AVSIM Library - Search Results
|
Login | Register | About logging in and out
|
Searching for: 'ez*' in AVSIM File Library and below.
|
|
|
|
File Description: Now, after a long construction period and many hours of free time,
the new FSX airport LIEO-Olbia-Sardinia is finally finished, of
course as always with lots of details and a few extras.........
So off we go, off to Sardinia to the Costa Smeralda, preferably
with an A 321 or a Boeing 737, where you switch to a helicopter or
a smaller aircraft and explore the landscape in detail, including
the port, which has a heli pad for them VIP guests or you can take
a fire-fighting plane and help put out the fire. Of course, in the
direction of the hot air balloons, please first fill up with water
in the sea.............
Installation:
Unpack the zip folder: then copy the FSX-LIEO-Olbia folder into
the FSX addon folder, start the FSX, go to settings, scenery
library, add area, press OK, then you can start.
Extras:
! If you already have one of these files activated in your scenery
library, you do not need to install it again.
For all extras, the respective file must be copied individually
into the Addon Scenery folder and activated individually in FSX as
described during installation.
File: 3DPeople_Lib............ (to see people)
File: ObjLib-Large-Car-Parking-FSX.............(parking spaces and
vehicles)
File: PKP...........(to see trains and wagons)
File: Cobus.........(to see buses)
File: FSX_LTS......(lights and light poles)
File: EZ object Library.......(! Most important file for numerous
accessories + buildings)
! Note whoever installed the old EZ Object Library from me before
October 25th, 2023 should install this new one here and delete the
old one in FSX because I have completely revised it!
Candy:
As a treat, I'll give you the Canadair CL215 firefighting plane
that is stationed in Olbia 1x as AI traffic + 1x for flying
yourself..............
You can find more information on my YouTube channel
https://www.youtube.com/channel/UC7vHXQMa3hhU2iGtODXlkHw/videos
Filename: |
fsx-airport-lieo-olbia.zip |
License: |
Freeware |
Added: |
29th October 2023, 12:01:15 |
Downloads: |
235 |
Author: |
Ewald Wagner alias Jamaika |
Size: |
248586kb |
|
File Description: Here comes my current project after a long construction period with
lots of details for the FSX
(Please test P3d yourself) EDDM-Munich after the renovation with the
new terminal
currently 2024 and current buildings.................
So enjoy the many details and start or land in Munich......
Downloads will be available soon on Simvation.com, Avsim or
Flightsim.
Jamaica's FSX channel wishes you a lot of fun...
and of course freeware like all my airports................
Installation:
Copy the EDDM-Munich Scenery folder into the FSX addon folder,
the FSX start
go to settings, scenery library, add area, press OK,
the same applies to the EZ Object Library folder
+ the 3DPeople_Lib folder if you haven't activated it yet.
This means you can see extra buildings, people and lots of details.
Find out more about it on my YouTube channel
https://www.youtube.com/channel/UC7vHXQMa3hhU2iGtODXlkHw/
videos
Support:
Questions and help on my YouTube channel
or by email to jam_aika@hotmail.de
And now have fun in Munich
Jamaica
Filename: |
eddm-münchen-fsx.zip |
License: |
Freeware |
Added: |
20th February 2024, 14:47:38 |
Downloads: |
449 |
Author: |
Jamaika alias Wagner Ewald |
Size: |
208496kb |
|
|
|
File Description: Monumentum Ilyushin Il-76TD in Turkmenistan Airlines livery. Texture only for freeware Monumentum model. Repaint by Sergey Gleba aka serg09. Link to my products on SimMarket: http://secure.simmarket.com/paintsim.mhtml
|
Filename: |
monumentum_il-76td_turkmenistan_by_serg09.zip |
License: |
Freeware |
Added: |
26th May 2019, 18:21:01 |
Downloads: |
135 |
Author: |
Sergey Gleba | PaintSim |
Size: |
129215kb |
|
File Description: FSX - Scenery Objects - Viewer
This viewer presents pictures in thumbnails and larger versions of all FSX default objects including autogen. Each object is viable as a thumbnail and by clicking on the thumbnail this will pull up a larger image of the object. All objects can be sorted by Category, GUID and alphabetical. This is very useful for working with Instant scenery and EZScenery object placing programs. The thumbnail images for all available 3D objects in FSX. Images have been generated automatically, so they may not be perfect, and some of them are totally out of bounds. Some others are not textured or invisible due to bad models or fancy reference points. Note that geolocked objects (most landmarks) are not present since you cannot use them safely in your own scenery.
Filename: |
fsx_-_scenery_objects_-_viewer.zip |
License: |
Freeware |
Added: |
15th October 2010, 02:12:19 |
Downloads: |
1723 |
Author: |
Bryan Wallis |
Size: |
127988kb |
|
File Description: Well it starts like always, I can't find a usable freeware airport in this
case for the DTTJ Djerba-Zarzis so I'll build it myself again.........
well what can I say here it is built as real as possible with many details
with the standard scenery after a lot of work ..........
So fly to Tunisia to the island of Djerba, of course with an Airbus A321 or
a Boeing 737. There you change to a helicopter or a smaller plane and
look around the area...Tip: Zarzis is near the port a helipad......
Installation:
copy the folder DTTJ Djerba Scenery into the addon folder of the FSX,
start the FSX go to settings, scenery library, add area, press OK, then
you can already start.............
Extras: to be able to see people, I deliver the file 3DPeoble_Lib, copy it
into the Addon Scenery folder and activate it in FSX as described during
the installation and you can already see people......
the same applies to all files that are supplied to see more details in the
FSX folder Addon Scenery copy individually and activate in FSX you
should have already activated one of these files! You don't need to install
it again! EZ-Scenery-Object Files ( for extra buildings and accessories )
...... RCJ-Neoplan............( Buses ). airport_restaurants_ss_fsx..........
