Where Flight Simulation Enthusiasts Gather from Around the World!
AVSIM Library - Search Results
| Category: Flight Simulator 2004 - Scenery | |
| Dawson Creek CYDQ in British Columbia, Canada UPDATED |
|
Images related to this file:
File Description:
This is a revised version of Dawson Creek CYDQ and the floats base CBD3, made primarily to provide one of the parked planes with it's textures but also to improve the apron markings and the AI. The float AI now includes Beavers and I also removed two planes that were not properly showing their textures in my current FS9 installation. The Beavers were included in my post of Nimpo Lake CAF8 and will need to be installed to show up here. This version is complete in itself and can be installed as-is if you do not have the original scenery. Dawson Creek is at 2,148 feet asl just east of the Rocky Mountains, less than 10 miles west of the BC/Alberta border and where the Rockies are at their narrowest. The population grew when the Northern Alberta Railway was extended to Dawsons Creek in 1932, and grew even more more when the Alaska Highway was built in 1942, starting from Dawsons Creek. In the 1950's the town was linked through the Rockies by a railway and a road to the BC interior, and the town grew again. Now it is static at just under 12,000 and once again has become a farming centre, with Fort St John and Grand Prairie winning out for new industry and commerce. The airport is just to the east of the town. The runway is 5,000 feet of wide asphalt (150 feet) aligned 06/24, lit, and with PAPI and approach lights. There is also a water runway for float planes, separately designated as Dawson Creek CBD3. The two effectively operate as one; traffic for both use the mandatory frequency of 122.2 and talk to one controller in one control tower. However, in FS9 the ATC for two separately designated airfields (or float fields) operates as if they are nowhere near each other and takes no notice of near misses between the two lots of planes. As a result I have put them both in un-manned tower mode so you will announce your position and intentions and select your own parking spots, either next to one of the hangars or on the grass. The aprons vary from asphalt, to concrete, onwards to gravel, and then further onwards to some gravel amid the bare dirt; I have replicated this variation as far as FS9 permits.
| Filename: | Dawson_Creek_CYDQ_in_British_Columbia_Canada_UPDAT.zip |
| License: | Freeware, limited distribution |
| Added: | 17th December 2018, 17:50:08 |
| Downloads: | 205 |
| Author: | Roger Wensley |
| Size: | 26.71 MB |
| Category: Prepar3D V1-4 - Aircraft Repaints, Textures and Modifications | |
| Alaska Airlines "HONORING THOSE WHO SERVE" livery Operated by Horizon Air E175LR (N651QX) |
|
Images related to this file:
File Description:
I am proud to present this very special Alaska Airlines Embraer E175LR, operated by Horizon Air, registration N651QX. This E175LR is the third "Honoring Those Who Serve" aircraft in the Alaska Airlines fleet which pays tribute to US military members, veterans, fallen soldiers and their families. Its unique exterior paint scheme, conceived by a small group of Alaska maintenance technicians, was designed to honor those who serve today, and those who served in the past. The design includes; A red stripe and blue aircraft body to incorporate elements of the American flag, the phrase "Honoring Those Who Serve," displayed on the fuselage, symbolic crests representing the Alaska Airlines Fallen Soldier Program on the starboard side rear cargo door and on the port side of the aircraft behind the aft service door, a "Horizon Air Salutes" medallion near the nose of the aircraft on both sides with the five stars, winglets in red, white and blue representing the flag of the United States and five gold stripes on the engine cowls representing the five branches of the U.S. Armed Forces. There is also a Sidney Sheldon quote next to the forward passenger entry door reading “My heroes are those that risk their lives to protect the world and make it a better place.â€
The repainted textures in this package are 32-bit with no mipmaps for best clarity and quality. All of the medallions are hand painted. This is the Version 3 model of the FeelThere Embraer 175. You must own a copy of the Feelthere E-JETS E175 and E195 V3 to enjoy this repaint.
A special thank you to all who serve, who have served and to those who gave their lives in service to this country.
| Filename: | Alaska_Airlines_HONORING_THOSE_WHO_SERVE_livery_Op.zip |
| License: | Freeware, limited distribution |
| Added: | 29th April 2020, 19:09:32 |
| Downloads: | 831 |
| Author: | Jeffrey S. Bryner, FeelThere |
| Size: | 56.71 MB |
| Category: Flight Simulator 2002 - AI Flight Plans | |
| Delta Connection - Skywest schedule |
|
File Description:
Includes all Delta Connection flights operated by Skywest Airlines. The hubs used for these flights are Salt Lake City and Dallas/FtWorth. Most flights are short hops into smaller cities and towns in neighboring states. The flight plans mesh perfectly with Skywest's current Delta Connection fleet of 47 CRJ-200s and 15 EMB-120s. Requires TTools v1.3.2 by Lee Swordy. AFCAD highly recommended.
