport will be used for simultaneous take-offs and landings, all the time. Full night lighting has been provided for taxiways and runways. On the default setup, more than 1 runway shared the same ILS frequency and these frequencies have now been altered by +.05 MHz to avoid conflicts. Approach lighting has been upgraded to "ALSF-2" on all runways to better assist your approaches in poor visibility. Displaced thresholds have also been modified to enable better traffic flow for landing aircraft. A 'Tower View' is now available. All real life gates at at each terminal within the airport are now available for use and they are correctly numbered as per real life and have the correct airlines assigned to them. Extra parking can be found at the GA Terminal, cargo bases and maintenance areas, and all real life helipads have been added to the airport. Additional overflow parking (remote stands) can be found at Terminal 4, UA Terminal 7 and AA Terminal 8/9. This AFCAD2 has been fully tested and all traffic flows as it should. If you have a large amount of traffic flowing thru JFK, this file will certainly bring the airport to life. Note: There are 2 versions included within this package: (1) Terminal 5 out of use as per real life (no gates added), (2) Terminal 5 in use, with gates allocated to TWA (as it was back then). See images for info. Enjoy!!
| Filename: | Default_New_York_JFK_with_Active_Runways.zip |
| License: | Freeware |
| Added: | 7th April 2005, 13:44:37 |
| Downloads: | 6,430 |
| Author: | Lee Brompton |
| Size: | 282.56 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| Norman Y. Mineta - San José International Airport, California (KSJC) v2 |
|
File Description:
Modified version of my KSJC AFCAD2. Fixed some taxiway and gate location inaccuracies. Added 3 gates, (American, Southwest and United) and just touched up a few details here and there to make it as real as I could. Thanks for looking.
| Filename: | Norman_Y_Mineta__San_Jos_International_Airport_Cal.zip |
| License: | Freeware, limited distribution |
| Added: | 7th April 2005, 22:01:36 |
| Downloads: | 752 |
| Author: | Jaxan Prier |
| Size: | 7.52 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| EDDT Berlin Tegel for Aerosofts Newest German Airports 3 |
|
File Description:
This AFCAD is only for use with Aerosofts Newest German Airports 3 FS2004 Version of Berlin Tegel Airport.
| Filename: | EDDT_Berlin_Tegel_for_Aerosofts_Newest_German_Airp.zip |
| License: | Freeware |
| Added: | 8th April 2005, 03:21:34 |
| Downloads: | 1,235 |
| Author: | Juerg Bertschinger |
| Size: | 183.75 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| RPVB Bacolod Of "ARCH'T VER WALTER L. GULFAN" |
|
File Description:
Afcad2 file for the RPVB Bacolod airport scenery of Arch't. Ver Walter L.Gulfan
| Filename: | RPVB_Bacolod__Of_ARCHT_VER_WALTER_L_GULFAN.zip |
| License: | Freeware |
| Added: | 10th April 2005, 01:06:50 |
| Downloads: | 637 |
| Author: | Johan Thiers |
| Size: | 1.75 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| Indianapolis International Airport, Indiana (KIND) |
|
File Description:
This file increases the number of gates at the FS2004 default Indianapolis, Indiana airport (KIND) and adds some new cargo parking spots as well. It includes realistic parking as per the Indianapolis airport webpage (which doesn't list individual gates so I made it as close as possible).