( extra building ) Parking lots_large_ss_Fsx.Bgl........( vehicles and
parking lots) Lightobj.bgl......lights and light poles......... more about it on
my youtube channel https://www.youtube.com
/channel/UC7vHXQMa3hhU2iGtODXlkHw/videos
Support:Questions and help on my YouTube channel or by email to
jam_aika@hotmail.de And now have fun In Djerba Jamaica
Filename: |
fsx-dttj_djerba-zarzis.zip |
License: |
Freeware |
Added: |
18th September 2023, 14:53:38 |
Downloads: |
173 |
Author: |
Wagner Ewald alias Jamaika |
Size: |
84912kb |
|
Images related to this file:
|
File Description: Big area to fly North of Washington State, between Victoria, Vancouver and Seatle. Orcas, Sucia, Central, Decatur, San Juan, Blakely, Waldron, Crane,... All those islands are photoreal, with seasonal textures and autogen. 9 airfields, 4 in high definition, with buildings (as near as possible from the reality). With a lot of details to give life!
You will need some EZ and RWY12 libraries. All instructions included. Please read them carefully.
|
Filename: |
orcas_islands.zip |
License: |
Freeware |
Added: |
27th July 2010, 20:52:56 |
Downloads: |
2104 |
Author: |
Daniel Gauthier |
Size: |
81433kb |
|
File Description: well it starts as always, i can't find any usable freeware airport in this case for
the VNLK - Lukla Airport so I'll build it myself again...............
well what can i say here it is after a lot of work as real as possible with a lot of
details with the Default scenery built ..........
starts from Kathmandu as in the original with a propeller plane or a transport
heli and brings the climbers and adventurers to the Himalaya Mountains.........
Installation:
copy the folder VNLK-Lukla Scenery into the addon folder of the FSX, start the
FSX Settings, change scenery library , add area, press OK , after that you can
already start............
Extras:
to be able to see people I deliver the file 3DPeoble_Lib with you can
also put it in the Copy the addon folder and activate it in FSX as described
during installation and you'll see you people..............
the same applies to EZ-Scenery-Object files for extra buildings! ( Lukla building )
! Danger ! You don't need these files if you already have them. !
There is a video about my airport on Youtube https://youtu.be/uffenHkCKao
Support:
Questions and help on my Youtube channel
https://www.youtube.com/channel/UC7vHXQMa3hhU2iGtODXlkHw
or by email to jam_aika@hotmail.de
And now have fun learning to land under difficult conditions.....
Filename: |
vnlk-lukla-fsx.zip |
License: |
Freeware |
Added: |
8th April 2023, 01:34:00 |
Downloads: |
202 |
Author: |
Wagner Ewald alias Jamaika |
Size: |
78836kb |
|
Other files which are related to, or may be required by, this file:
Images related to this file:
File Description: FSX Scenery Object Libraries. This package contains over 400 objects I have created for the FS9 & FSX Flight Simulators. I use Instant Scenery for object placement, but they should work with any object placement method. These object libraries will be required for several scenery areas I plan to release for FSX, including Furnace Creek in Death Valley, Avalon on Catalina Island, the North Rim of the Grand Canyon, and the California Mission PAK #3, which includes all 22 of the historic California Missions. By Ron Ezra.
Filename: |
rweobjv5.zip |
License: |
Freeware |
Added: |
1st January 2016, 17:49:21 |
Downloads: |
2807 |
Author: |
Ron Ezra |
Size: |
71150kb |
|
Other files which are related to, or may be required by, this file:
File Description: 33 Colombian Airports for FS9 default scenery and the Colombia freeware mesh by Raimondo Taburet. I also recommend the San Andres Landclass and modified coastlines by Juan Sebastian Gonzalez (sandres_lc.zip at avsim.com). However, the scenery should also work with the default or any other mesh but I have not tested it.
The airports are based on GoogleEarth and airport layout data with generic objects added. Position of the airports has been corrected, ramps added, some generic buildings and objects added to most of the airports. All files start with the ICAO identifier of the airport; so you can take out what you don't like or use only what you like.
The package includes the following airports:
SKAM, SKAO (now SKMJ), SKAS, SKBN, SKBO, SKBQ, SKCB, SKCC, SKCL, SKFL, SKGO, SKGY, SKIB, SKLA, SKLT, SKMG, SKMP, SKMR, SKMU, SKOC, SKOT, SKPB, SKPV, SKQU, SKRG, SKSP, SKTJ, SKTL, SKTM, SKUC, SKUL, SKVP, Z09A.
NOTE:
There a two files, colapts1.zip with the airport sceneries and screenshots, and colapts2.zip with the object libraries; colapts2.zip is only needed if you don't have already the rwy12 and ez-objects libraries used.
Filename: |
colapts1.zip |
License: |
Freeware |
Added: |
24th May 2014, 18:34:00 |
Downloads: |
3083 |
Author: |
Detlev J. Rohmer |
Size: |
66197kb |
|
|
File Description: The National Airport "Ezequiel Zamora" is an airport located in the city of San Carlos, being the most important of the Cojedes State
Recently remodeled which includes the adequacy of the runway for aircraft such as the McDonnell Douglas DC-9, Boeing 737, Airbus A319. Photo-terrain area improved with Autogen files.
Only compatible with versions of FSX, P3Dv1.x or P3Dv2.x. Also includes a friendly Auto-Install.
|
Filename: |
svcj_setup.zip |
License: |
Freeware |
Added: |
27th July 2014, 18:01:12 |
Downloads: |
989 |
Author: |
David Maldonado |
Size: |
62756kb |
|
|