| Filename: | Delta_Connection__Skywest_schedule.zip |
| License: | Freeware |
| Added: | 17th December 2002, 05:34:21 |
| Downloads: | 1,364 |
| Author: | Allen Bagwell |
| Size: | 10.86 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Sitterdorf (LSZV) for Suisse 2004 |
|
File Description:
New airport for Suisse 2004. Works for FS2002 and fully compatible with FS2004. Includes 2 airport files depending of the mesh you use. Please read the doc. Features usual goodies of Suisse 2004 : seasonal textures, smoke effect, VAC chart, integrated ground texture, etc. Sitterdorf is a small private airfield far East of Switzerland. It has 2 minicars tracks and a small fun park.
| Filename: | Sitterdorf_LSZV_for_Suisse_2004.zip |
| License: | Freeware |
| Added: | 7th March 2004, 17:27:39 |
| Downloads: | 7,068 |
| Author: | Daniel Gauthier |
| Size: | 5.88 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Eagle Creek Landing, Washington State, USA |
|
File Description:
Eagle Creek Landing is situated some 7 NM West of Fairchild International on a nice lake surrounded by mountains. The runway is steel mesh lit by hand laid kerosene torches at night. There is a dock and a floating hangar for seaplanes. It is a small field but full of candies. Sounds included for those who have the Lago program.
| Filename: | Eagle_Creek_Landing_Washington__State__USA.zip |
| License: | Freeware |
| Added: | 15th March 2004, 06:16:00 |
| Downloads: | 2,825 |
| Author: | Leon Louis |
| Size: | 4.58 MB |
| Category: Flight Simulator 2004 - Scenery | |
| Chiang Mai Thailand (VTCC) |
|
File Description:
This is scenery for Chiang Mai, Thailand. It also creates scenery for two smaller airfields nearby (Lanna and Lamphun). This is a complete rebuild of the default airport, and inlcudes all gates, the cargo area, and the Air Force base. The scenery is fully compatible with my mesh scenery that I had created for Thailand. An AFCAD2 file, and landclass is included.
| Filename: | Chiang_Mai_Thailand_VTCC.zip |
| License: | Freeware, limited distribution |
| Added: | 18th January 2004, 19:49:31 |
| Downloads: | 7,090 |
| Author: | Martin Strong |
| Size: | 6.67 MB |
| Category: Flight Simulator 2004 - Scenery | |
| FS2004 detailed KWYS Yellowstone |
|
File Description:
FS2004 EZ-LAGO KWYS Yellowstone
This detailed scenery replaces my previous KWYS and is FSX ready.
Covers airport and some surrounding area. Area outside of
airport needs FS Global or Abacus Extreme Landscapes for
elevation mesh. LAGO registered version AND free EZ scenery library
necessary for all items to show. If you do not have LAGO
try anyway you can still enjoy it.
| Filename: | FS2004_detailed_KWYS_Yellowstone.zip |
| License: | Freeware |
| Added: | 8th June 2006, 03:00:48 |
| Downloads: | 1,317 |
| Author: | Jimmy R Martin |
| Size: | 711.88 KB |
| Category: Flight Simulator 2004 - Scenery | |
| Hamilton City 2006 V1 |
|
File Description:
Hamilton City 2006 V1 is a photo real city adding over 30 odd custom built buildings for the Hamilton city area and a heliport at the Waikato hospital
this can be used with or without add ons such as robin corns godzone hamilton realnz photoreal landclass,best used with real hamilton and with a good mesh but not nessesary ,
enjoy..
| Filename: | Hamilton_City_2006_V1.zip |
| License: | Freeware |
| Added: | 11th December 2006, 03:23:21 |
| Downloads: | 1,715 |
| Author: | Mike Allen-Andrews |
| Size: | 3.26 MB |
| Category: Orbiter - Miscellaneous Files | |
| Moon3D |
|
File Description:
Complete mesh of the Moon's surface gives impression of topography from low orbit. Default installation uses eight 2048 x 2048 surface textures, may not be compatible with older or lower spec graphics cards. Alternative "Low-res" 512 x 512 surface textures are included, see Doc/moon3d_README.txt for installation instructions.
Tested on Orbiter version 060929, Windows XP, nVidia FX5600XT graphics card (128Mb).
| Filename: | Moon3D.zip |
| License: | Freeware |
| Added: | 15th March 2007, 15:04:12 |
| Downloads: | 1,256 |
| Author: | Brian Jones |
| Size: | 14.36 MB |
| Category: Flight Simulator X - Scenery | |
| EGNG Samlesbury Airfield |
|
File Description:
Samlesbury Airfield nr Preston. Home to the Canberra, the EE Lighning and the ill fated TSR2 Project. Blended to fit Horizon GenX Scenery and Mesh the tabletop/cliff edge effect has been removed. Requires Runway12 libraries to display as included pictures. The included AI flight file has been supplied by Gerry Winskill and requires the Canberra file baccanb.zip by Bill 'Tornado' Holker
| Filename: | EGNG_Samlesbury_Airfield.zip |
| License: | Freeware, limited distribution |
| Added: | 19th October 2007, 09:35:02 |
| Downloads: | 1,124 |
| Author: | Tony Meredith |
| Size: | 753.76 KB |
© 2001-2026 AVSIM Online
All Rights Reserved
Privacy Policy |