This file was made using Kenneth Weik's original FS2004 AFCAD file for KIND as a base and is uploaded with permission of the original author.
| Filename: | Indianapolis_International_Airport_Indiana_KIND.zip |
| License: | Freeware |
| Added: | 10th April 2005, 05:14:40 |
| Downloads: | 1,694 |
| Author: | Denny Payne |
| Size: | 8.68 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| Flying Cloud AFCAD2 Fix |
|
File Description:
This is an AFCAD2 file for FS2004 that fixes the runway numbers for Flying Cloud Airport in the Twin Cities. The actual runway numbers, and the ones in this AFCAD2 are 10L/28R, 10R/28L, and 16/32. Microsoft had 9L/27R, 9R/27L, and 16/32. The only minor problem is that this does not fix the taxiway signs.
| Filename: | Flying_Cloud_AFCAD2_Fix.zip |
| License: | Freeware |
| Added: | 10th April 2005, 17:28:52 |
| Downloads: | 190 |
| Author: | Warren Goldstein |
| Size: | 4.16 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| KLKP - Lake Placid Airport |
|
File Description:
The default KLKP had no connected parking spots. I added some small and medium GA spots and properly connected them to the runway. All parking spots are far enough away from the fuel station so that your aircraft will not be refueled unless you move it to the fuel pumps. I also removed some of the rather narrow and winding taxiways that weren't wide enough for even a single engine aircraft. I could find no information on this airport, other than a satellite picture to go on. I do not know how accurate this file is related to the real-world airport, but I did the best I could given the location of aircraft in the photo.
| Filename: | KLKP__Lake_Placid_Airport.zip |
| License: | Freeware, limited distribution |
| Added: | 11th April 2005, 01:42:45 |
| Downloads: | 463 |
| Author: | Craig Swartzlander |
| Size: | 3.52 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| KPHX - Phoenix Sky Harbor Airport |
|
File Description:
This is an AFCAD2 for the default Phoenix Sky Harbor airport. My most accurate AFCAD yet. I was able to use the jetway shadows and others objects on the default land mass to accurately place each gate in the exact real life position they were when the photograph was taken. I utilized other satellite images and many photos from airliners.net to help verify exact gate and airline locations. Only difference here unfortuantely is there are no jetways, only jetway shadows. Maybe someone can make some jetways for this KPHX? 99.9% of all gates at the real airport are present in this AFCAD, and properly numbered. I've also included the cargo and military ramp, America West and Southwest maintenance parking, as well as added a few GA gates for you civil flyers. This AFCAD is roughly as of March 2005, so parts of Taxiway Echo near Terminal 4-D are closed and under construction in the AFCAD. I've closed 8/26 for takeoffs and used it with 7R/25L for landings. 7L/25R will be used as the primary takeoff runway. I think that covers everything. If you have time, select the Top-Down view in your sim, and you can see all the jetways from the land mass lined up with each aircraft. Kinda cool, enjoy! :) If there are any errors, let me know. Thanks.
| Filename: | KPHX__Phoenix_Sky_Harbor_Airport.zip |
| License: | Freeware, limited distribution |
| Added: | 12th April 2005, 01:10:49 |
| Downloads: | 3,231 |
| Author: | Jaxan Prier |
| Size: | 18.06 KB |
| Category: Flight Simulator 2004 - AFCAD Files | |
| London - Heathrow, United Kingdom (EGLL) |
|
File Description:
AFCADv2 (FS2004) for EGLL London Heathrow, 2005, Default scenery, as per AIS document (Dec 04). Changes from Default version:---Most gates assigned, taxiways renamed as per AIS document (Dec 04). Taxiways A and B re-aligned to prevent aircraft hitting buildings as was the case before with the default AFCAD. Terminal 3, pier 6 changes added too. New Terminal 5 parking spaces added (10 spaces) and ramp areas as per AIS document (Dec 04). Closed taxiways addded to tidy up taxiway lighting. RWY 09L/27R for Landing, 09R/27L for takeoff. Produced, April 2005. Asix9 © 2003-2005. My apologies to previous downloaders of my last version, I missed off installation instructions and scenery.cfg changes to remove the trees and houses. Its all in here now!
| Filename: | London__Heathrow_United_Kingdom_EGLL.zip |
| License: | Freeware, limited distribution |
| Added: | 16th April 2005, 19:39:17 |
| Downloads: | 10,171 |
| Author: | Pete Davies |
| Size: | 42.2 KB |