AIFlow SimConnect Utility for P3D v4

Images related to this file:

• aiflow_v110-1.png

File Description:
AIFlow v1.1 is a simconnect utility designed to ease AI congestion and go-arounds at the airport the user is departing from and arriving at. AIFlow does this by enforcing spacing minimums between arriving AI aircraft resulting in more orderly arrival patterns. AIFlow also supports spacing spacing minimums between the AI aircraft and the USER’s aircraft when the user is flying (during all phases of the user's flight). For added realism, AIFlow adds landing effects (e.g., micro bank and pitch corrections that scale up during crosswind conditions) to the AI on short final approach. The user can also briefly squawk 1234 in their aircraft to temporarily suspend landings so that the user can find a slot to depart a busy runway. AIFlow is designed to compliment the default P3D AI program and thus is fully compatible with any AI-related program that is compatible with the default AI program (e.g., AIG, Ultimate Traffic Live, Radar Contact, etc.). AIFlow is targeted to Prepar3D version 4.5 or 5.0, specifically SimConnect Version 4.5.0.0 or later. AIFlow operates externally via simconnect and thus makes no changes to the P3D sim. NEW for v1.1: (1) detect and correct AI performing poor approaches (e.g., dive-bombing, descent into terrain) under control of the P3D AI engine, (2) user can specify minimum and maximum AI approach speeds in terminal area, (3) prevent AI from stopping on runway when user landing, (4) AI plane spotting mode only, (5) external database fallback in case simconnect fails to provide local airport data, (6) adjustable in-sim message level, (7) periodic read of .ini file to tweak parameters more easily, (8) AIFlow starts minimized. FIXES for v1.1 include: sequencing in heavy AI traffic would sometimes cause excessive go-arounds, going around AI would sometimes improperly hold, changing AI spacing from default value did not have any effect, sometimes user aircraft would get controlled, .ini file would sometimes get confused reading parameter values having whites spaces.

AIGround SimConnect Utility for P3D v4

Images related to this file:

• aiground_v110-1.png

File Description:
AIGround is a simconnect utility designed to improve AI taxi characteristics at the airport the user’s aircraft is located at. AIGround holds the AI stationary on the tarmac after pushback for a more realistic amount of time before the AI begins its taxi out and optionally performs an extended pushback including more realistically turning the AI toward the apron. The AI will also perform control surface checks as the AI begin their taxi out. Finally, AIGround enforces better spacing between AI and the user’s aircraft when the user is performing a taxi-out or taxi-in. AIGround does this by commanding the AI to temporarily stop in situations that the normal P3D AI control program would miss. In situations where the user might want the AI to pass (e.g., giving way at an intersection), the user can flash the landing lights on the user’s aircraft (on, then quickly off) as a signal to the AI to continue the taxi. AIGround also allows the user to adjust AI landing and takeoff lengths. AIGround is designed to compliment the default P3D AI program and thus is fully compatible with any AI-related program that is compatible with the default AI program (e.g., AIG, Ultimate Traffic Live, Radar Contact, etc.). AIGround is also compatible with the AIFlow simconnect utility. AIGround is targeted to SimConnect Version 4.5.0.0 or later. AIGround operates externally via simconnect and thus makes no changes to the P3D sim. NEW for v1.1: (1) adjust AI landing and takeoff length, (2) option for AI to perform extended pushback including turns, (3) option to disable control checks (for compatibility with certain AI sets), (4) AI plane spotting mode only, (5) adjustable in-sim message level, (6) Periodic read of .ini file to tweak parameters more easily, (7) AIGround starts minimized. FIXES for v1.1: (1) output consolse sometimes froze, (2) AI cyclic stop-start, (3) .ini file would sometimes get confused reading parameter values having whites spaces.

Airport list conversion utility for FSMOVMAP2

Images related to this file:

• fsmvmp2_airport_list-1.jpg

File Description:
Powershell Script to create an airport list for FSMOVMAP2. Script can be modified for other purposes regarding FSX/P3D airport information. Required input to the script (runways.xml) must be generated by Makerwys.exe (4.873 upwards recommended) of Peter Dowson. This file contains the following bug corrections: - 09.08.19: mark unused secondary ILS with "-1" (App suppress them) instead of "-2" (App displays the value "-2") - 10.09.19: skip ILS with heading but without frequency

Airport list conversion utility for FSMOVMAP2

File Description:
Powershell Script to create an airport list for FSMOVMAP2. Script can be modified for other purposes regarding FSX/P3D airport information. Required input to the script must be generated by Makerwys.exe (minimum 4.873) of Peter Dowson. This file contains a bug correction that marked unused secondary ILS with "-2" (App displays "-2") instead of "-1" (App displays nothing)

AITTP 2019 v2.0 AI Taxispeed and Timeout Patcher for P3D v4.5

Images related to this file:

• -1.gif

File Description:
AITTP 2019 v2.0 AI Taxispeed and Timeout Patcher for P3D v4.5 (including backwards compatible to v4.x and all v3.x of P3D) This utility will allow you to select your AI aircraft taxispeed if you desire to increase or decrease this setting (range from 20 kts up to 40 kts in intervals). Also you can select your AI aircraft timeout settings (range 5:00 minutes up to 15:00 minutes in intervals). Check your current speed and time settings, create backup and/or restore functions. Just unzip in folder/drive location of your choice and start -exe to use. Included Readme.txt gives easy to follow steps. Easy to use program for P3D only, FSX support has been eliminated. Latest version v2.0 (2.0.0.0) adds support for P3D v4.5 including all v4.x and all P3D v3.x versions. Created by Jorge Buchelli FSFlorida

AxisViewer 23.7.6

File Description: Detailed user manual included. For each aircraft control surface selected, AxisViewer will show the position of the joystick axis attached to the control surface, and the actual position of the control surface according to FSX/P3D. The benefits are: * Positive feedback on Control Surface Position. Ever ask yourself "Self, just what is that autopilot/autothrottle doing, anyway?!" * Allow you to manually adjust the Axis Positions to match the Control Surface Positions, so that you don't get a nasty surprise (for example, sudden change in thrust) when the autopilot and/or autothrottle is disengaged. * Verification of joystick functioning and range of motion. * Clear indication of when "dead zones" are entered. You will see the Control Surface Position "snap" to a particular value as the Axis Position approaches the dead zone.

Filename:	axisviewer_23.7.6_395852.zip
License:	Freeware, limited distribution
Added:	3rd August 2023, 19:00:39
Downloads:	41
Author:	William Ruppel
Size:	46552kb

Banking Camera v1.2

File Description:
Banking camera is a unique piece of software that simulates the "banking" of the virtual cockpit view. Built as an exe and connecting to the simulator via simcconnect means this little utility has functioned for all the FSX/ESP based sims and will probably continue to do so. Has been tested and confirmed as functional in the following sims FSX, FSX-SE, P3Dv3, P3Dv4. This is the last known release from the developer's website prior to the website becoming defunct, and would superceed any previous public releases should they exist in the library.

Beechcraft King Air 200 - Performance and fuel planner V1.2

Images related to this file:

• b200_performance_and_fuel_planner_1_2-1.jpg
• b200_performance_and_fuel_planner_1_2-2.jpg
• b200_performance_and_fuel_planner_1_2-3.jpg
• b200_performance_and_fuel_planner_1_2-4.jpg
• b200_performance_and_fuel_planner_1_2-5.jpg
• b200_performance_and_fuel_planner_1_2-6.jpg
• b200_performance_and_fuel_planner_1_2-7.jpg
• b200_performance_and_fuel_planner_1_2-8.jpg
• b200_performance_and_fuel_planner_1_2-9.jpg
• b200_performance_and_fuel_planner_1_2-10.jpg

File Description: To establish a flight with this excel file, enter Crew and passengers weight, then input datas in "flight datas" page, then using orange buttons, complete each page (you can return to the menu by clicking on the title of each page), finally, you can print the weight and balance card and datas card, this datas card resume all performance and flight parameters, and, of course, the fuel planning. Fuel weight, in the weight and balance page please estimate the fuel weight, enter all data then go back to this page to adjust your estimation have the exact fuel weight, this is an excel limitation!

Filename:	b200_performance_and_fuel_planner_1_2.zip
License:	Freeware, limited distribution
Added:	9th February 2016, 22:58:04
Downloads:	1254
Author:	Frederic Furst
Size:	1320kb

BizJet (AI) flightplans for Flightplan Visualizer

File Description:
This package contains +380 AI BizJet flightplans made by Eric Steinmetz as part of his AI BIZJET PROJECT. I would like to offer a big Thank You to Eric for alowing me to present these flightplans converted to the format used by Flightplan Visualizer. In versions prior to 1.11 these files were bundled directly with the Flightplan Visualizer installer, however from version 1.11 they are instead available as this separate/optional package. To use these flightplans you need the program Flightplan Visualizer (version 1.11 or above). All of the ".BFP" files needs to be copied to the folder: "C:\Users\[UserName]\AppData\Roaming\FlightplanVisualizer\Flightplans", where "[UserName]" naturally needs to be replaced by your windows user-name. Once the files have been copied to this folder they will automatically be loaded the next time you start Flightplan Visualizer. If you run into any problem please use the forum hosted here: https://forum.aerosoft.com/index.php?/forum/919-flightplan-visualizer/ Pelle F. S. Liljendal (pelle@liljendal.dk)

Blackbox A340 LINDA Module

File Description:
LINDA Module for the BBS A340. Tested on P3D V5 (yes, you read that right) and works on V4